Chọn quốc gia khác

//Chọn quốc gia

Indonesia

Tận dụng các cơ hội quốc tế bằng cách tiếp cận thị trường toàn cầu tại Indonesia

IndonesiaProduct safety requirements and regulations are put in place to reduce risks of injury, ensure safety and improve quality of life. Most products entering the Indonesian market must meet the relevant requirements of the authorities depending on the product scope.

These regulations and compliance requirements can however pose challenges to companies who are exploring new markets in Indonesia. You can ensure that your products successfully meet the Indonesian standards by working with a market leader, TÜV SÜD.

TÜV SÜD fully understands the local requirements and procedures applicable in Indonesia. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

CLICK ON THE RESPECTIVE CATEGORIES BELOW TO GET MARKET ACCESS INFORMATION TO EACH CATEGORY

  • Plug Types

    Type C

    Plug C

    Type F

    Plug F

  • Electrical Safety

    Regulatory agency

    National Standardization Agency of Indonesia

    Regulations

    • Both Ministries each regulate a list of electrical and electronic equipment.
    • Importer/Manufacturer who possesses NPB shall affix the NPB underneath SNI mark and/or other recognized conformity mark, onto their products or packages.
    • Product testing by accredited in-country test laboratory and factory quality system control is required.
    • Certificates should be issued by an accredited CB.
    • Compliance with Indonesia National Standards (SNI).

    Guidelines

    Certification procedure*: 

    SNI: 

    • Submission of application and essential documents.
    • Product testing by random sampling.
    • Factory inspection.
    • Obtain certification.
    • Appropriate usage of SNI Mark.

    K3L:

    • Importers/Local producers shall apply for K3L Product Registration by themselves and later receive a Letter of Registration issued by MoT, after that the related registration number shall be labeled on the products, packaging and/ or labels that are easily read.

    * 1. Prior to apply for SNI certificate, the trademark shall be registered in Indonesia.

    2. A Certificate of Conformity (CoC) shall be issued for products tested to comply with SNI XXX and having passed the Factory Surveillance successfully. This CoC is known as SPPT-SNI.

    3. After SPPT-SNI (COC) issued, Goods Registration Letter (SPB) application shall be submitted to the Director General of Foreign by the importer.

    4. A SPB will include NPB (Goods Registration Number). SPB shall be obtained for every import activity.

    Applicable product categories

    SNI product list can be found here

    K3L product list can be found here.

    To determine if a particular product is subject to the above regulations, please contact us.

    Our services at a glance

    TÜV SÜD has the experience and capability to support manufacturers in attaining compliance with Indonesian requirements and obtaining the necessary approval. 

  • Energy Efficiency

    Regulatory agency

    Ministry of Energy and Mineral Resources of Republic of Indonesia (MEMR)

    Regulations

    Mandatory MEPS and energy label for controlled E&E equipment:

    • CFLs - SNI IEC 60669:2009
    • Electronic ballasts - SNI IEC 60929:2009
    • Air-conditioners - SNI IEC 5151:2010

    The energy label shall be affixed on the product after certification.

    Guidelines

    Certification procedure*:

    • Submission of application: The applicant needs to be a local company
    • Testing in lab which is accredited by KAN or designated labs
    • Approval of certification
    • Product labelling as appropriate

    *After test report issued, the manufacturer or importer must issue a written DoC stating his products comply with the relevant standard and submit to MEMR before labeling. Otherwise, it’s not allowed to import into Indonesia.

    Applicable product categories

    To determine if a particular product is subject to the above regulations, please contact us.

    Our services at a glance

    TÜV SÜD has the experience and capability to support manufacturers in attaining compliance with Indonesian requirements and obtaining the necessary approval.

  • Telecom & Wireless

    Regulatory agency

    Directorate General of Posts and Informatics Resources (SDPPI)

    Regulations

    • Certification by type approval of regulated products is required.
    • Product testing should be performed by an in-country test laboratory.*
    • Communication and Informatics Ministry Regulation Number 7 of 2018 (PM Kominfo No 7 Tahun 2018) certification is issued by SDPPI.
    • Products must be marked with SDPPI label and QR code. Besides SRD product, Warning label must be affix on the product.
    • The product label photo must be upload within 30 days after the certificate issued.

    Guidelines

    Certification procedure:

    • Submission of application. The applicant needs to be a local company. The applicant should apply for Online Single Submission(OSS) system by their Business License Number(NIB).
    • Proceed to test in SDPPI-accredited test Lab, which could be in-country SDPPI-accredited test lab or foreign SDPPI-accredited test Lab.
    • Approval of certification.
    • Product labelling as appropriate.

    Applicable product categories

    To determine if a particular product is subject to the above regulations, please contact us.

    Our services at a glance

    TÜV SÜD has the experience and capability to support manufacturers in attaining compliance with Indonesian requirements and obtaining the necessary approval. 

     

KHÁM PHÁ

Sách điện tử: tiếp cận nhanh thị trường toàn cầu cho sản phẩm điện điện tử tuv sud việt nam
Sách điện tử

Tiếp cận thị trường cho các sản phẩm điện

Tổng quan về các yêu cầu tuân thủ toàn cầu cho sản phẩm điện điện tử

Tìm hiểu thêm

CÁC THÔNG TIN LIÊN QUAN

Bước tiếp theo

Chọn vị trí