One of the world’s leading providers of single-phase meter testing and calibration services
One of the world’s leading providers of single-phase meter testing and calibration services
TÜV SÜD National Engineering Laboratory is one of the world’s leading providers of single-phase meter testing and calibration services. We have the expertise to deal with all major metering technology, including turbine meters, Coriolis meters, Venturi meters, ultrasonic meters and densitometers.
Oil Flow Testing Facility
TÜV SÜD National Engineering Laboratory’s oil flow test facility has two separate oil flow lines, that cover a wide range of flow rates and can accommodate a selection of different oils. Combining these oils with a unique temperature control system allows independent variation of test temperature and viscosity. Test sections can be constructed to offer long straight lengths upstream and downstream or, if necessary, specific configurations designed to replicate actual installations.
Water Flow Testing Facility
TÜV SÜD National Engineering Laboratory’s Water Flow Testing Facility has four separate flow lines, covering a wide range of flowrates in multiple line sizes. The test sections can be constructed to offer long straight lengths upstream or, if necessary, specific configurations designed to replicate actual installations.
The facility allows manufacturers and water utility companies to assess a wide variety of instruments and flow meters such as mag, ultrasonic and coriolis meters.
Densitometer Calibration Facility (non UKAS accredited)
TÜV SÜD National Engineering Laboratory manages the only Densitometer Calibration Facility in the UK that allows densitometers to be calibrated at their anticipated operating conditions. This allows companies to follow the guidance of the UK regulator, the Oil & Gas Authority (OGA).
The recently upgraded densitometer calibration facility can calibrate a comprehensive range of meters including Micro Motion 7835 Series Density Meters, Micro Motion CDM100 meters and Sarasota Liquid Density Meters (910 series). The facility also allows us to test densitometers used with fluids with very low densities, for example units that operate on condensate wells.
Elevated Pressure & Temperature Oil Calibration Facility
TÜV SÜD National Engineering Laboratory’s high pressure and temperature single phase calibration loop is a unique, purpose-built flow meter calibration and evaluation facility. It allows customers to test equipment at close to field conditions and replicate the effect of high pressure and temperature on instrument performance.
The facility has two separate flow lines, covering a wide range of flowrates in different line sizes. The test sections can be constructed to offer long straight lengths upstream or, if necessary, specific configurations designed to replicate actual installations.
Hydrogen Domestic Gas Metering Test Facility
TÜV SÜD National Engineering Laboratory’s hydrogen domestic gas metering test facility tests the performance of domestic gas meters. It can investigate not only the performance of existing meter stock but also allow the development of new meters designed specifically for new meters.
WHY CHOOSE TÜV SÜD NATIONAL ENGINEERING LABORATORY?
Our comprehensive testing laboratories are fully equipped to conduct all of a range of testing, including:
TÜV SÜD National Engineering Laboratory is a UKAS accredited calibration laboratory No. 0009, and testing laboratory No.0432, so customers can expect the highest levels of accuracy.
LEARN MORE
Advancing Standards and Guidance for Measuring Wet Gas.
Learn More
Site Selector
Global
Americas
Asia
Europe
Middle East and Africa
