Your regular update for technical and industry information
Your regular update for technical and industry information
November 2024 - ELECTRICAL AND ELECTRONICS
On November 5, 2024, a regulation provision was issued by the Ministry of Economy regarding Resolution 237.
As published in Resolution 237, S-mark will be effective until March 28, 2025. On this date, all products will be marked with another new marking of conformity with the dimension specified below. The marking may be monochromatic or bichromatic. It must be placed before the marketing of the product. Its placement will show that the manufacturer or importer fully complies with the conformity assessment procedure required by Technical Regulation.
It shall be placed in a visible location on the product or on its primary packaging. In case of a small size of product, the minimised dimension may not be less than below size:
In the 3.2 of the Annex to the Provision, an Affidavit of Conformity is mandatory to prepare and to be signed by the local importer before the product commercialisation. This is similar to a self-declaration letter which must include the following information:
1. Manufacturer or importer information:
2. Product information
3. Standards and conformity assessment
4. Other data
Publication reference:
[1] https://servicios.infoleg.gob.ar/infolegInternet/anexos/405000-409999/406152/norma.htmTÜV SÜD has dedicated experts to assist you in the development of consumer products and meeting applicable regulations. Through a global network of laboratories, TÜV SÜD offers a wide range of services that includes chemical tests, physical or mechanical tests as well as inspections to ensure the compliance of your products in target markets.
For enquiries, please contact us at [email protected]
Site Selector
Global
Americas
Asia
Europe
Middle East and Africa