Vietnam

Type A

Type C

Type F

Regulatory agency

• Directorate for Standards, Metrology and Quality (STAMEQ)

Regulations 

• Regulated products that are locally manufactured require mandatory certification and the Vietnam Certification Centre (QUACERT) quality mark.
• Imported products are regulated by import-export goods control and only require a DoC or certification by a third-party Certification Body (CB).
• Compliance with TCVN and/or IEC standards.
• EMC compliance is required for certain products.

Guidelines

CERTIFICATION PROCEDURE

• Testing by designated test laboratory.
• Submission of application and essential documents.
• STAMEQ assessment.
• Obtain Certification.
• Surveillance.

Applicable product categories

• To determine if a particular product is subject to the above regulations, please contact us.
• Safety mark is required for below equipment categories:
  • Instant water heater
  • Storage water heater
  • Appliances for skin or hair care
  • Electric kettle
  • Rice Cooker
  • Electric fan
  • Electric iron
  • Microwave oven
  • Electric grills, toasters and similar portable cooking appliances
  • PVC insulated wires and cables of rated voltages up to and including 450/750V
  • Portable immersion heaters
  • Electric tea and coffee makers
  • Electric hand dryer
• EMC compliance is required for below equipment categories:
  • Electric air-conditioners
  • Electric refrigerators and freezers
  • Electric vacuum cleaners
  • Electric washing machines
  • Fluorescent lamps with built-in ballasts
  • Instant water heaters
  • Radio broadband data transmission equipment
  • Motor operated portable electric drillers

Our services at a glance

• As a listed CB for Vietnam under the ASEAN EE MRA, test reports issued from recognised TÜV SÜD laboratories are accepted by QUACERT for certification. TÜV SÜD can also perform testing and certification for imported products.

REGULATORY AGENCY

•  Ministry of Industry and Trade

REGULATIONS

• On 9 March 2017, Vietnam’s Prime Minister issued Decision No. 04/2017/QD-TTg regulating the list of equipment subject to energy labelling and minimum energy performance within the territory.

• Products approved should be labelled appropriately with the Vietnamese Energy Star logo.

GUIDELINES

• A local representative is required.

ENERGY LABELLING PROCEDURE

• Sample Testing.

• Submission of application, test reports and essential documents.

• Submission of registration to the Ministry of Industry.

• Product labelling.

APPLICABLE PRODUCT CATEGORIES

• Group 1: Straight tube fluorescent lamps, compact fluorescent lamps, electronic ballasts and electronic ballasts for fluorescent lights, air conditioners, refrigerators, household washing machines, electric cookers, electric fans, TVs, LED lights and hot water heaters

• Group 2: Office equipment including copy machines, computer monitors, printers, commercial refrigerated cabinets and laptops

• Group 3: Industrial equipment including distribution transformers and electric motors

• Group 4: Transportation vehicles including cars with 9 seats or less, motorcycles and mopeds

To determine if a particular product is subject to the above regulations, please contact us.

OUR SERVICES AT A GLANCE

• TÜV SÜD has the experience and capability to support manufacturers in attaining compliance with Vietnamese requirements and obtaining the necessary approval. TÜV SÜD can also support manufacturers in obtaining voluntary endorsement labels.

Regulatory agency

• Ministry of Health (MOH)

Regulations

• Medical equipment listed in Appendix 7 of MOH’s Circular No. 08/2006/TT-BYT require registration.
• Medical equipment which are not listed in Appendix 7 and are imported into Vietnam require an import permit issued by the MOH.
• Only Vietnamese companies are allowed to distribute medical devices in Vietnam.

Guidelines

• A Free Sale Certificate from the device’s country of origin is usually required for import.
• License application procedures require that a sample of any new equipment be brought into Vietnam for clinical testing* by medical or healthcare establishments.
• In the future, Vietnam will be required to pass laws with the same provisions as the ASEAN Medical Device Directive (AMDD), an overall regulation that harmonises medical device regulations in ASEAN countries.

* Waivers may be available for equipment of a size and cost that would make it impractical to transport and install as a sample for testing.

Our services at a glance

• TÜV SÜD has the experience and capability to support manufacturers in attaining compliance with Vietnamese requirements and obtaining the necessary approval.

Regulatory agency

• Ministry of Information and Communications of the Socialist Republic of Vietnam (MIC)

Regulations

• Depending on the product, type approval by certification or DoC is required.
• Testing for type approval should be performed by test laboratories approved and listed by the MIC.
• Products approved or declared should be labelled appropriately with ICT Mark of conformity.

Guidelines

• A local representative is required.

TYPE APPROVAL PROCEDURE

• Sample testing.
• Submission of application, test reports and essential documents.
• Obtain Certification.
• Product labelling.

DoC PROCEDURE

• Sample testing.
• Submit DoC and essential documents.
• Acknowledgement of DoC.
• Product labelling.

Applicable product categories

Product categories subject to mandatory type approval include:

• Amplification equipment in the cable TV distribution system
• Terminal Equipment

• Radio equipment

Product categories subject to mandatory DoC include:

• Lithium batteries used for notebook, mobile phone, tablet
• Optical transmission devices
• PABX switchboard
• Personal Computer, server, laptop and portable computer, Personal Digital Assistant (PDA), router, hub, switch, gateway, bridge, firewall
• Set Top Box DVB-T2; Televisions with integrated functions of receiving digital terrestrial television DVB-T2 (iDTV)
• Set top box in digital cable TV network
• Set top box in satellite TV network
• Shipborne watchkeeping receivers for reception of Digital Selective Calling operating in the MF; MF/HF and VHF bands of maritime mobile service (applicable from 1st April 2018)
• Terminal equipment connected to public telecommunications networks using exclusively leased channels
• Terminal equipment to be connected to public telecommunications networks via 2-wire analog interfac

Product categories subject to standards that may use DoC, or type approval, include:   

• Bridges
• Cable connected boxes        
• Desktop personal computers
• Firewalls    
• Gateways
• Hubs   
• Notebook
• Personal digital assistants
• Portable computers  
• Routers
• Servers      
• Switches

To determine if a particular product is subject to the above regulations, please contact us.

Our services at a glance

• TÜV SÜD is an accredited test laboratory that is able to perform testing to applicable standards for DoC.