Choose another country to see content specific to your location

//Select Country

Eurasian Economic Union (EAEU)

Capitalise on the market opportunities in the Eurasian Economic Union

Armenia, Belarus, Kazakhstan, Kyrgyzstan and Russia are members of the Eurasian Economic Union (EAEU) where trade barriers and customs duty are removed to facilitate mutual trade.

Electrical and electronics products entering the EAEU must meet the electrical safety requirements as stipulated by the Eurasian Economic Commission. The EAC mark is a mandatory mark that must be obtained and affixed on products to demonstrate its compliance to the EAEU standard. The product regulation is put in place to provide assurance that the products and services are safe, of good quality and fit for consumers’ needs.

Ensure that your products successfully meet EAEU standards by working with a market leader, TÜV SÜD. TÜV SÜD fully understands the local requirements and procedures applicable under EAEU. You can rely on our expertise and knowledge to help you access key markets efficiently while at the same time, be assured of our objectivity, integrity and professionalism.

CLICK ON THE RESPECTIVE CATEGORIES BELOW TO GET MARKET ACCESS INFORMATION TO EACH CATEGORY

  • Plug types

    Type C

    Plug C

    Type F

    Plug F

  • Electrical Safety

    Regulatory agency

    • Eurasian Economic Commission

    Regulations

    • Technical regulations of the EAEU "On safety of low-voltage equipment" (TR 004/2011) came into force on 15 February 2013.
    • EAC Approval is a singular harmonised Approval Certificate for EMC and/or Safety for certain products. It covers all member states in the union.
    • The product must be marked with the EAC Mark.
    • There are 2 methods of conformity assessment for electrical products: Certification (CoC) and declaration (DoC). The validity is up to 5 years.

    Guidelines

    • A local representative is required for CoC or DoC.

    Conformity Assessment includes:

    • Submission of application, test reports and essential documentation.
    • Factory inspection report.
    • Quality Management System certification (where applicable).
    • The EAC mark should be shown on the product label.
  • EMC

    Regulatory agency

    • Eurasian Economic Commission

    Regulations

    • Technical regulations of the EAEU "On Electromagnetic Compatibility of Technical Devices" (TR 020/2011) came into force from 15 February 2013.
    • The validity is up to 5 years.

    Guidelines

    • A local representative is required for CoC or DoC.

    Conformity Assessment includes:

    • Submission of application, test reports and essential documentation.
    • Factory inspection report.
    • Quality Management System certification (where applicable).
    • The EAC mark should be shown on the product label.
  • More information on CU regulations for electrical safety and EMC

    APPLICABLE PRODUCT CATEGORIES

    • Products with nominal voltage of 50 to 1000 AC and 75 to 1500 DC require CU approval.
    • Products applicable to TR 004/2011
      • Automatic breakers, protective cutout devices
      • Cables, wires and cords
      • Devices for electric energy distribution
      • Electric tools (hand-tools and portable tools)
      • Electrical apparatus and household equipment
      • Electric musical instruments
      • Electrical apparatus for electrotechnical sets control
      • Low-voltage equipment connected to electronics data processing machines
      • Personal computers
    • Products applicable to TR 020/2011
      • Electric household appliances and devices
      • Electric musical instruments
      • Electric tools (hand-tools and portable tools)
      • Personal electronic computing machines (personal computers)
      • Technical products to be connected to personal electronic computing machines

    To determine if a particular product is subject to the above regulations, please contact us.

    WHY CHOOSE TÜV SÜD?

    In today’s competitive markets, consumers prefer products that complies to all regulations and standards. With TÜV SÜD’s conformity verification services, your products will gain a competitive edge in the market. Our experts apply their knowledge of the latest directives and requirements to ensure compliance and avoid costly, time-consuming rework throughout the process.

  • Industrial Products

    Regulatory agency 

    • Eurasian Economic Commission

    Regulations

    • The technical regulation of EAEU "On the safety of machines and equipment" (TR 010/2011) came into force from 15 February 2013. The validity is up to 5 years.
    • The technical regulation of EAEU “On the safety of machines operating on gaseous fuel” (TR 016/2011) came into force from 15 February 2013. The validity is up to 5 years.
    • The technical regulation of EAEU “On safety of high pressure equipment” (TR 032/2013) came into force from 1 February 2014. The validity is up to 5 years.
    • The technical regulation of EAEU “On the safety of equipment for work in dangerously explosive atmospheres” (TR 012/2011) comes into force from 15 February 2013. The validity is up to 5 years.

    GUIDELINES

    • TR 010/2011, TR 016/2011, TR 032/2013:
      • In serial production, the factory should be visited by the expert of the certification body.
      • Tests are carried out in testing laboratory accredited by EAEU. It is possible to conduct the tests on site in presence of the testing laboratory’s expert.
      • The applicant should be an organisation registered on the territory of EAEU.
    • TR 012/2011:
      • An identification criterion of equipment intended for use in explosive atmospheres and Ex-components is the availability of means providing their explosion protection as specified in the manufacturer’s technical documentation, and the explosion-proof marking affixed on the equipment and the Ex-component.
  • More information on CU Regulations for Industrial Products

    APPLICABLE PRODUCT CATEGORIES

    • List of technical means to be TR 010/2011:
      • Agricultural machines
      • All-terrain vehicles, snowmobiles and the trailers
      • Engineering equipment for timber logging, timer deposits and timber rafting
      • Equipment for drilling boreholes and wells, equipment for charging and tamping blast holes
      • Equipment for shaft running and mine transport
      • Equipment for stripping and cleaning works and lining of mine workings
      • Equipment for ventilation and dust retaining
      • Garage equipment for motor vehicles and trailers
      • Household wood working equipment
      • Load lifting machines, load lifting cranes
      • Machines for livestock, poultry farming and feed-processing
      • Mechanised construction and assembly instruments
      • Sinking equipment for mines
      • Small-size mechanised machines for garden and forestry, including forestry electric machines
      • Technological equipment for commerce, catering and public kitchens
    • The equipment for work in dangerously explosive atmospheres must comply with the TR 012/2011.
    • List of technical means to be TR 016/2011:
      • Wheeled vehicles of categories L, M, N and O are designed for use on public roads (hereinafter - the vehicles)
      • Chassis
      • Components of vehicles that have an impact on the safety of vehicles
    • List of technical means to be TR 032/2013:
      • Boilers
      • Equipment parts
      • Indicating and safety devices 
      • Pipelines
      • Valves
      • Vessels

    WHY CHOOSE TÜV SÜD?

    TÜV SÜD has the experience and capability to support manufacturers in attaining compliance requirements and obtaining the necessary approval. 

EXPLORE

E-book

Market access for electrical goods

Overview of compliance requirements worldwide for electrical and electronic goods.

Learn more

VIEW ALL RESOURCES

Next Steps

Select your location

Global

Americas

Asia

Europe

Middle East and Africa