Choose another country to see content specific to your location

//Select Country

加拿大

抓住加拿大的市場機遇

Canada

針對有意將全新產品出口至加拿大的公司集團而言,加拿大的法規與合格要求是一項巨大挑戰。通常,制定當地合格要求與產品法規,目的是為產品和服務的品質與安全提供保障以滿足消費者需求。

絕大多數進入加拿大市場的產品根據產品劃分範圍,都必須滿足對應具體要求。在適用情況下,必須透過由加拿大標準局認可的驗證測試機構進行測試與驗證。

透過與市場領導者—TÜV SÜD合作,確保產品能夠滿足加拿大標準。TÜV SÜD充分理解適用於加拿大的當地要求和申請程序。可以藉助我們的專業知識與技能,順利、有效率地進入加拿大市場,降低風險;我們的客觀性、完整性和專業性也為客戶提供信心保證。

 

分別點擊以下藍色工具列,獲得各項分類的市場許可資訊。

 

  • Plug Types

    Type A

    Plug A

    Type B

    Plug B

  • Electrical Safety

    Regulatory agency

    • Standards Council of Canada (SCC) 

    Regulations

    • Certification must be obtained from an SCC accredited CB.
    • Safety testing is mandatory and factory inspections are required, where applicable.
    • Compliance with CSA, UL and/or IEC standards.

    Guidelines

    • Although certification is not mandatory, it is highly recommended for marketing purposes and offers state-level authorities a sound basis for product evaluation.
    • Certified products are marked by the manufacturer with the mark of the SCC accredited CB

    Applicable product categories

    • To determine if a particular product is subject to the above regulations, please contact us.

    Our services at a glance

    • As a SCC accredited CB, TÜV SÜD can provide electrical safety certification, with the TÜV SÜD NRTL mark, for a range of products including electrical drives, laboratory equipment, industrial control systems, lasers, IT equipment and power supplies.
  • EMC

    Regulatory agency

    • Innovation, Science, and Economic Development Canada (ISED)

    Regulations

    • Manufacturers’ declaration is required for certain products according to ICES standards.

    Guidelines

    • A local representative is required.

    DOC PROCEDURE

    • Test the equipment to verify compliance at an accredited test laboratory.
    • Keep a compliance folder on file.
    • Affix the equipment with the ISED Company Number and ISED Registration Number as stated in the requirements.
    • Register the equipment with the Bureau through E-filing and add the equipment to ISED’s Terminal Equipment List.

    CERTIFICATION PROCEDURE

    • Manufacturers must use an ISED recognised CB.
    • Certified equipment should be labelled in accordance with ISED labelling requirements.

    Applicable product categories

    • A full list of applicable telecom equipment may be found here.
    • A full list of applicable radio equipment may be found here.

    To determine if a particular product is subject to the above regulations, please contact us. 

       
    • Environmental

      Regulatory agency

      • National Resources Canada (NRCan)

      Regulations

      ENERGY EFFICIENCY

      • The Energy Efficiency Regulations are required for many products.
      • Mandatory EnerGuide Program labelling is required for certain products.
      • A lighting product label should be considered for certain product.

      WEEE

      • Manufacturer’s declaration to WEEE programs per province.

      Guidelines 

      • Canada’s EnerGuide labelling requirements are coordinated with the US Energy Guide labelling program.

      Applicable product categories

      Product categories that require mandatory EnerGuide* labelling include: 

      • Clothes dryers
      • Refrigerators and combination refrigerator-freezers
      • Electric ranges          
      • Room air conditioners
      • Freezers
      • Clothes washers
      • Integrated over/under washer-dryers
      • Dishwashers

      Product categories that required a lighting product label include:

      • General service incandescent reflector lamps: PAR, R, ER, BR and BPAR lamps
      • Compact fluorescent lamps
      • General service lamps (common light bulbs) and modified spectrum incandescent lamps

      A full list of Energy Efficiency Regulation product categories may be found here. To determine if a particular product is subject to the above regulations, please contact us.

      The EnerGuide label is voluntary for:

      • Central air conditioners
      • Furnaces (oil, gas or propane-fired)
      • Heat pumps - air source
      • Gas fireplaces
      • Water heaters
       


    為什麼選擇TÜV SÜD?

    TÜV SÜD擁有專業知識和實驗室基礎設施,能夠協助製造商獲得符合加拿大標準與要求的必要驗證許可與合格證明。TÜV SÜD測試報告可被廣泛接受,並受官方國際的認可。同時,TÜV SÜD還可協助製造商獲得自願認可標籤。

    探索

    TÜV SÜD Global Market Access for Electrical and Electronics E-book
    電子書

    Market access for electrical goods

    Overview of compliance requirements worldwide for electrical and electronic goods.

    Learn more

    VIEW ALL RESOURCES

    更多

    Select Your Location

    Global

    Americas

    Asia

    Europe

    Middle East and Africa