Choose another country to see content specific to your location

//Select Country

巴西

抓住巴西的市場機遇

Brazil針對有意將全新產品出口至巴西的公司集團而言,巴西的法規與合格要求是一項巨大挑戰。通常,制定法規與合格要求,以滿足消費者需求。對於進入巴西境內的絕大多數產品而言,必須滿足巴西國家計量、標準化與工業品質協會(INMETRO)規定的產品法規。INMETRO合格標誌同時適用於自願性和強制性驗證計畫。

透過與市場領導者—TÜV SÜD合作,確保產品能夠滿足巴西標準。TÜV SÜD充分理解適用於巴西的當地要求和申請程序。可以藉助我們的專業知識與技能,順利、有效率地進入巴西市場;我們的客觀性、完整性和專業性也為客戶提供信心保證。

分別點擊以下藍色工具列,獲得各項分類的市場許可資訊。

  • Plug Types

    Type C

    Plug C 

    Type N

    Plug N

  • Electrical Safety

    Regulatory agency

    • National Institute of Metrology, Standardisation and Industrial Quality (INMETRO)

    Regulations

    • Mandatory testing and certification are required for certain regulated product categories.
    • Testing must be performed by a Product Certification Body that is accredited by INMETRO.
    • Initial and follow-up factory inspections are required for mandatory certification.
    • Products certified by an INMETRO-accredited body are required to carry the mandatory INMETRO Mark of the certification organisation.
    • Compliance with ABNT, NBR, NM and/or IEC Standards are also required.
    • Products must be marked with the INMETRO Mark.

    Guidelines

    • The INMETRO Mark can be applied to products under mandatory certification lists.
    • Test reports from INMETRO accredited laboratories and/or accredited bodies can be accepted:
      • Inter-American Accreditation Cooperation - IAAC
      • European Cooperation for Accreditation - EA
      • International Laboratory Accreditation Cooperation - ILAC

    Applicable product categories

    • Product categories that require mandatory certification include:
      • Circuit breakers
      • Electrical medical equipment
      • Electronic ballasts for fluorescent lights
      • Equipment for gas systems
      • Explosive atmosphere equipment
      • Household and similar electric appliances
      • Plugs and sockets
      • Street lighting using discharge lamps and LED technology
      • Switches
      • Voltage stabilisers
      • Wires and cables

      To determine if a particular product is subject to the above regulations, please contact us.

  • Energy Efficiency

    Regulatory agency

    National Institute of Metrology, Standardisation and Industrial Quality (INMETRO)

    Regulations

    • Minimum Energy Performance Standards (MEPS) are required for some products.
    • Mandatory energy efficiency labelling is required for certain products.

    Guidelines

    • PROCEL is the national energy efficiency program and INMETRO is responsible for verifying manufacturers’ data.

    Applicable product categories

    Product categories requiring energy labelling include:

    • Air conditioners
    • Ceiling fans
    • Centrifugal pumps
    • Clothes washers
    • Column and air circulators
    • Commercial electric ovens
    • Compact fluorescent lamps
    • Electric water heating
    • Electromagnetic ballasts for high pressure sodium vapour lamps
    • Fan tables
    • Freezers
    • Gas stoves and furnaces
    • Gas water heaters
    • High pressure sodium vapour lamps
    • Incandescent lamps for domestic use
    • Microwave ovens
    • Refrigerators
    • Systems and equipment for photovoltaics
    • Televisions sets
    • Three-phase induction motors squirrel cage rotor

    To determine if a particular product is subject to the above regulations, please contact us.

  • Telecom and Wireless

    Regulatory agency

    • Agência Nacional de Telecomunicações (ANATEL)

    Regulations

    • Approval is required for most telecommunications and wireless equipment.
    • CoC issued by designated CB (OCD) is required for imports, and ANATEL certification is required for the commercialisation and sale of products.
    • Modular approval is accepted for RF.
    • Testing must be performed by accredited in-country test laboratories.
    • Products must be marked with the ANATEL Mark.

    Guidelines

    • A local representative is required.
    • Conformity assessment to Brazilian standards is required to be performed by accredited CABs.
    • Approval requirements may differ depending on which 1 of the 3 categories the equipment is assigned to.
    • Type examination, product quality assurance, and total quality assurance procedures may be performed.

    Applicable product categories

    Approval is required for:

    • All DLL (E1, E3, etc.) equipment
    • All optical interfaces
    • All equipment connecting to the Integrated Services Digital Network (ISDN)
    • All telecommunication terminal equipment
    • All network equipment
    • A wide range of radio products

    To determine if a particular product is subject to the above regulations, please contact us.

探索

TÜV SÜD Global Market Access for Electrical and Electronics E-book
電子書

Market access for electrical goods

Overview of compliance requirements worldwide for electrical and electronic goods.

Learn more

查看所有資源

更多

Select Your Location

Global

Americas

Asia

Europe

Middle East and Africa