Technical monitoring: optimise your building performance

Your building might be new and is equipped with modern building equipment and building automation systems, but you are experiencing:

• Higher energy and operating costs than planned 
• Inexplicable faults in the technical systems that require urgent and costly rectification
• Poor air quality and uncomfortable room temperatures 

Problems with building operation usually arise when the technical building equipment incorrectly integrates with the building automation systems. Technical building equipment such as heating, ventilation and air conditioning (HVAC) is particularly affected. This is typically caused by incorrect design or operation of the supply systems. These errors can result in higher energy and operating costs and CO2 emissions in a short amount of time.

TÜV SÜD Technical Monitoring optimises your building performance

TÜV SÜD technical monitoring recognises these problems through monitoring and assessment of the building performance and provides the basis for optimisation.

TÜV SÜD data box is installed at the interface of the building automation to collect the operating data. The data is then analysed in a target vs actual comparison to uncover the underlying problems and derive optimisation measures. Many existing users are convinced of the results and continued to use it in the long run.

The parameters of your technical building equipment and building performance can be observed in a clear and intuitive dashboard. 

Download infosheet

TÜV SÜD stepwise approach

The benefits of analysing your building performance using TÜV SÜD technical monitoring

• Reduce the energy and operating costs of your property
• Minimise your effort and costs for troubleshooting
• Increase user satisfaction
• Increase the value of your property in the long run
• Minimise the wear and tear of the technical systems
• Allow you to achieve your sustainability goals through optimal building operation and minimsed CO2 emissions

Technical monitoring provides invaluable insights for optimising your building operation and building control to comply with international and local building energy efficiency standards and sustainability regulations such as Building Energy Act (GEG) or the EU Building Directive (EPBD) in Germany.