Choose another country to see content specific to your location

//Select Country

News Listing

TÜV SÜD are proud sponsors of the Expert Programme for Product Safety Professionals event

11.02.2020

When Geraldine Cosh told us about her idea to run a safety training programme for anyone working within the consumer product industry we immediately wanted to be involved. As a leading product safety organisation, we are delighted to be involved with this event and to support Geraldine from the outset.

TÜV SÜD – life-cycle partner of the real-estate industry

11.02.2020

At Bosch Connected World 2020 from 19 to 20 February 2020 in Berlin, TÜV SÜD will showcase its comprehensive service offer for smart and sustainable buildings.

Steps towards condition-based calibration through data models and statistical analysis

06.02.2020

As flow metering technologies become more digital, the volume of data generated has increased dramatically. Condition-based monitoring is where data output by digital devices is used to assess performance. TÜV SÜD National Engineering Laboratory is working on a project focused on the diagnostic and predictive capability of these systems

First customer-led job in TÜV SÜD National Engineering Laboratory’s new Advanced Multiphase Facility

04.02.2020

TÜV SÜD National Engineering Laboratory’s new Advanced Multiphase Facility (AMF) has just completed one of the most challenging 14-inch multiphase flow meter tests, which was the first customer-led project.

Comprehensive expertise in testing of wood-burning heating appliances

30.01.2020

Manufacturers of wood-burning heating appliances face increasingly strict requirements, set forth in the EU Regulations associated with the Ecodesign and Energy Labelling Directives as well as in the standard EN 16510-1.

Power-to-Gas expansion on steep growth path

28.01.2020

At the beginning of the year 2019, LBST reported that power-to-gas (PtG) is increasingly used in a number of industrial size applications in Germany. At that time, 50 plants with a total electrical capacity of approx. 50 MW were in operation or planned.

TÜV SÜD National Engineering Laboratory Expert Announced as a Nominee at Offshore Achievement Awards

23.01.2020

TÜV SÜD National Engineering Laboratory’s Fluid Properties Expert, Dr Edris Joonaki, has been shortlisted at the 34th Offshore Achievement Awards (OAA), in the “Young Professional Award” category.

TÜV SÜD is now a member of Amazon's packaging network

14.01.2020

TÜV SÜD is now a member of the Amazon Packaging Support and Supplier (APASS) network. Given this, TÜV SÜD's experts are authorised to perform assessment, testing and certification of packaging used by suppliers and intermediaries in the network according to international standards.

Academic Success for TÜV SÜD National Engineering Laboratory’s Dr Gordon Lindsay

08.01.2020

TÜV SÜD National Engineering Laboratory’s Dr Gordon Lindsay has recently been awarded an Engineering Doctorate from Coventry University.

Flow Metrology is on the Horizon for the Life Sciences

08.01.2020

There is a future for flow measurement within the Life Sciences – a new industrial sector for the TÜV SÜD National Engineering Laboratory - according to a report written by its newly-appointed Head of Life Sciences, Dr Tracy Brown, for the Institute of Measurement and Control’s Flow Measurement Special Interest Group. Following a period of intensive horizon scanning across the sector, work is now underway to develop tangible project proposals with potential collaborators from industry, innovation centres, academia and the NHS in the primary areas experiencing flow metrology challenges.

Next Steps

Select your location

Global

Americas

Asia

Europe

Middle East and Africa