Choose another country to see content specific to your location

//Select Country

Certification Forms

Adding value with our service portfolio

common Guidance

APPLICABLE TO RED (ANNEX III), MED (MOD B & G, F), EMC, MACHINERY, FCC, ISED & JAPAN PRODUCT SCHEMES

Common guidance documents to be downloaded in addition to the scheme documentation below.

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT AP014 - Marks Associated With TÜV SÜD BABT Certification Schemes - Guidance Document
Click here
BABT 766 - Sources of Test Reports For TÜV SÜD BABT Product Certification - Guidance Document
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK AP014 - Marks Associated With TÜV SÜD Danmark Aps Certification Schemes - Guidance Document
Click here
DK 766 - Sources of Test Reports For TÜV SÜD Danmark Product Certification - Guidance Document
Click here

Radio Equipment Directive (RED) 2014/53/EU

RED Annex III - Type Examination

The Radio Equipment Directive (RED) enables manufacturers of products within its scope to affix the "CE" mark to the products. The Type Examination procedure involves the submission of compliance documentation for assessment:

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 725 - Implementation of Annex III Module B of Radio Equipment Directive 2014/53/EU – EU Type Examination - Guidance Document
Click here
BABT 500 - Application for TÜV SÜD BABT Certification under Annex III Module B, EU-Type Examination, of Radio Equipment Directive (RED) 2014/53/EU - Application Form
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 725 - Implementation of Annex III Module B of Radio Equipment Directive 2014/53/EU – EU Type Examination - Guidance Document
Click here
DK 500 - Application for TÜV SÜD Danmark  Certification under Annex III Module B, EU-Type Examination, of Radio Equipment Directive (RED) 2014/53/EU - Application Form
Click here

RED ANNEX IV - FQA Approval

The Radio Equipment Directive (RED) enables manufacturers of products within its scope to affix the "CE" mark to the products. The Full Quality Assurance procedure involves a quality system assessment of the manufacturer’s design, manufacture, inspection and testing capability.

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 727 - Implementation of Annex IV (Full Quality Assurance) of Radio Equipment Directive 2014/53/EU - Guidance Document
Available on email request
BABT 942 - Application for TÜV SÜD BABT Certification Under Annex IV of the Radio Equipment Directive (RED) - Application Form
Available on email request
BABT AF068 - Application for transfer of a Radio Equipment Directive (RED) Full Quality Assurance (FQA) Approval to TÜV SÜD BABT - Application Form
Available on email request

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 727 - Implementation of Annex IV (Full Quality Assurance) of Radio Equipment Directive 2014/53/EU - Guidance Document
Available on email request
DK 942 - Application for TÜV SÜD DanmarkCertification Under Annex IV of the Radio Equipment Directive (RED) - Application Form
Available on email request
DK AF068 - Application for transfer of a Radio Equipment Directive (RED) Full Quality Assurance (FQA) Approval to TÜV SÜD Danmark- Application Form
Available on email request

Marine EQUIPMENT DIRECTIVE

Modules B & G

This scheme enables a manufacturer (or Authorised Representative) of a products within the scope of the Marine Equipment Directive to obtain either a Module B Type Examination Certificate or for single or a very limited number of items a Module G Unit Verification Certificate.

We will assess your test data and supporting information for compliance with either the Type Examination (Module B) or Unit Verification (Module G) requirements.

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 740 - A guide to the TÜV SÜD BABT Implementation of the Marine Equipment Directive - Guidance Document
Click here
BABT 775 - Application for a Marine Equipment Directive Module B (type examination) or Module G (Unit Verification) Certificate from TÜV SÜD BABT - Application Form
Click here
BABT 806 - Application to transfer Marine Equipment Directive Module B Type Examination Certification to TÜV SÜD BABT - Application Form
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 740 - A guide to the TÜV SÜD Danmark Implementation of the Marine Equipment Directive - Guidance Document
Click here
DK 775 - Application for a Marine Equipment Directive Module B (type examination) or Module G (Unit Verification) Certificate from TÜV SÜD Danmark - Application Form
Click here
DK 806- Application to transfer Marine Equipment Directive Module B Type Examination Certification to TÜV SÜD Danmark - Application Form
Click here

MODULES D & E

The scheme enables a manufacturer (or Authorised Representative) of product within the scope of the Marine Equipment Directive to obtain either a Module D Production Quality Assurance Certificate, or a Module E Product Quality Assurance Certificate for the facility which performs the final assembly of the product. Holders of a Module B (Type Examination Certificate), and either a Module D or E Certificate covering the same product may apply for a Certificate of Conformity with permits the placing of the Wheel Mark on their product.

We will assess the Quality Management System of the location who perform the final assembly for compliance with the requirements of Module D (Production Quality Assurance) or Module E (Product Quality Assurance.

Note: These routes are most useful where you manufacture several different product designs and where continuous manufacture for the European Market is intended.

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 791 - TÜV SÜD BABT Implementation of Module D (Production Quality Assurance) and Module E (Product Quality Assurance) of the Marine Equipment Directive - Guidance Document
Click here
BABT 339 - Application for a Marine Equipment Directive Module D (Production Quality Assurance) or Module E (Product Quality Assurance) Certificate - Application Form
Click here
BABT 789 - Application to transfer a Marine Equipment Directive Module D (Production Quality Assurance) or Module E (Product Quality Assurance) Certificate to TÜV SÜD BABT - Application Form
Click here
BABT 792 - Application for the addition of products to a Marine Equipment Directive Module D (Production Quality Assurance) or module E (Product Quality Assurance) Certificate - Application Form
Click here
BABT 340 - Current version
Click here
BABT 340 - Future version (check effective date)
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 791 - TÜV SÜD Danmark Implementation of Module D (Production Quality Assurance) and Module E (Product Quality Assurance) of the Marine Equipment Directive - Guidance Document
Click here
DK 339 - Application for a Marine Equipment Directive Module D (Production Quality Assurance) or Module E (Product Quality Assurance) Certificate - Application Form
Click here
DK 789 - Application to transfer a Marine Equipment Directive Module D (Production Quality Assurance) or Module E (Product Quality Assurance) Certificate to TÜV SÜD Danmark - Application Form
Click here
DK 792 - Application for the addition of products to a Marine Equipment Directive Module D (Production Quality Assurance) or module E (Product Quality Assurance) Certificate - Application Form
Click here

MODULE F

The scheme enables a manufacturer (or Authorised Representative) of product within the scope of the Marine Equipment Directive to obtain a Module F Product Verification Certificate of Conformity for a batch of production items. The Scheme requires the following 3 steps:

  • Obtain a Module B Type Examination Certificate
  • Apply for and obtain a Product Verification Agreement covering the Test and Sample Plan for each batch
  • Apply the required tests to the agreed sample and apply for Product Verification Certificate of Conformity which permits the use of the Wheelmark on that batch of product.

We will agree a test and sampling plan for a batch production items; we then assess the test results on each sample against the agreed plan and limits. This is the implementation of the Product Verification (Module F) requirements.

Note: This route is most useful for single batch production and where the product is already manufactured but now intended for the European Market.

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 741 - TÜV SÜD BABT Implementation of the Marine Equipment Directive Module F (Product Verification) - Guidance Document
Click here
BABT 776 - Application for a Marine Equipment Directive Module F Product Verification Agreement - Application Form
Click here
BABT 781 - Application for a Marine Equipment Directive Module F Product Verification Certificate - Application Form
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 741 - TÜV SÜD Danmark Implementation of the Marine Equipment Directive Module F (Product Verification) - Guidance Document
Click here
DK 776 - Application for a Marine Equipment Directive Module F Product Verification Agreement - Application Form
Click here
DK 781 - Application for a Marine Equipment Directive Module F Product Verification Certificate - Application Form
Click here

emc directive

The Electromagnetic Compatibility (EMC) Certification Scheme operates in accordance with the UK EMC Regulations.

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 300 - Application for TÜV SÜD BABT Certification under EMC Directive 2014/30/EU Annex III Module B, EU-Type Examination
Click here
BABT 746 - TÜV SÜD BABT Implementation of Annex III Module B, of EMC Directive 2014/30/EU - EU-Type Examination 
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 300 - Application for TÜV SÜD Danmark Certification under EMC Directive 2014/30/EU Annex III Module B, EU-Type Examination 
Click here
DK 746 - TÜV SÜD Danmark Implementation of Annex III Module B, of EMC Directive 2014/30/EU - EU-Type Examination 
Click here

Machinery Directive

MACHINERY DIRECTIVE (2006/42/EC) NOTIFIED BODY TYPE

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 804 - Guide to the TÜV SÜD BABT Implementation of Annex IX of the Machinery Directive
Click here
BABT 805 - Application for a Machinery Directive Type Examination Certificate from TÜV SÜD BABT 
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 804 - TÜV SÜD Danmark Implementation of Annex IX of the Machinery Directive
Click here
DK 805 - Application for a Machinery Directive Type Examination Certificate from TÜV SÜD Danmark
Click here

Machinery Directive (2006/42/EC) Attestation Type

UK CERTIFICATION FORMS AND GUIDES (TÜV SÜD BABT)

BABT 807 - Attestation of Equipment to the Machinery Directive by TÜV SÜD BABT 
Click here
BABT 808 - Application for a Machinery Directive Attestation from TÜV SÜD BABT 
Click here

DANMARK CERTIFICATION FORMS AND GUIDES (TÜV SÜD DANMARK APS)

DK 807 - Attestation of Equipment to the Machinery Directive by TÜV SÜD Danmark
Click here
DK 808 - Application for a Machinery Directive Attestation from TÜV SÜD Danmark 
Click here  

metering and billing

The Metering and Billing Certification and Approval scheme certifies / approves Regulated Providers (Operators) for compliance with the Ofcom Metering and Billing Direction (2017) in accordance with the Communications Act 2003.

BABT 625 - Application for TÜV SÜD BABT Attestation - Application Form
Click here

Metering And Billing Direction (2017) documents:  

BABT 680 - Guide to the TÜV SÜD BABT Implementation of the 2008 Ofcom Metering and Billing Scheme - Guidance Document
available on email request
BABT 685 - Application for TÜV SÜD BABT Metering and Billing Approval - Application Form 
Click here
BABT 677 - M&B TMBS Notification Form - General Administration 
Click here
BABT 678 - M&B EPF Notification Form - General Administration 
Click here

FCC Certification

US Radio and EMC TCB/CAB

This scheme enables manufacturers of products which are intentional and unintentional radiators within the scope of FCC 47 CFR to obtain an equipment authorisation through TÜV SÜD BABT as a Telecommunications Certification Body (TCB) / Conformity Assessment Body (CAB), and where appropriate filing with the FCC, to enable the supply of products in the USA.

BABT 735 - A Guide to applying for US Equipment Authorisation for Intentional and Unintentional radiators through TÜV SÜD BABT as a TCB - Guidance Document
Click here
BABT 736 - Application for Equipment Authorisation by TÜV SÜD BABT operating as a US TCB for licensed and un-licensed radio devices and unintentional radiators - Application Form
Click here

US Telephony TCB Scheme

This scheme enables manufacturers of products within the scope of FCC 47 CFR Part 68 to obtain an equipment approval through TÜV SÜD BABT as a Telecommunications Certification Body (TCB), to enable the supply of products in the USA.

BABT 738 - A guide to applying for US Equipment Approval for telephony terminal equipment through TÜV SÜD BABT as a TCB - Guidance Document
Click here
BABT 739 - Application for Equipment Approval and filing for telephone terminal equipment by TÜV SÜD BABT operating as a US TCB - Application Form
Click here

Innovation, Science and Economic Development Canada (ISED)

The scheme enables a manufacturer of radio equipment to achieve Innovation Science and Economic Development (ISED) listing to market the equipment within Canada after obtaining an Innovation Science and Economic Development (ISED) Type Acceptance Certificate by TÜV SÜD BABT.

BABT 755 - A Guide to applying for Canadian Radio Equipment listing through TÜV SÜD BABT as an FCB Scheme - Guidance Document
Click here
BABT 756 - Application for Canadian Radio Equipment Listing through TÜV SÜD BABT Operating as an FCB - Application Form
Click here
BABT 758 - FCB Pro-forma Test Report Cover Sheet - Application Form
Click here
BABT 759 - RSS-102 Annex A RF Technical Brief Cover Sheet - Application Form
Click here

Japanese Radio Approval

TÜV SÜD BABT is able to process applications for unlicensed radio devices intended for the Japanese market. Its scope as a Registered Foreign Conformity Assessment Body under the EU - Japan MRA is for the following specified radio equipment under Article 38-2, paragraph 1, item 1 of the Japanese Radio Law:

BABT 751 - A guide to applying for TÜV SÜD BABT Certification of Radio Devices Under the EU – Japan MRA to gain access to the Japanese Market - Guidance Document
Click here
BABT 752 - Application for TÜV SÜD BABT Approval under The EU – Japan MRA - Application Form
Click here

Microgeneration Certification Scheme

TÜV SÜD BABT is an accredited MCS certification body and one of the world’s leading certification bodies, whose global brand is widely respected. You can benefit from a global network of competent auditors.

BABT 656 - Application for BABT MCS PV Product Certification - Application Form
Click here
BABT 657 - Guide to the TÜV SÜD BABT implementation of the MCS Scheme - Guide
Click here

Next Steps

Select your location

Global

Americas

Asia

Europe

Middle East and Africa