Exploring the Relationship between Speed of Sound, Density, and Isentropic Exponent
Presenter: Christian Hågenvik, Equinor
Correction for Orifice Plates installed in Reverse Orientation, CFD or Flow Testing
Presenter: Nadezhda Pashnina, Emerson
How a National Standards liquid flow facility was successfully moved by using the uncertainty budget as a guide.
Presenter: Erik Smits, VSL National Metrology Institute
Field testing and verification of Xsens flow and water cut Meter with PDO
Presenter: Kjell Rune Toftevåg, Xsens
Enhancing Wet Gas Metering Accuracy through Integration of Neural Network and Physical Principles
Presenter: Seyedahmad Hosseini, Glasgow Caledonian University
Development of an Adjustable Cone Meter for Wet-gas applications
Presenter: Gavin Munro, GM Flow Measurement Services
Coriolis Flow Technology in CO2 and H2: Key questions and answers for reliable measurement
Presenter: Yaser Alghanmi, Emerson
CO2 gas meter performance in CCUS applications
Presenter: Dennis van Putten, DNV
The Certainty of Uncertainty in Uncertainty in Subsea CO2 Metering
Presenter: Alistair Collins, Solartron ISA
Can a water flow calibration transfer to dense phase carbon dioxide with the presence of impurities?
Russell Brown, TÜV SÜD
Challenges in non-invasive clamp-on flow measurement of hydrogen and hydrogen-blended natural gas ‒ experiences from the field and laboratory
Presenter: Flexim GmbH, Eike Schwede
Initial findings on repurposing existing natural gas networks for hydrogen
Presenter: Catherine Jones, Kelton Engineering
Hydrogen in natural gas - analytical considerations
Presenter: Douglas Pettigrew, Emerson
Practical Experience, Challenges and Solutions at Testing and Calibrating of Hydrogen Ultrasonic Flow Meters
Presenter: Aleksandr Andreev, SICK Engineering GmbH
Challenges in 2024 with Flare Measurement and Real-World Examples
Presenter: Younis Al Riyami, PDO
Quantifying Uncertainty in Offshore Flare Emission Calculations: A Comprehensive Analysis
Presenter:Phil Stockton, Accord ESL
Providing confidence in the use of CFD-based correction factors for flare gas flow rates
Presenter: Lefki Germanou, TÜV SÜD
Discussion on The Underplaying of Ultrasonic Meter Diagnostic
Presenter: Richard Steven, Kelton
Streamlining Daily Production Reporting with IIoT: Case Study of 3R Petroleum Brazil
Presenter: Anwar Sutan, i-Vigilant Technologies
Streamlining Selection and Surveillance: An end-to-end Lifecycle Tool for Well Test.
Presenter: Wan Adrie Wan Ahmad, Petronas
Liquid Hydrogen Transport Landscape
Presenter: Yessica Arellano, SINTEF Energy Research
Cybersecurity Considerations for Flow Measurement
Presenter: Hosam Ismail, Emerson Automation Solutions
Online measurement of impurities in CO2 by using electrical
permittivity
Presenter: Stein-Arild Tjugum, Emerson Roxar
Exploring the relationship between speed of sound, density, and isentropic exponent
Presenter: Christian Hågenvik, Equinor
Correction for Orifice Plates installed in Reverse Orientation, CFD or Flow Testing?
Presenter: Nadezhda Pashnina, Emerson
How a National Standards liquid flow facility was successfully moved by using the uncertainty budget as a guide.
Presenter: Erik Smits, VSL National Metrology Institute
Field testing and verification of Xsens flow and water cut Meter with PDO
Presenter: Kjell Rune Toftevåg, Xsens
Ultrasonic wet gas flow meter design aspects, test work and application in tank battery
Presenter: Rolf Sonderkamp, Endress+Hauser
The Certainty of Uncertainty in Uncertainty in Subsea CO2 Metering
Presenter: Alistair Collins, Solartron ISA
Can a water flow calibration transfer to dense phase carbon dioxide with the presence of impurities?
Presenter: Russell Brown, TÜV SÜD
Initial findings on repurposing existing natural gas networks for hydrogen
Presenter: Catherine Jones, Kelton Engineering
Hydrogen in natural gas - analytical considerations
Presenter: Douglas Pettigrew, Emerson
Challenges in 2024 with Flare Measurement and Real-World Examples
Presenter: Younis Al Riyami, PDO
Reducing Flare Mass Flow Uncertainty
Presenter: Tony Skelding, ABLE Instruments
Providing confidence in the use of CFD-based correction factors for flare gas flow rates
Presenter: Lefki Germanou, TÜV SÜD
Streamlining Daily Production Reporting with IIoT: Case Study of 3R Petroleum Brazil
Presenter: Anwar Sutan, i-Vigilant Technologies
Industry Guidelines for Setting the CO2 Specification in CCUS Chains
Presenter: David Simon, Wood PLC
Hydrogen gas flow traceability transfer standard for the gas grid
Presenter: Marcel Workamp, VSL
TÜV SÜD LD HFTS for verifying hydrogen refuelling stations against OIML R139
Presenter: Revata Seneviratne, TÜV SÜD
Online measurement of impurities in CO₂ using electrical permittivity
Presenter: Stein-Arild Tjugum, Emerson
High Pressure Hydrocarbon Separation Performance for Variation in Operational Parameters – Pseudo Dry Gas
Presenter: Zak Lati, TÜV SÜD
Liquid Hydrogen Transport Landscape
Presenter: Yessica Arrelano, SINTEF Energy Research
TÜV SÜD National Engineering Laboratory is the world’s foremost authority on flow measurement technology. Combining international reach with ground-breaking research and development, TÜV SÜD National Engineering Laboratory works with many of the world’s market-leading flow meter manufacturers, flow measurement and instrumentation companies, global operators, and industry regulators.
TÜV SÜD National Engineering Laboratory is also the UK’s Designated Institute for Flow Measurement, under contract from DSIT, and part of the UK’s National Measurement System.
Find out more about our flow measurement services
Site Selector
Global
Americas
Asia
Europe
Middle East and Africa
