Choose another country to see content specific to your location

//Select Country

Brasile

Sfruttare le opportunità di mercato in Brasile

BrasileI regolamenti e i requisiti di conformità possono tuttavia rappresentare una sfida per le aziende che desiderano esplorare nuovi prodotti in Brasile. Tali regolamenti e requisiti di conformità sono messi in atto per garantire che i prodotti e i servizi siano sicuri, di buona qualità e adatti alle esigenze dei consumatori.

Per la maggior parte dei prodotti che fanno ingresso nel territorio brasiliano, è necessario che soddisfi le normative sui prodotti stabilite dall'Istituto nazionale di metrologia, standardizzazione e qualità industriale (INMETRO). Il marchio di conformità INMETRO è applicabile a programmi di certificazione sia volontari sia obbligatori.

Potrete assicurare che i vostri prodotti soddisfino con successo gli standard brasiliani collaborando con un organismo esperto come TÜV SÜD. TÜV SÜD si avvale di professionisti che conoscono perfettamente requisiti e procedure locali applicabili in Brasile. Potete fare affidamento sulla nostra esperienza e conoscenza in modo da aiutarvi ad accedere ai mercati brasiliani in modo efficiente e allo stesso tempo essere sicuri della nostra obiettività, integrità e professionalità.

CLICCARE SULLE CATEGORIE SOTTOSTANTI PER OTTENERE INFORMAZIONI SULL'ACCESSO AL RELATIVO MERCATO

  • Plug Types

    Type C

    Plug C 

    Type N

    Plug N

  • Electrical Safety

    Regulatory agency

    • National Institute of Metrology, Standardisation and Industrial Quality (INMETRO)

    Regulations

    • Mandatory testing and certification are required for certain regulated product categories.
    • Testing must be performed by a Product Certification Body that is accredited by INMETRO.
    • Initial and follow-up factory inspections are required for mandatory certification.
    • Products certified by an INMETRO-accredited body are required to carry the mandatory INMETRO Mark of the certification organisation.
    • Compliance with ABNT, NBR, NM and/or IEC Standards are also required.
    • Products must be marked with the INMETRO Mark.

    Guidelines

    • The INMETRO Mark can be applied to products under mandatory certification lists.
    • Test reports from INMETRO accredited laboratories and/or accredited bodies can be accepted:
      • Inter-American Accreditation Cooperation - IAAC
      • European Cooperation for Accreditation - EA
      • International Laboratory Accreditation Cooperation - ILAC

    Applicable product categories

    • Product categories that require mandatory certification include:
      • Circuit breakers
      • Electrical medical equipment
      • Electronic ballasts for fluorescent lights
      • Equipment for gas systems
      • Explosive atmosphere equipment
      • Household and similar electric appliances
      • Plugs and sockets
      • Street lighting using discharge lamps and LED technology
      • Switches
      • Voltage stabilisers
      • Wires and cables

      To determine if a particular product is subject to the above regulations, please contact us.

  • Energy Efficiency

    Regulatory agency

    National Institute of Metrology, Standardisation and Industrial Quality (INMETRO)

    Regulations

    • Minimum Energy Performance Standards (MEPS) are required for some products.
    • Mandatory energy efficiency labelling is required for certain products.

    Guidelines

    • PROCEL is the national energy efficiency program and INMETRO is responsible for verifying manufacturers’ data.

    Applicable product categories

    Product categories requiring energy labelling include:

    • Air conditioners
    • Ceiling fans
    • Centrifugal pumps
    • Clothes washers
    • Column and air circulators
    • Commercial electric ovens
    • Compact fluorescent lamps
    • Electric water heating
    • Electromagnetic ballasts for high pressure sodium vapour lamps
    • Fan tables
    • Freezers
    • Gas stoves and furnaces
    • Gas water heaters
    • High pressure sodium vapour lamps
    • Incandescent lamps for domestic use
    • Microwave ovens
    • Refrigerators
    • Systems and equipment for photovoltaics
    • Televisions sets
    • Three-phase induction motors squirrel cage rotor

    To determine if a particular product is subject to the above regulations, please contact us.

  • Telecom and Wireless

    Regulatory agency

    • Agência Nacional de Telecomunicações (ANATEL)

    Regulations

    • Approval is required for most telecommunications and wireless equipment.
    • CoC issued by designated CB (OCD) is required for imports, and ANATEL certification is required for the commercialisation and sale of products.
    • Modular approval is accepted for RF.
    • Testing must be performed by accredited in-country test laboratories.
    • Products must be marked with the ANATEL Mark.

    Guidelines

    • A local representative is required.
    • Conformity assessment to Brazilian standards is required to be performed by accredited CABs.
    • Approval requirements may differ depending on which 1 of the 3 categories the equipment is assigned to.
    • Type examination, product quality assurance, and total quality assurance procedures may be performed.

    Applicable product categories

    Approval is required for:

    • All DLL (E1, E3, etc.) equipment
    • All optical interfaces
    • All equipment connecting to the Integrated Services Digital Network (ISDN)
    • All telecommunication terminal equipment
    • All network equipment
    • A wide range of radio products

    To determine if a particular product is subject to the above regulations, please contact us.

Come possiamo aiutarti?

Select Your Location

Global

Americas

Asia

Europe

Middle East and Africa