Building products and construction materials testing laboratory

Our local capabilities to ensure your building and construction products meet regulatory requirements

Our local capabilities to ensure your building and construction products meet regulatory requirements

BUILDING PRODUCTS AND CONSTRUCTION MATERIALS TESTING LABORATORY

Our building products and construction materials testing laboratory have been developed to support manufacturers, importers and retailers to achieve regulatory compliance. Our local and global experts can provide complete testing services for various building and construction products.

RANGE OF PRODUCTS TESTED

  • Partition
  • Glass
  • Plastics piping
  • Door closer
  • Door hinge
  • Building materials and structures
  • Ventilation fan
  • Installed storefronts, curtain walls and slope glazing systems
  • Thermal insulation product
  • Radiant barrier and reflective insulation
  • Aluminium alloy windows and framed sliding glass doors
  • Plastics

STANDARDS THAT WE TEST FOR

  • BS / BS EN - British Standard
  • SS - Singapore Standard
  • MS - Malaysia Standard
  • ISO / EN ISO - International Standard
  • AAMA - American Architectural Manufacturer's Association
  • AS/NZS - Australian/New Zealand Standard
  • ASTM - American Society for Testing Materials

PRODUCT CATEGORY, TESTING SCOPE AND STANDARDS

 

  • Building Materials & Structure Test
    • Ceiling Panel Load Test - Client own test method
    • Door Closer Test - BS EN 1154:1997
    • Door Hinge Test - BS EN 1935:2002
    • High Temperature Fan Test - BS EN 12101-3:2015
    • Non-combustibility Test - BS EN 476:Part 4:1970, BS EN 476:Part 11:1982 & BS EN ISO 1182:2010
  • Exterior Windows, Skylights, Doors & Curtain Walls
    • On-site balustrade test - BS 6399-1: 1996 Clause 10 & AS 1288 : 2006 Section 7
    • On-site water penetration test - ASTM E1105-15
  • Glass Test
    • Boil Test - MS 1498:2017
    • Drop Ball Test - MS 1498:2017
    • Fragmentation Test - MS 1498:2017
    • Safety Glass Impact Test - MS 1498:2017 & BS EN 12600:2002
    • Surface Compression Test - MS 1498:2017
    • Water Field Leakage Test for Façade - AAMA 501.2:2009
  • Insulation Material Test
    • Flatness MS 2340:2010, EN 825:1994
    • Length and Width MS 2325:2010, EN 822:1994
    • Squareness MS 2342:2010, EN 824:1994
    • Thermal Conductivity Test - MS ISO 8302:2003 , ISO 8302:1991, BS EN 12667:2001 & ASTM C177-19
    • Thickness MS 2339:2010, EN 823:1994
  • Plastic Pipe & Fitting Test
    • Charpy Impact - ISO 9854-1:1994
    • Heat Deflection - ISO 75-1:2013 & ASTM D648-18
    • Hydrostatic Pressure Test - ISO 1167-1:2006
    • Longitudinal Reversion - ISO 2505: 2005
    • Melt Flow Rate - ISO 1133-1:2011
    • Thermal Cycling Test – ISO 19893:2011 & BS EN 12293:2000

     

  • Radiant Barrier Test
    • Folding Endurance Test - AS/NZS 1301.423:1997
    • Resistance to dry delamination AS/NZS 4201.1:1994
    • Resistance to wet delamination AS/NZS 4201.2:1994
    • Shrinkage AS/NZS 4201.3:1994
  • Wall Partition System Test
    • Crowd pressure - BS 5234:Part 2:1992
    • Displacement (mm) - BS 5234:Part 2:1992
    • Door slam - BS 5234:Part 2:1992
    • Lightweight anchorages (pull-out & pull-down) & Heavyweight anchorages (wash basin & wall cupboard) - BS 5234:Part 2:1992
    • Maximum deflection (mm) - BS 5234:Part 2:1992
    • Small hard body impact (surface damage & perforation) & Large soft body impact (damage & structural damage) - BS 5234:Part 2:1992
    • Stiffness - BS 5234:Part 2:1992

     

  • Window & Sliding Door Test
    • Operation Test - MS 832:2011 & MS 1017:2012
    • Weathertightness Test - MS 832:2011 & MS 1017:2012
  • Accreditation for the laboratory

    TÜV SÜD Malaysia laboratory is accredited under Department of Standards Malaysia (DSM) to ISO/IEC17025:2005 . Click here to learn more

 

CONTACT US

If you require further information, please contact our experts at [email protected]

Next Steps

Site Selector