국가별 업데이트된 최신 규정을 확인하세요
국가별 업데이트된 최신 규정을 확인하세요
TÜV SÜD GLOBAL MARKET ACCESS (GMA) 팀에서는 각 국가별 시장 진출을 위해 필요한 규정 및 규격을 발빠르게 업데이트 하고 있습니다. 아래 월별로 발행된 2021년 GMA 뉴스레터 내용을 확인하시기 바랍니다.
최신 소식을 받고자 하시는 분들께서는 왼쪽 상단의 '뉴스레터 구독하기' 버튼을 통해 구독해 주시기 바랍니다.
태국: 안전
가정용 및 유사 전기제품에 관한 산업표준 TIS 60335-2(39) 제정 - 안전, 제2-39부: 상업용 전기 다목적 조리용 팬에 대한 특별요구사항, 공고 제6164, 2021년
시행(2021년 9월 2일 이후)
태국 산업부가 2021년 5월 5일에 발표한 본 고시는 가정용 및 유사 전기제품 - 안전, 파트 2-39: 상용 전기 다목적 조리용 팬에 대한 특정 요구 사항을 제품 표준에 따라 산업 표준 TIS 60335 Part 2(39)-2564를 제정합니다.
이 표준은 IEC 60335-1에 기초하고 있으며 가정용 및 이와 유사한 사용을 목적으로 하지 않은 전기 작동 상업용 다목적 조리용 팬의 안전성을 다루고 있으며, 정격 전압은 1상 및 중성 사이에 연결된 단상 기기의 경우 250V, 기타 기기의 경우 480V를 초과하지 않습니다. 또한 가압된 장치와 가압된 부품이 있는 장치를 다룹니다. 이러한 가전제품들은 예를 들어 식당, 구내식당, 병원, 빵집, 정육점과 같은 상업적인 사업체 등에서 상업적인 소비를 위한 식품 가공에 사용됩니다.
그러나 이 기준서는 다음을 다루지 않습니다.
■ 산업용으로만 설계된 기기
■ 부식성 또는 폭발성 대기(증기 또는 기체)가 존재하는 등 특수 조건이 만연한 장소에서 사용하도록 설계된 기기입니다.
■ 식품의 지속적인 대량 생산을 위한 장비
■ deep fat 튀김기(IEC 60335-2-37)
이 표준은 범위, 정의, 일반 요건, 시험, 분류, 표시 및 지침에 대한 일반 조건, 활선 부품에 대한 접근 방지, 전동 기기의 시동, 전력 입력 및 전류, 누출 전류 및 강도 등으로 구성됩니다.
이 문서는 2021년 9월 2일부터 시행됩니다.
Publication References:
Thai Government Official Gazette No. 138/96N, 05.05.2021, p.77
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/096/T_0077.PDF
멕시코: 안전
멀티미디어 가전용 IP를 통한 가정용 네트워크 통신 규약에 관한 표준 No. NMX-J-696-ANCE-2020 승인, 2021년 8월 선언문
시행(2021년 8월 30일 이후)
2021년 8월 30일, 멕시코 경제 사무국은 멀티미디어 가전용 IP를 통한 가정용 및 유사 가전제품 -홈 네트워크 통신 프로토콜에 관한 표준 NMX-J-696-ANCE-2020을 발행했습니다.
이 표준은isolated appliances 의 국가 홈 네트워크에 해당하는 하위 수준 홈 네트워크와 isolated appliances용 홈 네트워크를 구성하는 각 노드에 TCP/IP 프로토콜 수준을 도입하려는 경우에 대한 TCP/IP 프로토콜 수준 간의 인터페이스에 대한 요구사항을 설정합니다.
이 기준서는 2022년 2월 26일(공보에 공표된 날부터 180일)부터 시행됩니다.
Publication Regerences:
Mexican DOF 30.08.2021
http://www.dof.gob.mx/nota_detalle.php?codigo=5628022&fecha=30/08/2021
일본: 무선
무선법 시행규칙, 조례 제14호, 1950년 기타 - 개정안 - (UWB 무선시스템의 실외용 주파수 대역 확대에 관한 사항 등) 조례 제87호, 2021년입니다.
시행(2021년 8월 31일 이후)
2021년 8월 31일, 일본 총무성은 무선법 시행 규정, 무선 장비 규정 및 특정 무선 장비의 기술 표준 적합성 인증 개정안을 발표했습니다.
개정안은 UWB 무선 시스템의 실외 사용을 위한 주파수 대역을 확대하고 이에 따른 기술적 조건을 설정하기 위해 발행되었습니다.
확장된 주파수 범위는 7.25-9GHz이며 적용되는 기술 조건은 다음과 같습니다.
■안테나 전력: 평균 전력 -41.3dBm/MHz 이하, 피크 전력 0dBm/50MHz 이하입니다.
■ tolerance 점유 주파수 대역폭의 허용 오차는 1.75GHz입니다.
■ 복사 전력에 대한 주파수 대역폭은 최대 복사 전력보다 10dB 낮습니다: 450MHz 이상.
■하우징 요구사항 : 쉽게 개방되어서는 안 됩니다.
또한 60GHz 대역에서 사용되는 밀리미터파 레이더/센서 시스템의 기술적 요구 사항을 추가하여 펄스 변조형 센서 시스템을 도입했습니다. 추가된 기술 조건은 다음과 같습니다.
■ frequency 주파수 할당: 57GHz ~ 64GHz입니다.
■ 안테나 전력: 12dBm 이하입니다;
■등가 등방성 복사 전력: 17dBm 이하입니다.
■ mod 변조 유형: 펄스 진폭 변조 등입니다.
이 조례는 2021년 8월 31일부터 시행되었습니다.
Publication References:
https://public-comment.e-gov.go.jp/servlet/PcmFileDownload?seqNo=0000223983
베트남: 무선
무선 주파수 및 무선 장비의 사용을 위한 면허의 부여, 갱신, 연장 및 철회에 관한 절차 및 지침, 회람 번호 04/2021/TTTT
승인되었습니다(2021년 10월 01일부터 시행됨).
2021년 8월 13일, 베트남 정보통신부는 무선 사용 주파수에 대한 면허증 교부, 연장, 갱신, 수정, 보완 및 철회 절차를 설명하는 회람을 발행했습니다. 또한 무선 장비를 임대/임대하고 무선 주파수를 공유하기 위한 세부 정보도 포함되어 있습니다.
면허 신청서는 1세트로 제출되어야 합니다. 경매 또는 경쟁을 통한 인허가인 경우, 무선 주파수 사용권은 경매 및 선정 공모에 관한 법률을 준수하십시오.
처음으로 무선 주파수와 장비의 사용을 허가하는 라이선스는 최대 10년 동안(주파수 대역 사용에 관한 라이선스와 관련하여 15년) 부여됩니다. 무선 주파수와 무선 장비를 사용하기 위해 면허의 연장을 원하는 단체와 개인은 면허 만료 최소 30일 전에 신청 서류를 제출해야 합니다. 주파수 대역 사용을 허가하는 라이선스의 경우, 신청 파일은 만료일 최소 60일 전에 제출해야 합니다.
주파수 대역을 사용하도록 허가된 단체와 기업은 매년 12월 31일 이전에 무선 통신 네트워크에 사용되는 무선 송신기 목록 (부록 III에 명시된 양식에 따라)에 대해 정기적으로 무선 주파수 부서에 보고해야 합니다.
회람에는 신청자가 제시할 문서 유형 및 응용프로그램 파일 처리 시간 제한에 대한 추가 정보가 들어 있습니다.
본 회람의 유효일 이전에 발급된 무선 주파수를 사용하는 라이센스는 라이센스에 명시된 기간 동안 계속 유효합니다.
본 회람회는 2021년 10월 1일부터 시행될 예정입니다. 발효되면 2015년 3월 23일자 순환 번호 05/2015/TT-BTT를 폐지합니다.
Publication References:
http://congbao.chinhphu.vn/noi-dung-van-ban-so-04-2021-tt-btttt-34194?cbid=36615
칠레: 안전
과전류 보호가 없는 차동 스위치에 대한 전기 안전 시험에 관한 프로토콜 승인, 프로토콜 PE 3/06, 결의안 26573, 2018 - 수정 - (가족 형성 요건 및 적용일에 관한) 결의안 No. 8331, 2021.
시행 중입니다 (2021년 9월 03일 이후)
2021년 9월 3일, 칠레 전기연료 감독관은 과전류 보호 없는 차동 스위치에 대한 전기 안전 시험에 관한 결의안 제 26573, 2018 승인 PE 3/06호 개정안을 발표했습니다.
프로토콜 PE 3/06 제2장에 언급된 "가족 구성"은 요구사항을 보다 유연하게 만들고 다음에 따라 국제 기준에 부합하도록 개정되었습니다.
■ 가족 형성을 위해 IEC61008-1 부속서 A에 표시한 기준을 사용해야 합니다.
■ IEC61008-1 표준의 표 A3 단순화된 시험 절차는 제품군을 구성하는 모든 제품이 동일한 시험 표준의 포인트 A.3.1에 표시된 "동일한 기본 설계" 기준을 충족하는 한 사용할 수 있습니다.
또한 과전류 보호가 없는 차동 스위치와 관련하여 PE No. 3/06:2018 적용일이 수정되어 현재 2022년 2월 28일로 설정되어 있습니다.
본 결의안은 2021년 9월 3일에 발효되었습니다.
Publication References:
https://www.ingcer.cl/wp-content/uploads/2021/09/8331.pdf
[ENG Version]
Thailand: safety
Establishment of Industrial Standard TIS 60335-2(39) on Household and Similar Electrical Appliances - Safety, Part 2-39: Particular Requirements for Commercial Electric Multi-purpose Cooking Pans, Announcement No. 6164, 2021
In force (since Sep 02, 2021)
This Announcement, issued on 5 May 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 60335 Part 2(39)-2564 on Household and Similar Electrical Appliances - Safety, Part 2-39: Particular Requirements for Commercial Electric Multi-purpose Cooking Pans, in accordance with the Industrial Product Standards Act.
The Standard is based on IEC 60335–1, and deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, with a rated voltage not exceeding 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. It also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc.
The Standard however does not cover:
The Standard consists of scope, definitions, general requirements, general conditions for the tests, classification, marking and instructions, protection against access to live parts, starting of motor-operated appliances, power input and current, leakage current and electric strength, etc.
This document will enter into force on 2 September 2021.
Publication References:
Thai Government Official Gazette No. 138/96N, 05.05.2021, p.77
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/096/T_0077.PDF
Mexico: safety
Approval of Standard No. NMX-J-696-ANCE-2020 on Household and Similar Appliances-Home Network Communication Protocols over IP for Multimedia Household Appliances, Declaration, August 2021
In force (since Aug 30, 2021)
On 30 August 2021, the Mexican Secretariat of Economics published Standard NMX-J-696-ANCE-2020 on Household and Similar Appliances-Home Network Communication Protocols over IP for Multimedia Household Appliances.
This Standard establishes the requirements for the interface between the lower level home network corresponding to the country home network for isolated appliances and the TCP/IP protocol level for the cases where it is intended to introduce a TCP/IP protocol level for each of the nodes composing such home network for isolated appliances.
This Standard will enter into force on 26 February 2022 (180 days from its publication in the Official Gazette).
Publication Referencs:
Mexican DOF 30.08.2021
http://www.dof.gob.mx/nota_detalle.php?codigo=5628022&fecha=30/08/2021
Japan: wireless
Radio Act Enforcement Regulations, Ordinance No. 14, 1950 and Others - Amendment - (on expanding the frequency band for outdoor use of UWB wireless systems, etc.) Ordinance No. 87, 2021
In force (since Aug 31, 2021)
On 31 August 2021, the Japanese Ministry of Internal Affairs and Communications issued an amendment to the Radio Act Enforcement Regulations, Radio Equipment Regulations and Technical Standards Conformity Certification of Specified Radio Equipment.
The amendment was issued to expand the frequency band for outdoor use of UWB wireless systems and to establish technical conditions accordingly.
The extended frequency range is 7.25-9 GHz, and the technical conditions that would apply are as follows:
Additionally, the amendment also adds technical requirements of millimeter-wave radar/sensor system used in 60 GHz band, to introduce a pulse modulation type sensor system. The added technical conditions include:
The Ordinance entered into force on 31 August 2021
Publication References:
https://public-comment.e-gov.go.jp/servlet/PcmFileDownload?seqNo=0000223983
Vietnam: wireless
Procedures and Instructions for Granting, Renewing, Extending and Withdrawing Licences for the Use of Radio Frequencies and Radio Equipment, Circular No. 04/2021/TT-BTTTT
Approved (coming into force on Oct 01, 2021)
On 13 August 2021, the Vietnamese Ministry of Information and Communications published a circular describing the procedure for granting, extending, renewing, amending, supplementing and withdrawing licences for the use radio frequencies. It also contains details for leasing/renting radio equipment and sharing radio frequencies.
Applications for a licence shall be submitted in 1 (one) set. In the case of licensing through auction or competition, the right to use radio frequencies, comply with the law on auction and selection contest.
Licences authorising the use of radio frequencies and equipment for the first time are granted for a maximum period of ten years (15 years with respect to licences for the use of frequency bands). Organisations and individuals seeking the extension of their licences to use radio frequencies and radio equipment shall submit a dossier of application at least 30 days before the expiry of the licence. In the case of licences authorising the use of frequency bands, the application file shall be submitted at least 60 days before the expiration date.
Organisations and enterprises licensed to use frequency bands shall periodically report to the Radio Frequency Department on the list of radio transmitters used in radio communication networks (under the form specified in Appendix III) before December 31 of each year.
The Circular contains additional details on the types of document to be presented by applicants and time limits to process application files.
Licenses to use radio frequencies issued before the effective date of this Circular continue to be valid for the duration stated in the license.
This Circular is scheduled to enter into force on October 1, 2021. Once entered into force, it will repeal Circular No. 05/2015/TT-BTTTT dated March 23, 2015.
Publication References:
http://congbao.chinhphu.vn/noi-dung-van-ban-so-04-2021-tt-btttt-34194?cbid=36615
Chile: safety
Approving Protocol on Electrical Safety Testing for Differential Switches without Over-Current Protection, Protocol PE No. 3/06, Resolution No. 26573, 2018 - Amendment - (on family formation requirements and date of application) Resolution No. 8331, 2021
In force (since Sep 03, 2021)
On 3 September 2021, the Chilean Superintendence of Electricity and Fuels (SEC) published an amendment to Resolution No. 26573, 2018 Approving Protocol PE No. 3/06 on Electrical Safety Testing for Differential Switches without Over-current Protection.
The "family formation" referred to in Chapter II No. 2 of Protocol PE No. 3/06 is amended with the aim of making its requirements more flexible and aligning with international criteria in accordance with the following;
Furthermore, the date of application of PE No. 3/06:2018 in relation to differential switches without over-current protection has been modified and is now set for 28 February 2022.
This Resolution entered into force on 3 September 2021
Publication Reference:
https://www.ingcer.cl/wp-content/uploads/2021/09/8331.pdf
멕시코: 안전
전자장비 표준 No. NMX-I-62368-1-NYCE-2020 승인 - 오디오/비디오, 정보통신 기술 장비 - Part 1: 안전 요구사항, 선언, 2021년 8월
시행(2021년 8월 25일 이후)
2021년 8월 25일, 멕시코 경제 사무국은 전자 장비 - 오디오/비디오, 정보통신 기술 장비 - 1부: 안전 요구 사항에 관한 표준 NMX-I-62368-1-NYCE-2020을 발행했습니다.
이 표준은 정격전압이 480V를 초과하지 않는 오디오, 비디오, 정보통신기술, 사무실 및 업무용 기계 분야의 전자장비의 안전에 적용됩니다.
이 기준서는 장비의 성능 또는 기능적 특성에 대한 요구사항을 포함하지 않습니다. 이는 다음과 같은 단상 전압에서 작동하는 장비에 적용됩니다.
전압은 다음과 같습니다.
이 표준은 관보에 게시된 후 365일, 즉 2022년 8월 25일부터 시행되며 이전 버전의 NMX-I-62368-1-NYCE-2015를 폐지합니다.
Publication References:
Mexican Diario Oficial de la Federación, 25.08.2021
http://www.dof.gob.mx/nota_detalle.php?codigo=5627610&fecha=25/08/2021
멕시코: 안전
제어 케이블 및 저전압 전력 다중 도체에 관한 표준 No. NMX-J-486-ANCE-2020 승인, 선언, 2021년 9월
시행(2021년 9월 9일 이후)
2021년 9월 9일, 멕시코 경제국은 제어 케이블 및 저전압 전력 다중 도체에 관한 표준 NMX-J-486-ANCE-2020을 발행했습니다.
이 표준은 열가소성 수지 또는 열소성 물질로 절연 및 피복된 제어 케이블 및 저전압 전력 다중 도체에 적용되는 사양을 설정하며, 연기 방출이 적고 내화성 및 무할로겐(LS0H)에 강합니다.
최대 작동 온도 및 전압이 각각 90°C, 600V인 제어 케이블과 멀티 컨덕터에 적용됩니다.
NMX-J-486-ANCE-2020은 선언문에 명시된 이유로 국제 표준 IEC 60245-1과 동등한 것으로 간주되지 않습니다.
이 표준은 선언문이 멕시코 관보에 게재된 날부터 180일 후인 2022년 3월 8일부터 시행됩니다.
Publication Referenes:
Mexican Diario Oficial de la Federación, 09.09.2021
https://www.dof.gob.mx/nota_detalle.php?codigo=5629277&fecha=09/09/2021
멕시코: 배터리
기본전지 및 배터리에 관한 표준 No. NMX-J-160-1-ANCE-2020 승인 - Part 1: 일반 요구사항, 선언, 2021년 9월
시행(2021년 9월 8일 발행)
2021년 9월 8일, 멕시코 경제국은 1차 전지 및 배터리에 관한 표준 NMX-J-160-1-ANCE-2020의 유효성에 관한 선언을 발표했으며, 이는 이전 버전 표준 번호 NMX-J-160/ANCE-2013을 취소하는 것입니다.
이 버전의 표준은 서로 다른 제조업체의 배터리가 표준화된 형태, 장착 및 기능에 따라 상호 교환될 수 있도록 하기 위해 이해 관계자에게 혜택을 주는 것을 목표로 합니다.
치수, 명명법, 단자 구성, 표시, 테스트 방법, 일반적인 성능, 안전 및 환경 측면과 관련하여 기본 배터리를 표준화하기 위한 지침을 제공합니다.
표준은 IEC 60086-1에 따라 모델링됩니다. 단, 본 선언서의 표에 명시된 수정 사항은 제외됩니다.
이 표준은 2022년 3월 7일(멕시코 관보에 선언문이 게시된 날로부터 180일)부터 시행됩니다. 이 버전은 이 날짜 이전에 제조된 기계에는 적용되지 않습니다.
Publication References:
Mexican Diario Oficial de la Federación, 08.09.2021
https://www.dof.gob.mx/nota_detalle.php?codigo=5629152&fecha=08/09/2021
브라질: 안전 및 에너지 효율
냉장고 및 유사 기기에 대한 적합성 평가 요건 승인, 2021년 Portaria No. 332
시행(2021년 9월 1일 이후)
2021년 8월 2일, 브라질 국립 도량형 표준화 및 산업 품질 연구소(INMETRO/CONMETRO)는 냉장고 및 유사 제품에 대한 적합성 평가 요건을 승인하는 Portaria No. 332를 채택했습니다.
Portaria는 압축 시스템 및 열전기가 있는 냉장고 및 유사 제품에 적용되며, 미니바, 냉장고 및 냉동고, 냉동고 및 냉장고가 포함된 블라인드 도어, 하나 이상의 도어가 있고 수동 성에 제거(사이클 성에 제거), 자동(동결 방지) 또는 12° 전기 네트워크에 의해 반자동으로 구동되는127V 또는 220V, 60Hz제품 입니다.
다음 항목에는 적용되지 않습니다.
▪ 유리 문과 유리 뚜껑 및 블라인드 도어가 있는 상업용 냉동고 및 보관기입니다.
▪ 냉장고 및 유리문이 있는 유사 기기입니다;
▪ 냉장고 및 흡수 및 태양열 시스템을 갖춘 유사 기기입니다.
상업용 및 산업용 냉장고 및 이와 유사한 기기는 포장과 제품에 "상업용" 또는 "산업용"이라는 문구를 표시해야 합니다.
제5조에 따르면 물리적 시설이나 가상 시설에서의 냉장고 및 이와 유사한 가전제품 판매에도 다음과 같은 의무가 적용됩니다.
1. 판매 시점에 제품은 공급업체가 첨부한 다른 정보에 의해 어떠한 방해도 받지 않고 소비자가 명확히 볼 수 있어야 하는 ENCE 라벨을 부착해야 합니다.
2. 전자 상거래에서 제품이 제공되거나 표시되는 모든 페이지에 ENCE 또는 이에 포함된 정보를 제품 모델의 이미지 또는 식별 옆에 가시적이고 명확하며 명확하게 텍스트 형식으로 제공하는 것은 웹 사이트 관리자의 책임입니다.
3. 판매 카탈로그와 실제 또는 가상 광고 자료에서 ENCE 또는 텍스트 형식의 정보는 제품 모델의 이미지 또는 식별 옆에 명확하고 명확한 방식으로 제공되어야 합니다.
제6조에 따라, 무상으로 제조, 수입, 유통 및 상업화된 제품은 공급업체의 신고 메커니즘을 통해 적합성 평가를 받아야 합니다.
공급업체의 신고 후 제품은 Portaria No. 258/20에 의해 설정된 Inmetro에 등록되어야 합니다. 국가 에너지 절약 마크(ENCE) 형태의 적합성 식별 마크 사용을 승인하려면 등록이 필요합니다.
부속서 I은 에너지 효율 및 전기 안전 규칙을 포함한 기술 및 안전 요건을 규정합니다.
부속서 II는 적합성 평가 기준과 절차를 자세히 설명합니다.
항목 3.3에 따르면 제품은 포르투갈어로 된 다음 정보와 함께 제품과 포장에 영구적으로 표시되어야 합니다.
▪ 국가 제조업체 또는 수입업체의 이름, 회사명 및 세금 식별(CNPJ 또는 CPF)입니다.
▪ 제품명입니다.
▪ 제조일(일, 월, 연도, 본 순서)입니다.
▪ 배치 식별 또는 제품의 추적성을 허용하는 기타 식별입니다.
▪ 원산지입니다;
▪ 제품의 브랜드, 모델 및 버전을 식별하기 위한 상용 바코드입니다
부록 III는 ENCE 마크의 모델과 그 과도기적 사용 기간을 보여줍니다.
본 Portaria는 2021년 9월 1일부터 시행되며 2015년 Portaria No. 577을 폐지합니다.
Publication References:
Diário Oficial da Uniāo, 04.08.2021, Edition 146, Section 1, p. 137
http://www.inmetro.gov.br/legislacao/detalhe.asp?seq_classe=1&seq_ato=2813
http://www.inmetro.gov.br/legislacao/rtac/pdf/RTAC002813.pdf
브라질: 안전
2021년 Portaria No. 310 음향설비 및 유사음향에 관한 기술규정 승인합니다.
시행(2021년 8월 2일 이후)
2021년 7월 16일 브라질 국립 도량형 표준화 및 산업 품질 연구소(INMETRO/CONMETRO)는 음향 장비 등의 음향 전력에 관한 기술 규정을 승인하는 Portaria No. 310을 발행했습니다.
본 Portaria는 음력에 대한 정보가 있는 음향 장비 등에 적용됩니다.
제4조에 따르면, 국내 시장에서 구할 수 있는 스테레오 및 이와 유사한 기기의 음력은 반드시 RMS(Root Mean Square)로 표현해야 합니다. 사운드 전력 정보를 와트(피크 음악 전원 출력) 또는 다른 형식으로 제공하는 것은 금지됩니다.
이러한 제품의 공급업체는 본 Portaria의 결정을 준수해야 하며 관할 당국이 수행하는 시장 감시 조치를 따라야 합니다. 따라서 제7조에 따라 요청 시 최대 15일 이내에 필요한 정보를 제공하여야 합니다.
이Portaria는 2021년 8월 2일부터 시행되었습니다.
Publication References:
http://www.inmetro.gov.br/legislacao/detalhe.asp?seq_classe=1&seq_ato=2806
http://www.inmetro.gov.br/legislacao/rtac/pdf/RTAC002806.pdf
우루과이: 안전
저전압 전기 제품의 안전, 결의안 131/2009 - 개정안 - (가정용 및 이와 유사한 용도의 냉장 기기 규제에 관한) 결의안 153/020입니다.
시행(2021년 9월 1일 이후)
2020년 7월 16일, 우루과이 에너지 및 물 조절기(URSEA)와 우루과이 대통령은 저전압 전기 제품의 안전을 다루는 고시 131/2009를 개정하는 것을 목표로 하는 고시 153/020을 발표했습니다.
본 결의안은 가정용 및 이와 유사한 전기 냉동 기기를 결의안 No 131/00 부속문서 II 제1조에 추가합니다. 여기에는 명목 전압이 단상 가전 제품의 경우 250V, 기타 가전 제품(예: 냉동 식품 스토브가 있거나 없는 냉장고)의 경우 480V 이하인 가정용 전기 냉동 가전 제품만 포함됩니다. 냉동 보관함, 냉장고 냉동고, 냉동식품 및 냉동고를 보관하기 위한 기구, 서리가 끼지 않는지의 여부는 관계가 없습니다.
이러한 가전제품에는 모터 압축기와 냉동 식품 보관함에 통합될 제빙기뿐만 아니라 캠프, 캠프 밴 및 투어 보트에서 사용하기 위한 냉동 기기 및 제빙기는 포함되지 않습니다.
이 고시와 그 변경사항은 원래 2021년 1월 1일에 발효될 예정이었지만, URSEA 고시 236/020호는 2021년 9월 1일로 변경했습니다.
Publication References:
Diario Oficial Nº 30.480, 16.07.2020, p. 3
https://www.impo.com.uy/diariooficial/2020/07/16
인도: 통신
인도는 TEC에서 발급한 기존 형식/인터페이스 승인 인증서의 유효성을 2022년 2월 16일까지 연장합니다.
국가의 지배적인 COVID-19 전염병 상황을 고려하여, TEC(Telectricommunication Engineering Centre)는 다음 조건에 따라 형식/인터페이스 승인 인증서의 유효성을 6개월 동안(2022년 2월 16일까지) 연장하기로 결정했습니다.
"신청자(형식/인터페이스 승인 인증서 보유자)는 현행 유효기간 만료 전에 자발적 인증 신청서(제품의 TEC 표준 개정 시 갱신 사례 및 신규 신청서)를 제출해야 합니다."
here 여기에서 알림을 볼 수 있습니다.
인도: 통신
TEC는 최근 두 단계에 따라 각각의 날짜에 적용되는 새로운 제품 목록을 출시했습니다. 다음은 알림의 몇 가지 주요 내용입니다.
통지는 두 단계 III 및 IV로 나뉩니다.
3단계에서는 10개의 신제품에 대해 다루며, 모두 GCS 제도에 따라 적용되므로 이러한 모든 제품에 대해 테스트와 인증이 필수적입니다.
3단계 제품에 대한 신청 접수는 10월 11일부터 시작됩니다.
인증은 01-2022년 7월 1일부터 필수가 됩니다.
4단계에서는 36개의 새로운 제품을 다루게 되며, 거의 모든 제품이 GCS 체계에 포함되며 단 한 제품만 SCS 체계에 포함됩니다.
EMC/EMI 및 안전 요구사항의 경우 다음과 같습니다.
4단계 제품에 대한 신청 접수는 10월 11일부터 시작됩니다.
인증서는 1-2022년 2월 1일부터 의무화됩니다.
나머지 ER 매개변수의 경우 다음을 수행합니다.
4단계 제품에 대한 신청 접수는 01-Jan-2022부터 시작됩니다.
인증은 01-2022년 7월 1일부터 필수가 됩니다.
MTTE 신청서 제출 당시 2년 이상 된 시험 결과/보고서는 ILAC 서명자에 의해 인가된 시험소뿐만 아니라 지정된 TEC 모두에 관해서도 수용될 수 없습니다.
쿠웨이트: 무선
Device Type Approval인증서 유효기간
1. 하드웨어 형식 승인 인증서는 3년의 기간 동안 부여되며 당국의 재량에 따라 갱신될 수 있으며 원래의 승인 번호로 갱신 승인을 유지합니다. (형식 승인 인증서 번호)
2. 장치 유형에 대한 승인은 다음과 같은 모든 통신 장치에 유효해야 합니다. 형식승인증명서가 발급된 장비의 종류에 해당합니다.
3. 통신장비는 모든 경우에 모든 소재가 동일해야 합니다.
장치 형식 승인 인증서가 발급된 장치 유형입니다.
전기 통신 장비 인증을 갱신합니다:
1.인증서의 갱신 요구는 만료 3개월 전, 형식승인서의 만료일로부터 최대 20영업일 이내에 제출되어야 합니다.
2. 인증서는 영구히 취소되어야 하며, 언급된 기간이 만료된 후에는 갱신되지 않아야 합니다.
3. 승인된 전기 통신 장치에 대한 형식 승인 인증서는 다음 사항을 준수하여 갱신되어야 합니다.
a. 적합성 선언 및 검사 보고서 통신 기술자에 설명된 기술 표준을 변경하지 마십시오.
b. 장비는 기본 요구 사항 및 관련 기술 표준을 가진 장비 통신 장치의 적합성에 영향을 미치지 않아야 합니다. 예를 들어, 등록된 제조업체 또는 임이 있는 경우 통신 장치의 크기 및 모양을 변경하거나 장치의 모델 번호 또는 상호 변경과 같은 경우통신 장비의 짐꾼은 본인에게 통지할 의무가 있습니다.
4. 기기종류승인증의 갱신기간은 3년으로 하되, 최초승인번호(인증번호)를 유지하여야 합니다.
[ENG Version]
Mexico: safety
Approval of Standard No. NMX-I-62368-1-NYCE-2020 on Electronic Equipment - Audio/Video, Information and Communication Technology Equipment - Part 1: Safety Requirements, Declaration, August 2021
In force (since Aug 25, 2021)
On 25 August 2021, the Mexican Secretariat of Economics published Standard NMX-I-62368-1-NYCE-2020 on Electronic Equipment - Audio/Video, Information and Communication Technology Equipment - Part 1: Safety Requirements.
This standard is applicable to the safety of electronic equipment in the field of audio, video, information and communication technology, office and business machines with a rated voltage not exceeding 480 V.
The Standard does not include requirements for performance or functional characteristics of the equipment. It applies to equipment operating at single-phase voltage of:
and/or three-phase voltage of:
This Standard will enter into force 365 days from its publication in the Official Gazette, namely on 25 August 2022, and will repeal the previous version NMX-I-62368-1-NYCE-2015.
Mexico: safety
Approval of Standard No. NMX-J-486-ANCE-2020 on Control Cables and Low-Voltage Power Multi-Conductors, Declaration, September 2021
In force (since Sep 09, 2021)
On 9 September 2021, the Mexican Secretariat of Economics published Standard NMX-J-486-ANCE-2020 on Control Cables and Low-Voltage Power Multi-Conductors.
This Standard establishes the specifications applicable to control cables and low-voltage power multi-conductors, insulated and sheathed with thermoplastic or thermosetting materials, with low smoke emission, resistant to fire propagation and halogen-free (LS0H).
It applies to control cables and multi-conductors with a maximum operating temperature and voltage of 90°C and 600 V a.c. respectively.
NMX-J-486-ANCE-2020 shall not be considered as the equivalent of International Standard IEC 60245-1 for the reasons specified in the declaration.
This standard will enter into force on 8 March 2022, 180 days from the date of publication of the declaration in the Mexican Official Gazette.
Publication References:
Mexican Diario Oficial de la Federación, 09.09.2021
https://www.dof.gob.mx/nota_detalle.php?codigo=5629277&fecha=09/09/2021
Mexico: battery
Approval of Standard No. NMX-J-160-1-ANCE-2020 on Primary Cells And Batteries - Part 1: General Requirements, Declaration, September 2021
In force (published on Sep 08, 2021)
On 8 September 2021, the Mexican Secretariat of Economics published a Declaration on the validity of Standard NMX-J-160-1-ANCE-2020 on Primary Cells And Batteries - Part 1: General Requirements, which cancels its previous version Standard No. NMX-J-160/1-ANCE-2013.
This version of the standard aims to benefit stakeholders in order to ensure that batteries from different manufacturers are interchangeable according to standardised form, fit, and function.
It provides guidelines for standardising primary batteries with respect to dimensions, nomenclature, terminal configurations, marking, test methods, typical performance, safety and environmental aspects.
The Standard is modelled on IEC 60086-1, except for the modifications set out in the table of this Declaration.
This standard will enter into force on 7 March 2022 (180 days from the date of publication of the declaration in the Mexican Official Gazette). This version is not applicable to machinery manufactured before this date.
Publication References:
Mexican Diario Oficial de la Federación, 08.09.2021
https://www.dof.gob.mx/nota_detalle.php?codigo=5629152&fecha=08/09/2021
Brazil: safety and energy efficiency
Approving Conformity Assessment Requirements for Refrigerators and Similar Appliances, Portaria No. 332, 2021
In force (since Sep 01, 2021)
On 2 August 2021, the Brazil National Institute of Metrology, Standardisation and Industrial Quality (INMETRO/CONMETRO) adopted Portaria No. 332 approving the conformity assessment requirements for refrigerators and similar appliances.
The Portaria applies to refrigerators and similar appliances with a compression system and thermoelectric, with blind door, including minibars, refrigerators, refrigerators and freezers, freezers and conservators, with one or more doors, with manual defrost (cycle defrost), automatic (frost-free) or semi-automatic, powered by electric network at 127 V or 220 V, 60 Hz.
It does not apply to:
▪ commercial freezers and conservators with glass door and glass lid and blind door;
▪ refrigerators and similar appliances with glass doors;
▪ refrigerators and similar appliances with absorption and solar system.
Refrigerators and similar appliances for commercial and industrial use must be marked on the packaging and product with the words "Commercial" or "Industrial".
According to Article 5, the sale of refrigerators and similar appliances, in physical or virtual establishments, is also subject to the following obligations:
1. At the point of sale, products must bear the ENCE label which should be clearly visible to the consumer, without any obstruction by any other information attached by suppliers;
2. In e-commerce, it is the website administrator's responsibility to provide the ENCE or, alternatively, the information contained therein in text format, on all pages where the product is offered or displayed, in a visible, clear, and unequivocal manner next to the image or identification of the product model;
3. In sales catalogs and in physical or virtual advertising material, the ENCE or the information in text format must be available in a clear and unequivocal manner next to the image or identification of the product model.
As per article 6, products manufactured, imported, distributed and commercialised in the national territory, free of charge or not, must be subject to conformity assessment, through the supplier's declaration mechanism.
After the supplier's declaration, the products must be registered with Inmetro, as established by Portaria No. 258/2020. Registration is necessary for authorising the use of the Conformity Identification Mark, in the form of the National Energy Conservation Mark (ENCE).
Annex I sets out the technical and safety requirements, including energy efficiency and electrical safety rules.
Annex II details the criteria and procedures for conformity assessment.
According to item 3.3, products must be permanently marked, both on the product and on the packaging, with the following information in Portuguese:
▪ Name, company name and tax identification (CNPJ or CPF) of the national manufacturer or importer;
▪ Product trade name;
▪ Date of manufacture (day, month and year, in this order);
▪ Identification of the batch or other identification that allows the traceability of the product;
▪ Country of origin;
▪ Commercial bar code for identification of the brand, model, and versions of the product.
Annex III shows the models of the ENCE mark and their transitional use periods.
This Portaria will enter into force on 1 September 2021 and will repeal Portaria No. 577/2015.
Publication References:
Diário Oficial da Uniāo, 04.08.2021, Edition 146, Section 1, p. 137
http://www.inmetro.gov.br/legislacao/detalhe.asp?seq_classe=1&seq_ato=2813
http://www.inmetro.gov.br/legislacao/rtac/pdf/RTAC002813.pdf
Brazil: safety
Approving Technical Regulation on Sound Power of Sound Equipment and Similar, Portaria No. 310, 2021
In force (since Aug 02, 2021)
On 16 July 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 310 which approves the Technical Regulation on Sound Power of Sound Equipment and Similar.
This Portaria applies to sound equipment and similar which have information on sound power.
According to Article 4, the sound power of stereos and similar devices available on the domestic market must be expressed in watts RMS (Root Mean Square). It is prohibited to provide sound power information in watts PMPO (Peak Music Power Output) or any other form.
Suppliers of these products must comply with the determinations of this Portaria and will be subject to market surveillance actions carried out by the competent authority. Thus, as per Article 7, when requested, they shall provide the required information within a maximum period of 15 days.
This Portaria entered into force on 2 August 2021.
Publication References:
http://www.inmetro.gov.br/legislacao/detalhe.asp?seq_classe=1&seq_ato=2806
http://www.inmetro.gov.br/legislacao/rtac/pdf/RTAC002806.pdf
Uruguay: safety
Safety of Low Voltage Electrical Products, Resolution 131/2009 - Amendment - (on regulation of refrigerating appliances for household and similar use) Resolution 153/020
In force (since Sep 01, 2021)
On 16 July 2020 the Uruguayan Energy and Water Regulator (URSEA) and the Uruguayan President published Resolution 153/020 that aims to amend Resolution 131/2009 that deals with Safety of Low Voltage Electrical Products.
This Resolution adds household and similar electrical refrigeration appliances to Article 1 of Annex II of Resolution No 131/00, including only household electrical refrigeration appliances whose nominal voltage is not higher than 250V for single-phase appliances or 480V for other appliances, such as: refrigerators with or without a frozen food storage compartment, refrigerator-freezers, appliances for storing frozen food and freezers, whether frost-free or not.
These appliances do not include ice makers that incorporate a motor compressor and those intended to be incorporated into frozen food storage compartments, as well as refrigeration appliances and ice machines for use in camps, camp vans and tour boats.
This Resolution and its changes were originally going to enter into force on 1 January 2021, but URSEA Resolution No. 236/020 changed this to 1 September 2021.
Publication References:
Diario Oficial Nº 30.480, 16.07.2020, p. 3
https://www.impo.com.uy/diariooficial/2020/07/16
India: telecom
India extends the Validity of Existing Type/Interface Approval Certificates issued by TEC until 16 February 2022
In consideration of the prevailing COVID-19 pandemic situation in the country, Telecommunication Engineering Centre (TEC) has decided to extend the validity of Type/Interface Approval Certificates for a period of 6 months (until 16 February 2022) subject to the following condition:
“The Applicant (Type/Interface Approval Certificate holder) shall submit an Undertaking for submission of application for Voluntary Certification (renewal case as well as new application in case of revision of TEC Standard of a product) before expiration of current validity”.
You can view the notification here.
India: telecom
TEC has recently launched a new list of Products under two Phases which will come into effect with the respective dates. Below are some highlights of the notifications:
The Notification is divided into two Phases III and IV.
Phase III covers 10 new products, they all are covered under GCS scheme so the testing and certification is mandatory for all these products.
The Acceptance of Application for the Phase III products will start from 11-Oct-2021.
The Certification becomes Mandatory from 01-July-2022.
Phase IV will cover 36 new products, almost all of them are covered in GCS scheme only one is covered in SCS scheme.
FOR EMC/EMI and Safety Requirement:
The Acceptance of Application for the Phase IV products will start from 11-Oct-2021.
The Certification becomes Mandatory from 01-Feb-2022.
For Remaining ER Parameters:
The Acceptance of Application for the Phase IV products will start from 01-Jan-2022.
The Certification becomes Mandatory from 01-July-2022.
The test results/reports older than two years at the time of submission of the MTCTE applications shall not be acceptable in respect of both TEC designated as well as labs accredited by ILAC signatories.
Kuwait: wireless
Device Type Approval Certificate Validity
1. Hardware Type Approval Certificate is granted for a period of three years and is subject to renewal at the discretion of the Authority, and will be Keep the renewal approval with the original approval number. (type approval certificate number)
2. Approval of the type of devices shall be valid on all telecommunication devices that are. It falls under the type of equipment for which a certificate of type approval has been issued.
3. The telecommunications equipment shall in all cases be identical in all materials.
The type of devices for which the device type approval certificate has been issued.
Renewal of the certification of telecommunications equipment:
1.Requests to renew the certificate shall be submitted within a maximum of 3 months before its expiry, up to 20 working days after the expiry date of the type approval certificate.
2. The accreditation certificate shall be permanently canceled and not renewed after the expiry of the mentioned period.
3. The type approval certificate for the approved telecommunication devices shall be renewed, with compliance with the following:
a . Not to change the technical standards described in the declaration of conformity and the examination report Telecommunications technician.
b. The equipment shall not be affected by any modifications that would affect the conformity of the equipment Communication devices with basic requirements and related technical standards Such as changing the size and shape of the communication device or changing the model number or trade name of the device, where the registered manufacturer or importer of telecommunications equipment is obligated to notify body about it.
4. The renewal of the certificate of approval of the type of devices is issued for a period of three years, while keeping the number Its original approval (certificate number).
아르헨티나: 통신
아르헨티나의 정보통신부 차관은 아르헨티나에서 Ku 밴드가 사용할 수 있는 범위를 넓혔습니다.
결의안 528/2021에 따라, 그들은 다음 주파수에서 이 대역의 사용을 승인했습니다: 17.7 – 31.0 GHz.
이를 통해 위성 서비스 스펙트럼 사용을 최적화할 수 있으므로 다른 사업자가 다루지 않는 지리적 위치에서 고품질 위성 광대역 접속이 가능합니다.
현재 이 대역 내에서 작동하는 장치는ENACOM에서 승인될 수 있습니다. 로컬 테스트가 필요하지 않습니다. 형식 승인 및 외부 보고서(FCC 또는 CE)에 대한 일반적인 문서가 필요합니다.
대한민국: 안전
전기제품 및 소비자제품 안전관리법 운영 게시판, KATS 고시 2007-1268 - 개정 - (특정 EEE에 대한 검사항목 및 안전기준 변경에 관한) 고시 제 2021-284호
시행(2021년 8월 27일 이후)
대한민국 기술표준원(KATS)은 2021년 8월 27일 전기제품 및 소비자제품 안전관리법 개정안을 발표했습니다.
개정안은 오디오·영상장비와 정보통신·사무장비에 적용되는 국내 안전기준이 국제표준과 조화를 이루도록 통합됨에 따라 특정 전기제품의 점검항목과 안전기준에 대한 변화를 반영하기 위해 내려졌습니다.
구체적으로 개정안은 별표 19의 정보통신사무기기 자가점검 점검항목과 수입된 중고 전기제품 안전점검 시험항목에 대한 오디오·영상장비 및 별표 22의 정보통신사무기기 시험항목을 변경합니다.
개정안은 안전 관리 대상 전기 제품의 안전 기준 현황에 관한 부속서 25의 각 제품에 적용되는 기존의 안전 표준을 다음과 같은 새로운 표준으로 더욱 대체합니다.
■ KC 60335-2-11 가정용품 및 이와 유사한 전기제품 - 안전 - 제2-11부: 회전건조기에 대한 특별한 요구사항;
■ KC 62368-1 오디오/비디오, 정보통신기술 장비 - 제1부: 안전요건;
■ K 10001 휴대 전화 배터리 충전기입니다.
Publication References: https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=&cid=22577
사우디아라비아: 안전
SASO는 일부 제품에 대해 ICEE 인식 인증서의 새 날짜를 발급합니다.
2021년 4월 26일, 사우디아라비아 표준화, 도량형 및 품질 기구 SASO는 2021년 9월 1일부터 여러 전기 기술 제품에 대한 ICEE 국가 인정 인증서를 취득하는 것이 의무화된다고 발표했습니다. 그러나 SASO는 공식their official website (also here)에 최신 업데이트를 게시하여 날짜를 2021년 11월 1일로 변경했습니다.
이 발표에서 다루는 제품은 여전히 동일하며 다음과 같습니다.
• 전기면도기, 헤어 클리퍼 및 유사한 가전 제품 SASO-IEC-60335-2-8,
• 휴대 전화용 충전 케이블 SASO-IEC-62368-1,
• PC SASO-IEC-62368-1
• 회로 차단기 SASO-GSO-IEC-60898-(1, 2 및 3)입니다.
멕시코: 안전
가정용 및 유사 전기제품에 대한 표준 No. NMX-J-521-2-27-ANCE-2020 승인 - 안전 - Part 2-27: 광학적 방사선 피부노출 장비 관련 요구사항, 선언, 2021년 8월
시행(2021년 8월 30일 이후)
2021년 8월 30일, 멕시코 경제 사무국은 가정용 및 이와 유사한 전기 제품 - 안전 - 파트 2-27: 광학 방사선에 대한 피부 노출 장비의 특정 요구 사항에 대한 표준 NMX-J-521-2-27-ANCE-2020을 발행했습니다.
이 표준은 가정용 및 이와 유사한 용도로 피부를 광학 방사선에 노출하기 위한 방사체(파장 100 nm ~ 1 mm)를 포함하는 전기 기기에 대한 안전 요구 사항을 설정하며, 정격 전압은 단상 기기의 경우 250 V, 기타 기기의 경우 480 V를 초과하지 않습니다.
이 표준은 IEC 60335-2-27을 기반으로 하며, 수정 사항은 본 선언서의 표에 명시되어 있습니다.
이 표준은 관보에 공표된 후 180일, 즉 2022년 2월 26일부터 시행되며 이전 버전의 NMX-J-521/2-27-ANCE-2011을 폐지합니다.
Publiccation References:
Mexican Diario Oficial de la Federación, 30.08.2021
http://www.dof.gob.mx/nota_detalle.php?codigo=5628021&fecha=30/08/2021
태국: 안전
IMT2000 3GPP - 오디오, 비디오 및 유사 전자기기 산업제품 표준, 발표 제5505호, 2019년
시행(2021년 8월 29일 이후)
본 발표는 2019년 12월 27일 태국 산업부에서 제정한 산업제품 표준 TIS 1195-2536(1993)을 철회하고 학교, 극장, 예배 장소, 직장과 같은 곳에서 사용하는, 가정용 및 이와 유사한 일반 용도로 사용되는 오디오, 비디오 및 유사 전자 장치의 안전 요구 사항을 규정하는 새로운 TIS 1195-2561을 의무화합니다.
태국 공업제품 표준법에 따라 제정된 표준은 해당 제품에 대한 정의, 일반 용어, 테스트 조건, 표시, 감전 예방 요구 사항, 절연 요건 및 내화성 등을 다룹니다.
Publication References:
Thai Government Official Gazette No. 136/316D, 27.12.2019
http://www.ratchakitcha.soc.go.th/DATA/PDF/2562/E/316/T_0033.PDF
태국: 안전
선형 형광등 개조를 위한 이중 뚜껑 LED 램프의 필수 안전 요구 사항, 장관 규정, B.E. 2564, 2021
승인(2022년 3월 29일 발효)
본 장관 규정은 태국 산업부에 의해 2021년 8월 31일 공업제품 표준법의 권한에 따라 발행되었습니다.
이 규정은 일차적으로 선형 형광등을 개조하기 위해 설계된 이중 뚜껑 LED 램프가 해당 제품의 안전 요구 사항을 명시한 태국 산업 표준 TIS 2779-2562(2019)를 충족하고 2020년 8월 10일 산업부 발표 5865호에 따라 승인되어야 합니다.
이 규정은 2022년 3월 29일부터 효력이 발생합니다.
Publication References:
Thai Government Official Gazette No. 138/55A, 31.08.2021, p.20
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/A/055/T_0020.PDF
태국: 안전
형광등 홀더 및 시동 홀더를 위한 필수 안전 요구 사항, 장관 규정, B.E. 2564, 2021
승인(2022년 1월 28일 발효)
본 장관 규정은 태국 산업부에 의해 2021년 8월 31일 공업제품 표준법의 권한에 따라 발행되었습니다.
본 규정은 일차적으로 형광등 홀더와 스타터 홀더가 관형 형광등 및 스타터 홀더에 대한 램프 홀더의 안전 요구 사항을 명시하는 태국 산업 표준 TIS 344-2562(2019)를 충족해야 하며, 2020년 10월 28일자 산업부 발표 5989호에 따라 승인되어야 합니다.
표준은 2022년 1월 28일부터 의무적으로 적용될 것입니다.
Publication References:
Thai Government Official Gazette No. 138/55A, 31.08.2021, p.30
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/A/055/T_0030.PDF
태국: 안전
태국은 오디오, 비디오 및 유사한 전자 장비에 대한 안전 요구 사항에 대해 TIS 1195-2561을 취소합니다.
2021년 8월 27일, 태국 산업부는 태국 산업 표준 TIS 1195-2561(2018)을 충족시키기 위해 가정용 및 유사한 일반 사용을 위한 오디오, 비디오 및 유사 전자 장치를 요구하는 2021년 3월 2일자 장관 규정의 취소를 발표했습니다. announced
2021년 8월 28일부터 TIS 1195-2561이 취소되었습니다.
새로운 표준 TIS 62368 Book 1이 곧 출판될 예정입니다. 그동안 TIS 1195-2536은 새로운 표준이 나올 때까지 사용할 수 있습니다.
태국: 안전
표면세척기 산업표준 TIS 62885-8 제정 - 제8부: 상업용 건식청소기 - 성능측정방법, 고시 제6238호, 2021년
시행(2021년 9월 8일 이후)
2021년 9월 8일 태국 산업부에 의해 즉시 발효된 본 고시는 산업 제품법에 따라 표면 세척 기기에 관한 산업 표준 TIS 62885 파트 8-2564 - 8부: 상업용 건식 진공 청소기 - 성능 측정 방법을 제정합니다.
IEC 62885-2:2016에 기초한 이 표준은 상용용 건식청소기의 필수 성능 특성을 명시하고 있으며 이러한 특성을 측정하는 방법을 설명합니다.
또한 이 표준은 범위, 정의, 일반적인 테스트 조건, 건식 진공 테스트, 테스트 재료 및 장비 등을 제공합니다.
마지막으로 사용자는 해당 제품의 안전 요구 사항은 IEC 60335-1 및 IEC.60335-2-69를 참조할 수 있습니다.
태국: 안전
전기 모터 작동식 핸드헬드 공구, 이동 공구, 잔디 및 정원 기계에 대한 산업 표준 TIS 62841-3(14) 제정 - 안전 - 제3-14부: 이동식 배수 청소기에 대한 특별 요구사항, 2021년 발표 제6236호
시행(2021년 9월 8일 이후)
태국 산업부에 의해 2021년 9월 8일에 즉시 발효된 본 고시는 전기 모터 작동식 핸드헬드 공구, 이동 가능한 도구 및 잔디 및 정원 기계 - 안전 - 파트 3-14: 특별히 필요한 청소기에 관한 산업 표준 TIS 62841 파트 3(14)-2564를 제정합니다.「공업제품표준법」을 준수하여야 합니다.
이 표준은 IEC 62841-1의 요구 조건을 따르며 파이프 클리너라고도 하는 운반 가능한 배수 청소기에 적용됩니다. 그러나 이 기준서에서는 다음을 다루지 않습니다.
● 휴대용 배수구 클리너
● 고압 배출 클리너
● 배수로를 청소하기 위해 고체 막대를 사용하는 기계
이 표준은 또한 시험 범위, 정의, 시험, 방사선, 독성 및 이와 유사한 위험, 분류, 표시, 열/연소/녹에 대한 내성, 내구성, 오작동, 기계적 위험 및 강도 등을 제공합니다.
Publication References:
Thai Government Official Gazette No. 138/211N, 08.09.2021, p.69
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/211/T_0069.PDF
태국: 안전
산업표준 TIS 902-2(20) 제정, 발표번호 6186, 2021
시행(2021년 9월 8일 이후)
태국 산업부에 의해 2021년 9월 8일에 즉시 발효된 본 고시는 산업 제품 표준법에 따라 조명 체인에 관한 산업 표준 TIS 902 Part 2(20)-2564를 제정합니다.
이 표준은 250V를 초과하지 않는 공급 전압에서 실내 또는 실외에서 사용하기 위해 직렬, 병렬 또는 직렬/병렬 연결 광원의 조합이 장착된 조명 체인에 대한 요구사항을 지정합니다.
고정식 또는 탈부착식 부착물로 제공되는 조명 체인 및 푸시인 유형의 램프 홀더가 장착된 조명 체인도 이 표준에 포함됩니다. 표준화되지 않은 램프(예를 들어 푸시인 유형의 램프)가 있는 조명 체인의 경우, 램프는 조명 체인의 일부로 간주되어 결과적으로 시험에 포함됩니다.
이 표준은 또한 범위, 정의, 테스트, 방사선, 독성 및 유사한 위험, 분류, 표시, 열/연소/녹에 대한 내성, 내구성, 오작동, 기계적 위험 및 강도 등을 위한 일반 조건을 제공합니다.
Publication References:
Thai Government Official Gazette No. 138/211N, 08.09.21, p.19
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/211/T_0019.PDF
[ENG Version]
Argentina: telecom
The Subsecretary of Information Technologies & Communications of Argentina expanded the spectrum for Ku Band use in Argentina.
By resolution 528/2021, they authorized the use of this band on the following frequencies from now on: 17.7 – 31.0 GHz.
This allows an optimization of the use of the spectrum of satellite services, enabling high quality satellite broadband access in those geographical locations that are not covered by other providers.
Effective now, devices operating within this band could be approved on ENACOM. No local testing is required. Only usual documentation for type approvals and foreign reports (FCC or CE).
South Korea: safety
Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act, KATS Notice 2007-1268 - Amendment - (on changes of inspection items and safety standards for certain EEE) Notice No. 2021-284
In force (since Aug 27, 2021)
On 27 August 2021, the South Korean Agency for Technology and Standards (KATS) issued an amendment to the Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act.
The amendment was issued to reflect the changes on inspection items and safety standards of certain electric appliances, as domestic safety standards applied to audio/video equipment and information, communication, and office equipment have been integrated to harmonise with international standards.
Specifically, the amendment changes inspection items for self-inspection of information, communication and office equipment in Annex 19, as well as test items of audio/video equipment and information, communication and office equipment in Annex 22 on test items for safety inspection of imported used electrical appliances.
The amendment further replaces the existing safety standards applied to each product with the following new standards, in Annex 25 on the status of safety standards for electrical appliances subject to safety control:
The Notice entered into force on 27 August 2021.
Publication References:
https://www.kats.go.kr/content.do?cmsid=239&mode=view&page=&cid=22577
KSA: safety
SASO issues a new date for the IECEE Recognition Certificate for some products
On 26 April 2021, the Saudi Organization for Standardization, Metrology and Quality SASO had announced that obtaining the IECEE national recognition certificate for a number of electrotechnical products is becoming mandatory starting from 1 September 2021. However, SASO published a recent update on their official website (also here) changing the date to 1 November 2021 instead.
The products covered by this announcement are still the same, and they are:
Thailand: safety
Industrial Product Standard for Audio, Video and Similar Electronic Apparatus, Announcement No. 5505, 2019
In force (since Aug 29, 2021)
This Announcement madly the Thai Ministry of Industry on 27 December 2019, withdraws industrial product standard TIS 1195-2536 (1993) and makes mandatory the new TIS 1195-2561 laying down safety requirements of audio, video and similar electronic apparatus intended for household and similar general use but which may also be used in places of public assembly such as schools, theatres, places of worship and the workplace.
The standard formulated in accordance with the Thai Industrial Product Standards Act, covers definitions, general terms, testing conditions, marking, requirements for electric shock prevention, insulation requirements and fire resistance, etc for the said products.
Publication References:
Thai Government Official Gazette No. 136/316D, 27.12.2019
http://www.ratchakitcha.soc.go.th/DATA/PDF/2562/E/316/T_0033.PDF
Thailand: safety
Mandatory Safety Requirements for Double-Capped LED Lamps Designed to Retrofit Linear Fluorescent Lamps, Ministerial Regulation, B.E. 2564, 2021
Approved (coming into force on Mar 29, 2022)
This Ministerial Regulation was published by the Thai Ministry of Industry on 31 August 2021, under the authority of the Industrial Product Standards Act.
The Regulation primarily requires that double-capped LED lamps designed to retrofit linear fluorescent lamps meet the Thai Industrial Standard TIS 2779-2562 (2019) specifying the safety requirements of said products, and are approved in accordance with the Announcement No. 5865 of the Ministry of Industry of 10 August 2020.
The Regulation becomes effective on 29 March 2022.
Publication References
Thai Government Official Gazette No. 138/55A, 31.08.2021, p.20
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/A/055/T_0020.PDF
Thailand: safety
Mandatory Safety Requirements for Fluorescent Lampholders and Starterholders, Ministerial Regulation, B.E. 2564, 2021
Approved (coming into force on Jan 28, 2022)
This Ministerial Regulation was published by the Thai Ministry of Industry on 31 August 2021, under the authority of the Industrial Product Standards Act.
The Regulation primarily requires that fluorescent lampholders and starterholders meet Thai Industrial Standard TIS 344-2562 (2019) specifying the safety requirements of lampholders for tubular fluorescent lamps and starterholders, and which are approved in accordance with the Announcement No. 5989 of the Ministry of Industry dated 28 October 2020.
The standard will be of mandatory application with effect from 28 January 2022.
Publication References
Thai Government Official Gazette No. 138/55A, 31.08.2021, p.30
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/A/055/T_0030.PDF
Thailand: safety
Thailand cancels TIS 1195-2561 on Safety Requirements for Audio, Video and Similar Electronic Apparatus
On 27 August 2021, the Thai Ministry of Industry announced the cancellation of the Ministerial Regulation, dated 2 March 2021, which required audio, video and similar electronic apparatus intended for household and similar general use to meet Thai Industrial Standard TIS 1195-2561 (2018).
TIS 1195-2561 has been cancelled with effect from 28 August 2021.
The new standard TIS 62368 Book 1 is scheduled to be published soon. In the meantime, TIS 1195-2536 can be used until the new standard is released.
Thailand: safety
Establishment of Industrial Standard TIS 62885-8 on Surface Cleaning Appliances - Part 8: Dry Vacuum Cleaners for Commercial Use - Methods for Measuring the Performance, Announcement No. 6238, 2021
In force (since Sep 08, 2021)
This Announcement issued with immediate effect on 8 September 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 62885 Part 8-2564 on Surface Cleaning Appliances - Part 8: Dry Vacuum Cleaners for Commercial Use - Methods for Measuring the Performance, in accordance with the Industrial Product Standards Act.
The Standard, based on IEC 62885-2:2016, specify essential performance characteristics of dry vacuum cleaners for commercial use which are of interest to users and describes methods for measuring these characteristics.
The Standard also provides scope, definitions, general conditions for testing, dry vacuum tests, and test materials and equipment, etc.
Lastly, users may refer to IEC 60335-1 and IEC.60335-2-69 for safety requirements of said products.
Publication References
Thai Government Official Gazette No. 138/211N, 08.09.2021, p.71
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/211/T_0071.PDF
Thailand: safety
Establishment of Industrial Standard TIS 62841-3(14) on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-14: Particular Requirements for Transportable Drain Cleaners, Announcement No. 6236, 2021
In force (since Sep 08, 2021)
This Announcement issued with immediate effect on 8 September 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 62841 Part 3(14)-2564 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-14: Particular Requirements for Transportable Drain Cleaners, in accordance with the Industrial Product Standards Act.
The Standard is in accordance with the requirements of IEC 62841-1 and applies to transportable drain cleaners, also referred to as pipe cleaners. The Standards, however, does not cover:
The Standard also provides scope, definitions, general conditions for testing, radiation, toxicity and similar hazards, classification, marking, resistance to heat/combustion/rust, durability, malfunction, mechanical hazards and strength, etc.
Publication References
Thai Government Official Gazette No. 138/211N, 08.09.2021, p.69
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/211/T_0069.PDF
Thailand: safety
Establishment of Industrial Standard TIS 902-2(20) on Lighting Chains, Announcement No. 6186, 2021
In force (since Sep 08, 2021)
This Announcement issued with immediate effect on 8 September 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 902 Part 2(20)-2564 on Lighting Chains, in accordance with the Industrial Product Standards Act.
The Standards specifies requirements for lighting chains fitted with series, parallel or a combination of series/parallel connected light sources for use either indoors or outdoors on supply voltages not exceeding 250 V.
Lighting chains provided with fixed or detachable attachments and lighting chains fitted with lampholders of the push-in type are also covered this Standard. For lighting chains with non-standardised lamps (e.g. lamps of the push-in type), the lamps are regarded as a part of the lighting chain and consequently included in the testing.
The Standards also provides scope, definitions, general test requirements, classification of luminaries, marking, construction, creepage distances and clearances, provisions for earthing, terminals, external and internal wiring, protection against electric shock, endurance tests and thermal tests, resistance to dust, solid objects and moisture, insulation resistance and electric strength, and resistance to heat, fire and tracking, etc.
Publication References
Thai Government Official Gazette No. 138/211N, 08.09.21, p.19
http://www.ratchakitcha.soc.go.th/DATA/PDF/2564/E/211/T_0019.PDF
사우디아라비아: 무선
CITC RI117 라이선스 운용 데이터 통신 장비 사양 제외 주파수 대역, 발행 번호 01, 2021년 7월호입니다.
시행중 (2021년 7월 20일 이후)
사우디 통신 및 정보기술 위원회(CITC)가 2021년 7월에 발행한 이 사양은 Wi-Fi, ZigBee 및 블루투스를 포함하여 라이센스 면제 주파수 대역으로 작동하는 데이터 통신 장비에 적용됩니다.
해당되는 경우 모든 장비는 무선 근거리 통신망 규정을 준수해야 합니다. 본 문서에 명시된 주파수를 사용하는 드론은 무선 인터페이스와 관련하여 이 기술 사양을 준수해야 합니다. 드론 등록 및 통관 관련 문제는 관련 기관과 조율해야 합니다.
본 사양에 명시되지 않은 대역으로 운영되는 드론의 경우, 사용 전에 CITC로부터 주파수 라이선스를 받아야 합니다.
이 새 사양은 2021년 7월 20일부터 시행되었으며 다음을 대체합니다.
■ 단거리 광대역 데이터 전송 시스템 및 보조 장비의 사양 RI045
■ 블루투스 장비 사양 RI103
■ 직비 장비 사양 RI104
■ 드론 장비 사양 RI115
사우디아라비아: 무선
무선 오디오, 무선 마이크, 인이어 모니터링 및 보조 장비, 사양 RI044, 3호, 2021년 7월호입니다.
시행 중 (2021년 7월 20일 이후)
2021년 7월, 사우디 통신 및 정보기술 위원회(CITC)는 무선 오디오, 라디오 마이크, 인이어 모니터링 및 보조 장비에 적용되는 이 사양을 발표했습니다.
사양에는 최대 출력 또는 자기장 및 관련 표준을 포함하여 각 주파수 대역에 대한 제한 및 사용 조건 표가 포함되어 있습니다.
주파수 면허 요건은 전문 장비에만 적용되며 청각 장애인을 대상으로 한 애플리케이션을 제외하고 실내에서만 사용이 제한됩니다.
이 버전은 RI044 "라디오 마이크/이어 모니터링 및 보조 장비 사양"과 RI053 "무선 오디오 애플리케이션 장비 사양"을 하나의 기술 사양으로 통합했습니다.
발효일은 2021년 7월 20일입니다.
사우디아라비아: 무선
SRD(단거리 장치)용 CITC RI054 사양, 4호, 2021년 7월호입니다.
이 사양은 단거리 장치(SRD) 및 보조 장비에 적용됩니다.
단거리 장치는 저전력으로 작동하며 단거리 통신 기술을 제공하는 장치로 정의됩니다. 이 기술 사양에서 다루는 SRD 애플리케이션에는 의료기기, 유도성, RFID, 동물 추적, 동물 이식 가능 장치 및 탱크 레벨 프로빙 레이더(TLPR)가 포함됩니다.
여기에는 주파수 대역, 최대 출력 전력, 사용량(제품) 및 해당 표준 및 기타 주석에 대한 정보가 나와 있습니다.
이 사양은 다음 사양 RI048, RI050, RI054, RI055, RI080, RI083 및 RI084를 하나의 문서로 병합합니다.
사우디아라비아: 무선
CITC RI085 울트라 광대역 장비 사양, 2호, 2021년 7월호입니다.
시행중 (2021년 7월 20일 이후)
원본 텍스트에서 추출했습니다.
"범위
이 사양은 초광대역 장비에 적용됩니다. UWB 기술은 통신 측정, 위치 추적, 이미징, 감시 및 의료 시스템을 위한 다양한 새로운 단거리 장치(SRD)의 잠재력을 보유하고 있습니다.
시행
이 규격은 20/07/2021년부터 시행되어야 합니다.
이 기술 사양의 이전 버전은 철회됩니다.
일반 요구사항
• 모든 장비는 CITC 사양 GEN001의 요구 사항을 준수해야 하며, 안전해야 하며, 다른 전기 장비에 악영향을 미쳐서는 안 됩니다.
• 모든 통신 및 무선 터미널 장비는 CITC가 정한 관련 기술 사양을 준수해야 합니다. 또한 이러한 장비는 규정 준수 선언 또는 등록의 적용을 받을 수 있습니다. 자세한 내용은 www.citc.gov.sa을 방문하십시오.
• 한 장비에서 둘 이상의 인터페이스 유형을 제공하는 경우, 각 인터페이스는 해당 기술 사양을 충족해야 합니다.
• 시험 보고서는 반드시 ILAC 상호 인정 협정의 회원국에 의해 인가된 실험실에서 입수해야 합니다."
일본: 안전
2013년 문서 No. 3 - 개정 - (별첨 12 적용 기준) 문서 No. 4. 2021
2021년 8월 2일, 일본 경제통상산업성은 전기기기 및 재료의 기술적 요건에 관한 조례의 개정안을 발표했습니다.
이 문서는 최신 국제 기술 동향을 반영하기 위해 전기 제품 및 재료에 대한 기술 요건에 따라 적용되는 표준을 다음과 같이 변경합니다.
② JIS 22 표준을 IEC 표준 최신 버전으로 교체하기 위해 공기청정기, 전기난방 매트, 난방용 액체 기구, 상업용 냉동기기, 가습기, 주방기기 등 JIS 4표준을 채택하였습니다.
■ 기한이 지난 16개 기준을 삭제합니다.
변경사항은 2021년 8월 2일에 발효되었습니다. 2021년 8월 2일에 폐지된 J60320-1(2019) 및 J74001(2019)을 제외하고 이미 사용 중인 JIS 표준을 새로운 버전으로 교체하는 데는 3년의 과도 기간이 적용됩니다.
대한민국: 안전
안전 확인 대상 생활용품 안전기준, 고시 No. 2009-978 - 개정 - (화장품 안전기준 추가) 고시 No. 2021-226
승인되었습니다(2022년 3월 22일부터 시행됩니다).
대한민국 기술표준원은 2021년 8월 3일, 안전 확인 대상 생활용품에 대한 안전기준 고시 개정안을 승인했습니다.
개정안은 가전제품안전관리법에 따라 안전확인대상 생활용품에 화장품 기기를 추가하기 위해 발행되었습니다.
특히, 개정안은 가정용 화장품 기기에 대한 새로운 안전 표준을 부속서 74에 추가했습니다. 적용 가능한 제품은 다음과 같습니다.
■ LED 마스크 타입의 기기
■ 두피 관리 기기
■ 눈 마사지기
■ 플라즈마 피부 관리 장치
의료기기법에 따라 의료기기로 허가 또는 인증된 제품은 범위를 벗어납니다.
새로운 안전 표준은 해당 제품에 적용되는 외부 온도 및 광생물학적 안전성, 테스트 방법 및 표시를 포함한 안전 요구 사항을 제공합니다.
제품 및 제품 포장에는 한국어로 다음 정보가 포함되어야 합니다.
■ 모델 이름
■ 제조 월/연도
■ 제조사 이름
■수입업자의 이름
■주소 및 전화 번호
■ 제조 국가
■ 안전 표시 또는 등급 등
제조업체 또는 수입업체도 각 제품 범주에 대해 부록에 명시된 사용 설명서를 제공해야 합니다.
본 고시는 2022년 3월 22일부터 시행됩니다.
적도 기니: 무선입니다.
적도 기니 ORTEL이 인증서 유효 기간을 2년으로 업데이트합니다.
KSA: 안전
SASO는 일부 제품에 대한 IECEE 인증서를 발표했습니다.
2021년 4월 26일, 사우디 표준화, 도량형 및 품질 SASO는 2021년 9월 1일부터 다수의 전기 제품에 대한 IECEE 국가 인증 취득이 의무화된다고 발표했습니다. 그러나 SASO는 대신 날짜를 2021년 11월 1일로 변경하는 최신 업데이트를 공식 official website에 게시했습니다.
이 발표에서 다루는 제품은 여전히 동일하며 다음과 같습니다.
■ 전기 면도기, 이발기 및 유사 기기 SASO-IEC-60335-2-8,
■ 휴대폰용 충전 케이블 SASO-IEC-62368-1
■ PC SASO-IEC-62368-1
■ 회로 차단기는 SASO-GSO-IEC-60898-(1, 2, 3)
멕시코:통신
무선 주파수를 사용하거나 통신망에 연결된 이동통신 단말기 사양, 표준 IFT-011-2017 Part 2, 협정, 2018년 1월 개정 - (VoLTE 음성통화에 관한), 협정, 2021년 2월입니다.
시행 중입니다 (2021년 8월 11일 이후)
2021년 2월 12일 멕시코 IFT는 표준 IFT-011-2017을 개정하여 기능이 제공되는 곳에서 자동 음성 교환(VoLTE) 통화가 차단되거나 제한되지 않도록 하기 위한 계약을 발표했습니다.
본 계약의 주요 목적은 VoLTE 기능을 통해 음성 통화를 자동으로 설정하는 모바일 터미널 장비가 사용자에 대해 이 기능을 활성화 및 활성화하여 어떤 유형의 네트워크도 그것의 작동을 차단하거나 제한하는 일이 없도록 하는 것입니다. 대리점 또는 적절한 경우 공인 모바일 서비스 및 해당 대리점에 적용되는 테스트 방법을 제공합니다.
또한, 본 수정안의 발효 전에 발급된 적합성 및 승인 인증서는 여기에 명시된 기간까지 유효하며, 모니터링 대상이 될 수 없으며, 유사한 장비에 대해 연장 또는 사용될 수 없습니다.
본 개정안의 발효부터 ETN이 모바일 서비스를 위한 작동 주파수 대역에서 VoLTE 기능을 통해 음성 통화를 자동 설정할 수 있는 모든 구성 요소를 가지고 있지 않은 경우, ETN은 표면적이고 명확하며 가시적인 표시 또는 라벨을 통해 음성 통화를 표시해야 합니다. 용기, 포장, 라벨, 포장지, 여행용 시트, 레지스터 또는 전자 표시(제품 소프트웨어)를 읽을 수 있는 방법으로 사용할 수 있습니다.
제시된 개정안은 2021년 8월 11일부터 시행됩니다.
브라질: 무선/통신
Anatel 마크 준수 선언에 의한 제품 호몰로게이션 절차입니다. No. 5205, 2021
시행 중입니다 (2021년 7월 29일 이후)
2021년 7월 29일, 브라질 국가통신국(ANATEL)은 적합성 선언에 의한 제품 호몰로게이션에 대한 운영 절차를 승인하기 위해 2021년 법률 5205호를 발행했습니다.
이 법은Anatel 적합성 선언의 신청 및 승인 과정을 설명합니다. Anatel 브랜드 적합성 선언에 의해Anatel에 제출된 제품은 반드시Anatel의 컴퓨터 시스템에 등록되어야 합니다. 등록은 본 절차에서 정한 기준에 따라 신청자가 직접 수행해야 합니다. 신청자가Anatel의 전산 시스템에 정보 등록을 완료하면 승인이 자동으로 이루어집니다.
항목 9.1은 신청자가Anatel마크를 사용하여 모든 해당 요건을 준수할 책임을 진다고 명시합니다.
제3자의 착오를 유발할 수 있는 표시, 표지 또는 비문의 사용은 금지됩니다. 그러나Anatel 표시의 가시성, 가독성 및 명확한 인식을 해치지 않는 한 다른 표시는 제품에 부착할 수 있습니다.
본 법률은2021년 7월 29일 년부터 시행되었습니다.
브라질: 무선/통신
통신제품에 대한 호몰로게이션 식별 표시를 위한 운영 절차 승인, 법률 No. 4088/2020 - 개정 - (기한 연장 및 제품에 관한) 법률 No. 5701, 2021
시행 중입니다 (2021년 7월 29일 이후)
2021년 7월 29일, 브라질 국립전기통신국(ANATEL)은 통신 제품의 호몰로게이션 식별 표시를 위한 운영 절차에 관한 법률 4088을 개정하기 위해 법률 5701, 2021을 발행했습니다.
이 법은 2022년 7월 31일부터 의무화될 제품 표시의 준수 기한을 늦추기 위하여 법 제4088호 제2조를 개정합니다.
또한, 법률 제5701호 제2조에는 법률 제4088호 부속서 5.2.1항 IV항목이 포함되어 있으며, ANATEL의 호몰로게이션과Anvisa's의 법률로 적용되는 의료용 제품을 추가합니다.
본 법률은 2021년 7월 29일 부터 시행되었습니다.
말레이시아: 통신
이는 SIRIM QAS International이 MCMC MTSFB TC T014:2017 및 MCMC MTSFB TC02019에 따라 디지털 지상파 TV용 액티브 실내 안테나(DTT) 및 인터넷 프로토콜 버전 6(IPV6)에 대한 인증을 구현했음을 알리기 위한 것입니다.
따라서 위 제품의 국내 수입은 준수 승인 또는 특별 승인을 받아야 합니다.
위의 요구 사항에 따라 eComM의 IT/네트워킹 모듈이 새 모듈로 업데이트되어 IT/네트워킹 애플리케이션이 새 요구 사항을 충족하는지 확인하십시오.
2021년 8월 1일부터 IT/네트워킹 신청은 다음과 같이 진행됩니다.
Application Criteria |
New Requirement |
2021년 8월 1일 이전에 IT/네트워킹 애플리케이션을 제출합니다(기존 IT/네트워킹 모듈 사용하는 경우). |
a) 승인된 신청서는 2021년 7월 31일까지 유효 기간으로 발급됩니다. |
b) 승인 인증서(CoA) 신청은 2021년 7월 31일까지 허용됩니다. |
|
IT/네트워킹 애플리케이션이 2021년 8월 1일부터 제출되었습니다(새로운 IT/네트워킹 모듈 사용하는 경우). |
a) 승인된 신청서는 유효기간이 1년으로 발행됩니다. |
b) 유효기간 내에 승인인증서(CoA) 신청이 허용됩니다. |
대한민국: 안전
안전 확인 대상 생활용품 안전기준, 고시 제2009-978호 - 개정 - (별첨 72 전광판) 고시 제2020-268호입니다.
시행 중입니다 (2021년 8월 01일 이후)
기술표준원은 2020년 10월 8일 전기 스케이트보드, 킥보드 등 전광판의 배터리 안전요건을 변경하기 위한 안전확인 대상 생활용품 안전기준 고시 개정안을 입법예고하였습니다.
개정안에서는 제품 본체 또는 사용 설명서에 사진과 텍스트를 포함하여 전기 보드의 배터리를 교체할 때 폭발 위험과 관련된 주의사항을 표시하도록 요구하고 있습니다.
개정안은 또한 기존 안전 표준에서 배터리의 단락 시험, 과충전 시험, 충돌 시험, 진동 시험 및 충격 시험을 삭제하고 대신 휴대용 기기의 밀봉 리튬 2차전지의 KC 62133-2에 따라 이러한 시험들을 별도로 관리하도록 요구하고 있습니다.
이 고시는 2021년 8월 1일부터 시행되며, 변경 사항은 이 날짜 이후 선적 또는 통관된 제품에 영향을 미칩니다.
[English Version]
Saudi Arabia: wireless
CITC RI117 Specification for Data Communication Equipment Operating in License-Exempt Frequency Bands, Issue No. 01, July 2021
In force (since Jul 20, 2021)
This Specification issued in July 2021 by the Saudi Communications and Information Technology Commission (CITC) applies to data communication equipment operating in license-exempt frequency bands, including but not limited to, Wi-Fi, ZigBee and Bluetooth.
All equipment must comply with the Wireless Local Area Networks Regulation if applicable. Drones utilizing frequencies specified in this document must comply with this technical specification with regard to the radio interface. Issues related to drones registration, and customs clearance must be coordinated with the related entities.
For drones operating in bands not specified in this specification, a frequency license must be obtained from CITC before use.
This new Specification entered into force on 20 July 2021 and replaces the following:
Specification RI115 for Drones Equipment
Saudi Arabia: wireless
Wireless Audio, Radio Microphones, In-Ear Monitoring and Ancillary Equipment, Specification RI044, Issue 3, July 2021
In force (since Jul 20, 2021)
In July 2021, the Saudi Communications and Information Technology Commission (CITC) issued this Specification that applies to wireless audio, radio microphones, in-ear monitoring and ancillary Equipment.
The Specification contains a table of limits and conditions of usage for each frequency band, including the maximum power output or magnetic field and the related standards.
Spectrum licensing requirements apply to professional equipment only, and usage is restricted to indoor only except for applications intended to hearing impaired people.
This version has merged RI044 “Specification for Radio Microphones/In-Ear Monitoring and Ancillary Equipment” with RI053 “Specification for Wireless Audio Applications Equipment” into one technical specification.
The date of entry into force is 20 July 2021.
Saudi Arabia: wireless
CITC RI054 Specification for Short Range Devices (SRD), Issue 4, July 2021
This specification applies to short-range devices (SRD) and ancillary equipment.
Short range devices are defined as those operating at low power and offering a communication technology for short distances. SRD applications covered in this technical specification include, but not limited to, medical devices, inductive, RFID, animal tracking, animal implantable devices and tank level probing radars (TLPR).
It contains a table showing information on frequency bands, maximum output power, usage (products) and applicable Standards and any extra comments.
This Issue of the specification merges the following specifications RI048, RI050, RI054, RI055, RI080, RI083, and RI084 into one document.
Saudi Arabia: wireless
CITC RI085 Specification for Ultra Wideband Equipment, Issue 2, July 2021
In force (since Jul 20, 2021)
Extracted from the text of the Source:
"Scope
This specification applies to ultra wideband equipment. UWB technology holds potential for a wide variety of new Short Range Devices (SRD) for communications measurement, location tracking, imaging, surveillance and medical systems.
Enforcement
This specification shall enter into force on 20/07/2021.
Any previous version of this technical specification is withdrawn.
General Requirements
• All equipment must comply with the requirement of CITC specification GEN001, be safe and must not adversely affect other electrical equipment.
• All telecommunications and radio terminal equipment must comply with the relevant technical specifications established by CITC. In addition, such equipment may be subject to regulations Declaration of Conformity or registration. Please visit www.citc.gov.sa for details.
• If more than one interface type is offered by a piece of equipment, each interface must meet the applicable technical specifications.
• It is mandatory that test reports are obtained from a laboratory that has been accredited by a body that is a member of the ILAC Mutual Recognition Arrangement."
Japan: safety
Interpretation of Ordinance on Technical Requirements for Electrical Appliances and Materials, Document No. 3, 2013 - Amendment - (on Annex 12 applicable standards) Document No. 4, 2021
On 2 August 2021, the Japanese Ministry of Economy, Trade and Industry (METI) issued an amendment to the Interpretation of the Ordinance on Technical Requirements for Electrical Appliances and Materials.
The document brings the following changes to the standards applicable under technical requirements for electrical appliances and materials in order to reflect the latest international technology trends:
The changes became effective on 2 August 2021. The transitional period of 3 years will apply for replacing JIS standards already in use with a newer version, except for J60320-1 (2019) and J74001 (2019) which were repealed on 2 August 2021.
South Korea: safety
Safety Standards for Household Items Subject to Safety Confirmation, Notice No. 2009-978 - Amendment - (on addition of new safety standards for cosmetic devices) Notice No. 2021-226
Approved (coming into force on Mar 22, 2022)
On 3 August 2021, the South Korean Agency for Technology and Standards (KATS) approved an amendment to the Notice on Safety Standards for Household Items Subject to Safety Confirmation.
The amendment was issued to add cosmetic devices to the household items subject to safety confirmation in accordance with the Electrical Appliances and Consumer Products Safety Control Act.
Specifically, the amendment adds new safety standards for household cosmetic devices to Annex 74. Applicable products include:
Products licensed or certified as medical devices in accordance with the Medical Device Act are out of scope.
The new safety standards provide safety requirements including exterior temperature and photobiological safety, test methods and markings applied to the said products.
Products and their packaging must bear the following information in Korean:
Manufacturers or importers are also required to provide user manuals as stipulated in the Annex for each product category.
This Notice will enter into force on 22 March 2022.
Equatorial Guinea: wireless
Equatorial Guinea ORTEL Updates Certificate Validity to 2 years.
KSA: safety
SASO issues a new date for the IECEE Recognition Certificate for some products
On 26 April 2021, the Saudi Organization for Standardization, Metrology and Quality SASO had announced that obtaining the IECEE national recognition certificate for a number of electrotechnical products is becoming mandatory starting from 1 September 2021. However, SASO published a recent update on their official website changing the date to 1 November 2021 instead.
The products covered by this announcement are still the same, and they are:
Mexico:telecom
Specifications on Mobile Terminal Equipment Using Radio Spectrum or Connected to Telecommunications Networks, Standard IFT-011-2017 Part 2, Agreement, January 2018 - Amendment - (on VoLTE voice calls), Agreement, February 2021
In force (since Aug 11, 2021)
On 12 February 2021 the Mexican IFT published an agreement in order to amend the Standard IFT-011-2017 to ensure that automatic voice-over-LTE (VoLTE) calling is not blocked or restricted where the functionality is available.
The main objective of the agreement is to ensure that Mobile Terminal Equipment that has been manufactured with the capability automatically establish voice calls, through the VoLTE functionality, will have this functionality enabled and active for the user, so that there is no type of blocking or restriction of its operation in the network of any dealer or, where appropriate, authorized mobile service and also the test methods applied to them.
Further, the certificates of conformity and approval issued prior to the entry into force of these amendment shall remain valid until the term indicated therein, and shall not be subject to monitoring, nor may they be extended or used for similar equipment.
From the entry into force of these amendments, in those cases in which the ETNs do not have all the components that allow the automatic establishment of voice calls through the VoLTE functionality in any of the operating frequency bands intended for mobile service, they must indicate it through a marking or label in an ostensible, clear, visible and legible way in its container, packaging, label, wrapper, travelling sheet, register or electronic marking (product software).
The amendments laid down will enter into force on 11 August 2021.
Brazil: wireless / telecom
Procedure for Product Homologation by Declaration of Conformity with Anatel Mark, Act. No 5205, 2021
In force (since Jul 29, 2021)
On 29 July 2021, the Brazil National Telecommunications Agency (ANATEL) published Act No. 5205, 2021 to approve the Operational Procedure for Product Homologation by Declaration of Conformity.
The Act describes the application and approval process for the Anatel Conformity Declaration. Products submitted to Anatel, by Declaration of Conformity with the Anatel Brand, must be registered in Anatel's computer system before being sold in the national territory. The registration must be carried out directly by the Applicant, according to the criteria established in this Procedure. The approval will be automatic after the applicant completes the registration of information in Anatel's computerized system.
Item 9.1 states that the Applicant, by using the Anatel mark, assumes responsibility for conformity to all applicable requirements.
It is prohibited to use markings, signs, or inscriptions that may induce third parties into error. However, it is permitted to fix on the product any other marking, as long as it does not harm the visibility, legibility, and unequivocal perception of the Anatel marking.
This Act entered into force on 29.07.2021.
Brazil: wireless / telecom
Approving Operational Procedure for Marking the Homologation Identification on Telecommunications Products, Act No. 4088/2020 - Amendment - (on deadline extension and products) Act No. 5701, 2021
In force (since Jul 29, 2021)
On 29 July 2021, Brazil National Telecommunications Agency (ANATEL) published Act No. 5701, 2021 to amend Act No. 4088 on the operational procedure for marking the homologation identification on telecommunications products.
This Act amends Article 2 of Act No. 4088 in order to delay the compliance deadline for product marking, which will become mandatory on 31 July 2022.
In addition, article 2 of Act No. 5701 includes item IV in item 5.2.1 of the Annex of Act No. 4088 to add products intended for medical applications, subject to homologation by Anatel, and covered by Anvisa's legislation.
This Act entered into force on 29.07.2021.
Malaysia: telecom
This is to inform that SIRIM QAS international has implemented the certification for Active Indoor Antenna for Digital Terrestrial Television (DTT) and Internet Protocol Version 6 (IPv6) in according to MCMC MTSFB TC T014:2017 and MCMC MTSFB TC T013:2019 respectively.
Therefore, the importation of the above products into the country shall subject to compliance approval or special approval.
With the above requirements, please be informed that the IT/Networking Module in eComM has been updated with a new module as to ensure application for IT/Networking are fulfils with the new requirements.
Effective 1st August 2021 , Application for IT/Networking shall be processed as follows :
Application Criteria |
New Requirement |
IT/ Networking application submitted before 1st Aug 2021 (Use Old IT/Networking Module) |
a) Approved application will be issued with a validity period until 31st July 2021. |
b) Certificate of Approval (CoA) application is allowed until 31st July 2021, however application submitted after 31st July 2021 will be rejected by the system. |
|
IT/ Networking application submitted from 1st August 2021 and onwards (Use New IT/Networking Module) |
from the date of File Number is generated. |
however application submitted after end of validity period will be rejected by the system |
South Korea: safety
Safety Standards for Household Items Subject to Safety Confirmation, Notice No. 2009-978 - Amendment - (on Annex 72 electric boards) Notice No. 2020-268
In force (since Aug 01, 2021)
On 8 October 2020, the Korean Agency for Technology and Standards (KATS) issued an amendment to the Notice on Safety Standards for Household Items Subject to Safety Confirmation, to change safety requirements for batteries for electric boards such as electric skateboards and kick boards, etc.
The amendment requires that precautions regarding explosive risks be indicated on the main body of the product or in the user manual with pictures and text, to apply when replacing batteries of the electric board.
The amendment further deletes short circuit test, overcharge test, crash test, vibration test, and impact test for batteries in the existing safety standards, and instead requires these to be managed separately, in accordance with KC 62133-2 on sealed lithium secondary batteries for portable devices.
The Notice will enter into force on 1 August 2021, and the changes would affect products shipped or cleared from this date.
브라질: 안전 및 에너지 효율
fan및 공기 순환기에 대한 적합성 평가 및 라벨 표시 기술 요구 사항 승인, Portaria No. 299, 2021
승인(2021년 8월 2일부터 시행)되었습니다.
INMETRO는 팬과 공기 순환기의 적합성 평가 및 라벨 부착을 위한 기술 안전 및 에너지 효율 요구 사항을 업데이트하고 재발행했습니다. 이 요건은 벽걸이형 및 테이블 받침대 전기 팬과 공기 순환기 또는 국내용으로 판매되는 유사한 기기에 적용됩니다.
fan과 공기 순환기는 부속문서 1의 기술 요건에 따라 적합성이 인증된 경우에만 수입 및/또는 국내 시장에 출시될 수 있습니다. 인증 후 제품은 부속서 II에 명시된 준수 식별 마크 사용 승인을 받기 위해 INMETRO에 등록되어야 합니다. 제품에는 부속서 I에 명시된 지침 매뉴얼이 함께 제공되어야 합니다. 적합성 식별 표시가 기기에 부착되어야 하며 판매 시점에 국가 에너지 보존 라벨(ENCE)이 분명하게 표시되어야 합니다.
이Portaria는 2021년 8월 2일에 시행되었습니다.
Public Rerefences
Official Journal, No. 130, Section 1, 13.07.2021, p. 38
http://www.inmetro.gov.br/legislacao/rtac/pdf/RTAC002799.pdf
https://pesquisa.in.gov.br/imprensa/jsp/visualiza/index.jsp?data=13/07/2021&jor...
중국: 배터리
GB 24427-2021 아연 양극 기본 배터리의 수은, 카드뮴 및 납 함량 제한, 2021년
승인(2021년 11월 1일부터 시행)되었습니다.
2021년 4월 30일, 중국표준화국(SAC)과 중국시장규제국(SAMR)은 아연 양극 1차 배터리의 수은, 카드뮴 및 납 함량 제한에 대한 국가 표준을 승인했습니다.
이 표준은 표준화된 이산화 아연 망간 배터리, 산화 아연 배터리 및 아연 공기 배터리의 수은, 카드뮴 및 납 함량 한계를 명시합니다. 이 표준은 위에서 언급한 여러 개의 단일 배터리로 구성된 배터리 및 배터리의 생산, 검사 및 수용에 적용됩니다.
아연 양극 1차 배터리의 수은, 카드뮴 및 납 함량에 대한 제한 요구사항(μg/g)은 표 1에 나와 있습니다.
표시는 GB/T 8897.1-2020 섹션 4.1.6에 따라 적용되어야 합니다. 수은 함량 표시와 관련하여 버튼 배터리의 수은 함량이 5μg/g(0.005mg/g) 이하일 때, 다른 배터리의 수은 함량 1μg/g(0.001mg/g) 이하일 때 "수은 없음"으로 표시할 수 있습니다.
이 표준은 GB 24428-2009 및 GB 24427-2009를 폐기하며, 2021년 11월 1일부터 시행됩니다.
Publication References
http://std.samr.gov.cn/gb/search/gbDetailed?id=C205D645F69EB676E05397BE0A0A73F7
말레이시아: 무선
작년 발표 내용입니다.(자세한 내용은 아래 참조)
WiFi 인터페이스가 없는 IPv6 셀룰러 장비에 대한 임시 형식 승인 시행이 2021년 7월 10일부터 추후 통지가 있을 때까지 1년 더 연장됨을 알려드립니다. 따라서 모든 신규 신청 및 적합성 증명서(CoC) 갱신은 최대 1년의 유효 기간으로 허용됩니다.
이 기간 동안 이 요구 사항에 대해 테스트할 수 있는 실험실이 있는 경우 테스트를 진행하십시오. 그러면 전체 5년의 유효 기간이 부여됩니다.
페루: 안전
개정된 청소 기기, 에어컨 및 열 펌프, 전기 설비용 스위치, Resolution No. 017-2021-INACAL/DN에 대한 기술 표준을 승인합니다.
시행 중입니다(2021년 7월 27일 이후).
2021년 7월 26일, Resolution 017-2021-INACAL/DN을 통해 페루 기술 표준 기구 INACAL은 진공 청소기 및 방수 청소 기기, 다중 분할 시스템 에어컨 및 공기 대 공기 열 펌프, 전기 설비용 스위치 등에 대한 개정된 기술 표준 목록을 승인했습니다.
결의안에는 현재 폐지된 이러한 표준의 이전 버전도 나열되어 있습니다.
이 Resolution은 페루 법에 따라 2021년 7월 27일 발표된 다음날 발효되었습니다.
Publication References
El Peruano, 26.07.2021, pp. 29-30
https://busquedas.elperuano.pe/download/url/aprueban-normas-tecnicas-peruanas-s...
페루: 안전
개정된 기술표준, 가정용 전기제품 및 기타 표준, 결의안 014-2021-INACAL/DN을 승인합니다.
시행 중입니다(2021년 7월 10일 이후)
2021년 7월 09일, 결의안 014-2021-INACAL/DN을 통해 페루 기술 표준 기구 INACAL은 조명, 가정용 전기 제품, 구부러지는 적층 용기 및 기타 사항에 대한 개정된 기술 표준 목록을 승인했습니다.
Resolution에는 현재 폐지된 표준의 이전 버전도 나열됩니다.
이 결의안은 페루 법에 따라 2021년 7월 10일 발표된 다음날 발효되었습니다.
Publication References
El Peruano, 09.07.2021, pp. 39-40
https://busquedas.elperuano.pe/download/url/aprueban-normas-tecnicas-peruanas-r...
Samoa: 무선
2021/T02 형식 승인 장비에 대한 라벨 요구 사항입니다.
시행 중입니다(2021년 6월 23일 이후).
원본 텍스트에서 추출되었습니다.
"본 주문서는 통신 장비를 시장에 판매 및 공급하려는 제조업체 및 수입업체와 관련이 있습니다. 규제 당국은 통신 장비 승인 상징으로 산업부와 노동부에 상표를 등록했습니다.
이 상표는 형식 승인 인증서가 승인된 형식 승인 식별 코드와 함께 부여된 경우에만 제조업체 및 수입업체가 사용합니다. 상표는 포장, 보증 양식, 사용 설명서 및 전단, 웹 사이트 및 장비 또는 장치에 강조 표시됩니다. 제품에 디스플레이가 내장되어 있고 높이가 3mm여야 하는 경우 전자 라벨 부착을 권장합니다."
Publication References
https://www.regulator.gov.ws/images/ORDERS/Telecom/2021/ORDER2021-T02.pdf
뉴질랜드: 무선/통신
무선 스펙트럼 사용량 표, 목록, (PIB 21), 이슈 11, 2021년 6월입니다.
2021년 6월에 출판되었습니다.
"섹션 2의 표는 뉴질랜드 내에서 다양한 무선 서비스에 의한 주파수 범위(즉, "밴드")의 중요하지만 반드시 독점적이지는 않은 기존 사용을 나타냅니다. 이는 특히 항공, 해상, 위성, 항법, 우주 연구, 천문학 및 아마추어 서비스와 같이 국제적인 협조가 중요한 경우 국제 라디오 규정 5조 섹션 IV "주파수 할당 표"에 기초합니다. 그러나 뉴질랜드의 스펙트럼이 개인 소유의 경영권 대상인 경우, 권리 소유자가 스펙트럼의 최고 가치 사용을 결정한다는 점에 유의해야 합니다.
본 문서는 무선 사용 및 할당에 일반적으로 관심이 있는 사람부터 전문 무선 엔지니어까지 모든 수준의 전문 지식을 갖춘 사람이 사용할 수 있도록 작성되었습니다. 이 문서는 뉴질랜드의 무선 스펙트럼 사용과 관련된 정책, 권고사항 및 의사 결정을 개발하기 위한 자원 문서로 사용될 것으로 예상됩니다. 무선 스펙트럼 할당에 대한 NZ 표에 대한 보다 상세한 개요는 RSM 웹사이트에서 이용할 수 있는 "뉴질랜드에서의 무선 스펙트럼 할당" 차트에 나와 있습니다.
[English Version]
Brazil: safety and energy efficiency
Approving Technical Requirements of Conformity Assessment and Labelling for Fans and Air Circulators, Portaria No. 299, 2021
Approved (coming into force on Aug 02, 2021)
INMETRO has updated and reissued the technical safety and energy efficiency requirements for conformity assessment and labelling of fans and air circulators. The requirements apply to wall-mounted and table pedestal electrical fans and air circulators or similar appliances marketed for domestic use.
Fans and air circulators may only be imported and, or placed on the national market if their conformity has been certified in accordance with the technical requirements of Annex 1. After certification, the products shall be registered with INMETRO in order to receive approval to use the Compliance Identification Mark set out in Annex II. The products shall be supplied with instruction manuals written as specified in Annex I. The Conformity Identification Mark shall be affixed to the appliance and the National Energy Conservation Label (ENCE) shall be displayed in a clearly visible manner at the point of sale.
This Portaria came into force on August 2, 2021.
Public Rerefences
Official Journal, No. 130, Section 1, 13.07.2021, p. 38
http://www.inmetro.gov.br/legislacao/rtac/pdf/RTAC002799.pdf
https://pesquisa.in.gov.br/imprensa/jsp/visualiza/index.jsp?data=13/07/2021&jor...
China: battery
GB 24427-2021 Content Limitation of Mercury, Cadmium, and Lead for Zinc Anode Primary Battery, 2021
Approved (coming into force on Nov 01, 2021)
On 30 April 2021, the China Standardization Administration (SAC) and the China State Administration for Market Regulation (SAMR) approved a national standard on content Limitation of mercury, cadmium, and lead for zinc anode primary batteries.
This standard specifies the limits of mercury, cadmium, and lead content in standardized zinc manganese dioxide batteries, zinc silver oxide batteries, and zinc-air batteries. This standard is applicable to the production, inspection, and acceptance of the above-mentioned batteries and batteries composed of several single batteries.
The limit requirements (μg/g) for mercury, cadmium, and lead content in zinc anode primary batteries are shown in Table 1.
Marking should be applied in accordance with Section 4.1.6 of GB/T 8897.1-2020. With regard to the marking of mercury content, when the mercury content of button batteries is not more than 5 μg/g (0.005mg/g), and when the mercury content of other batteries is not more than 1 μg/g (0.001mg/g), it can be marked as "No mercury".
This standard repeals GB 24428-2009 and GB 24427-2009.
It enters into force on 1 November 2021.
Publication References
http://std.samr.gov.cn/gb/search/gbDetailed?id=C205D645F69EB676E05397BE0A0A73F7
Malaysia: wireless
This is the update from last year announcement. ( refer below for more details )
Please be informed that the implementation of the interim Type Approval for IPv6 cellular equipment without WiFi interface is extended for another year, effective from 10th July 2021, until further notice. As such, all new applications and renewal of Certificate of Conformity (CoC) are allowed with a maximum validity of one (1) year.
If there are any labs can be test for this requirements during this, please proceed for testing and full 5 years of Validity will be granted.
Peru: safety
Approving Revised Technical Standards on Cleaning Appliances, Air Conditioners and Heat Pumps, Switches for Electrical Installations and Others, Resolution No. 017-2021-INACAL/DN
In force (since Jul 27, 2021)
On 26 July 2021, the Peruvian technical standards body INACAL through Resolution No. 017-2021-INACAL/DN approved a list of revised technical standards on vacuum cleaners and water-suction cleaning appliances, multiple split-system air conditioners and air-to-air heat pumps, switches for electrical installations and others.
The Resolution also lists the previous versions of these standards that are now repealed.
The Resolution entered into force the day following publication, 27 July 2021, according to the rule of Peruvian law.
Publication References
El Peruano, 26.07.2021, pp. 29-30
https://busquedas.elperuano.pe/download/url/aprueban-normas-tecnicas-peruanas-s...
Peru: safety
Approving Revised Technical Standards on Luminaires, Household Electrical Appliances and Others, Resolution No. 014-2021-INACAL/DN
In force (since Jul 10, 2021)
On 09 July 2021, the Peruvian technical standards body INACAL through Resolution No. 014-2021-INACAL/DN approved a list of revised technical standards on luminaries, household electrical appliances, flexible laminated containers and other matters.
The Resolution also lists the previous versions of standards now repealed.
The Resolution entered into force the day following publication, 10 July 2021, according to the rule of Peruvian law.
Publication References
El Peruano, 09.07.2021, pp. 39-40
https://busquedas.elperuano.pe/download/url/aprueban-normas-tecnicas-peruanas-r...
Samoa: wireless
Labelling Requirements For Type Approval Equipment, Order No. 2021/T02
In force (since Jun 23, 2021)
Extracted from the text of the Source:
"This Order concerns Manufacturers and Importers intending to sell and supply telecommunications equipment to the market. The Office of the Regulator has registered with the Ministry of Commerce Industry and Labour a trademark as a symbol of approval of telecommunications equipment.
This trademark will only be used by the manufacturer and importer once the Type Approval Certificate is granted with the approved Type Approval Identification Code. The trademark will be highlighted on packaging, warranty forms, instruction manual and leaflets, websites and equipment or devices. The electronic labelling is recommended if the product has a built-in display and must be 3mm height."
Publication References
https://www.regulator.gov.ws/images/ORDERS/Telecom/2021/ORDER2021-T02.pdf
New Zealand: wireless/telecom
Table of Radio Spectrum Usage, List, (PIB 21), Issue 11, June 2021
Published on Jun 2021
"The table in section 2 indicates significant, but not necessarily exclusive, existing usage within New Zealand of a range of frequencies (i.e. "bands") by various radio services. It is based on the International Radio Regulations Article 5, section IV, "Table of Frequency Allocations" - particularly where international co-ordination is important such as in the aeronautical, maritime, satellite, navigation, space research, astronomy and amateur services. It should be noted, however, that where spectrum in New Zealand is the subject of privately owned Management Rights, the right holder determines the highest value use of the spectrum.
This document is intended for use by persons of all levels of expertise from persons with a general interest in radio usage and allocation through to the professional radio engineer. It is expected to be used as a resource document for developing policies, recommendations and decisions pertaining to radio spectrum usage in New Zealand. A less detailed overview of the NZ table of radio spectrum allocations is given in the chart “Radio Spectrum Allocations in New Zealand”, available at the RSM website."
브라질: 안전
상용 전기 오븐에 대한 안전, 에너지 라벨 부착 및 적합성 평가 요건 승인, Portaria No. 267, 2021
시행 중입니다(2021년 7월 1일 이후).
2021년 6월 25일, 브라질 국립 도량형, 표준화 및 산업 품질 연구소(INMETRO/CONMETRO)는 상용 전기 오븐의 품질 기술 규정 및 적합성 평가 요건을 승인하기 위해 Portaria No 267을 발행했습니다.
본 Portaria는 상업용 전기 오븐에 대한 통합된 규정을 승인하고 부속서 I, II 및 III를 통해 적합성 식별 마크에 대한 품질, 적합성 평가 및 사양에 대한 기술 규정을 제정합니다.
이는 전력이 20kW 미만인 폐쇄된 결합, 송풍 대류 및 밸러스트 전기 오븐에 적용되며, 단상 전원 공급 전압은 250V, 송풍 공기 대류를 사용하거나 사용하지 않는 3상 전원 공급 전압은 480V입니다.
가스로 연소되는 오븐은 작동에 기여하는 전기 부품이 있는 경우 안전 테스트를 받아야 합니다.
송풍 대류, 4kW 미만의 전력, 2400평방센티미터 미만의 수평 면적 및 생산 용량이 사이클당 25love 미만인 오븐은 물론, IEC 60335-2-6 및 IEC 60335-2-9 표준의 적용범위에 속하는 모든 오븐 및 가정용 오븐은 에너지 소비 요구 사항 Portaria No.371/2009에서 제외됩니다.
제6조에 따르면, 실제 또는 가상 장소에서 판매할 때, 제품은 가시적인 방식으로 ENCE를 포함해야 하며, 가상 상거래의 경우, 사이트 관리자는 제품이 제공되거나 전시되는 모든 페이지의 텍스트 형식으로 ENC 또는 이에 포함된 정보를 표면적이고 모호하지 않은 방식으로 제품 모델의 이미지 또는 식별 정보를 제공해야 합니다. 카탈로그에도 마찬가지입니다.
부속서 I는 기술 품질 규정을 다루고 상업용 전기 오븐에 대한 필수 요구 사항을 규정합니다. 기술 표준 ABNT NBR NM 60335-1:2010, IEC 60335-2-36:2017, IEC 60335-2-42:2009 및 IEC 60335-2-102:2012의 준수는 기술 전기 안전 요구사항의 적합성을 가정합니다.
또한 성능 요구사항, 전기 안전 요구사항, 표시 및 지침 요구사항 등을 제공합니다.
표시와 관련하여, 제품에 적절한 정보가 제공되어야 하며, 사용자에게 안전 위험이 없는 기기 사용에 필수적인 사용, 유지보수 및 설치 지침이 적절한 장소에 위치해야 합니다.
오븐에는 다음을 표시해야 합니다.
■ 오븐의 종류
● 공칭 전압 또는 공칭 전압 범위(볼트)
■ 정격 주파수가 표시되지 않는 한 소스의 특성 기호
● 공칭 전력(와트) 또는 정격 전류(암페어)
■ 책임 제조업체 또는 공급업체의 이름, 상표 또는 식별 표시
■ 모델 또는 유형 참조
● 기호 5172는 참조 표준에 나와 있습니다(클래스 II 기기에만 해당).
■ IPX0과 다를 경우 수분 침투에 대한 보호 정도에 따른 IP 번호
부록 II는 시장 전 요구 사항을 언급하고 상업용 전기 오븐의 적합성 평가 요구 사항을 강조합니다. 전기에너지 사용 및 절약을 위해 인증을 통해 안전성과 성능에 초점을 맞춘 기준 및 적합성 평가 절차를 수립합니다.
또한 적합성 평가 메커니즘의 전체 절차와 단계를 자세히 설명하고 상업용 전기 오븐의 인증은 동일한 제조 단위에서 동일한 목적으로 생산되는 일련의 모델로 구성된 제품군에 의해 수행되어야 한다고 결정합니다. 기능 및 구성 특성에 따라 그룹화할 수 있습니다.
마지막으로, 부록 III는 적합성 식별 마크와 국가 에너지 절약 라벨(ENCE)을 보여줍니다.
이Portaria는 2021년 7월 1일부터 시행됩니다.
일본: 무선
전파법 시행규칙, 조례 제14호, 1950년 기타 - 개정안 - (IoT용 전력선 통신에 관한) 조례 제65호, 2021
시행(2021년 6월 30일부터)
2021년 6월 30일 일본 총무성은 전파법 시행규칙 및 전파설비규칙 개정안을 발표했습니다.
이번 개정안은 전력선통신의 첨단시스템 도입과 전력선통신의 서비스 공간을 시장 수요에 맞게 확대하는 것을 목표로 하고 있습니다. 전력선 통신은 무선 통신이 어려운 공장에서 센서 정보 수집 등 IoT 인프라를 구축하는 효과적인 수단 중 하나가 될 것으로 기대됩니다.
개정안의 주요 변경 사항은 다음과 같습니다.
전력선 통신 전압의 상한선이 200V에서 600V로 변경됩니다.
강선의 경우 전력선 통신에서 전력선에 직류가 가능하도록 합니다.
조례는 2021년 6월 30일에 발효되었습니다.
케냐: 안전
제품 등록에 대한 공지, 2021년 7월
KEBS(Kenya Bureau of Standards)는 표준법, CAP 496, 케냐 법률에 따라 설립된 법정 기관입니다. KEBS는 케냐 표준 또는 승인된 사양에 근거한 수입품 품질 검사 서비스를 다른 서비스 중에서 제공해야 합니다.
2020년 12월 18일 법률고시 212호 공고에 따라, KEBS가 인정한 인증에 근거하여 저위험 수입제품 등록을 시작하였음을 모든 수입업체와 일반대중에게 알리고자 합니다. 등록된 모든 제품은 KEBS가 지정한 검사 기관에 의해 수출국에서 검사를 받은 경우 적용되는 비율에 따라 수입업체의 비용으로 목적지 검사를 받게 됩니다. 제품 등록 신청서는 KEBS 웹사이트 www.kebs.org에서 다운로드할 수 있습니다.
KEBS는 제품 등록 요건 및 지침과 2020년 법률 공지 212가 KEBS 웹 사이트에서 참조할 수 있음을 추가로 공지하고자 합니다. 자세한 내용은 KEBS로 전화 +254 20 6948415 / 456 / 439 / 000, 이메일: [email protected]으로 문의하십시오.
이스라엘: 안전
가정용 및 유사 전기제품에 대한 국가 의무 표준 승인, 공지 제 5721호, 2021년
시행 중입니다(2021년 7월 10일 이후).
이스라엘 경제 산업부 장관이 2021년 4월 11일에 발표한 이 고시는 국가 의무 표준으로 간주해야 할 17가지 표준 목록을 제공합니다.
이러한 표준은 다음과 같은 참고문헌에 따라 2021년 4월 15일에 세계무역기구(WTO)에 통보되었습니다.
SI 900 파트 2.11 - 가정용 및 유사 전기 제품 - 안전: 텀블 드라이어의 특정 요구 사항(G/TBT/N/ISR/1083/추가.1)
SI 900 파트 2.60 - 가정용 및 유사 전기 기기 - 안전: 월풀 욕조 및 월풀 스파에 대한 특정 요구사항(G/TBT/N/ISR/1078/추가.1)
SI 900 파트 2.52 - 가정용 및 유사 전기 기기 - 안전: 구강 위생 기기에 대한 특정 요구 사항(G/TBT/N/ISR/1077/추가.1)
SI 900 파트 2.12 - 가정용 및 유사 전기 기기 - 안전: 온열판 및 유사 기기에 대한 특정 요구 사항(G/TBT/N/ISR/1076/추가.1)
SI 900 파트 2.97 - 가정용 및 유사 전기 제품 - 안전: 셔터, 차양막, 블라인드 및 유사 장비용 드라이브에 대한 특정 요구 사항(G/TBT/N/ISR/1059/추가.1)
SI 900 파트 2.91 - 가정용 및 이와 유사한 전기 기기 - 안전: 뒷면 및 휴대용 잔디깎기 및 잔디깎기(G/TBT/N/ISR/1058/추가.1)에 대한 특정 요구사항
SI 900 파트 2.77 - 가정용 및 이와 유사한 전기 기기 - 안전: 보행자 제어 주사용 잔디깎기(G/TBT/N/ISR/1057/추가.1)에 대한 특정 요구 사항
SI 900 파트 2.55 - 가정용 및 이와 유사한 전기 제품 - 안전: 수족관 및 정원 연못에 사용하기 위한 전기 제품의 특정 요구사항(G/TBT/N/ISR/1055/추가.1)
SI 900 파트 2.29 - 가정용 및 이와 유사한 전기 제품 - 안전: 배터리 충전기의 특정 요구 사항(G/TBT/N/ISR/1053/추가.1)
SI 900 파트 2.66 - 가정용 및 이와 유사한 전기 기기 - 안전: 온수기 전용 요구사항(G/TBT/N/ISR/1089/추가.1)
SI 900 파트 2.16 - 가정용 및 이와 유사한 전기 기기 - 안전: 음식물 쓰레기 처리기에 대한 특정 요구 사항(G/TBT/N/ISR/1085/추가.1)
SI 900 파트 2.13 - 가정용 및 유사 전기 제품 - 안전: 딥 지방 프라이어, 프라이팬 및 유사 제품에 대한 특정 요구사항(G/TBT/N/ISR/1084/추가.1)
SI 900 파트 2.95 - 가정용 및 이와 유사한 전기 기기 - 안전: 주거용 수직 이동 차고 문에 대한 특정 요구 사항(G/TBT/N/ISR/1082/추가.1)
SI 900 파트 2.85 - 가정용 및 이와 유사한 전기 제품 - 안전: 직물 찜기에 대한 특정 요구사항(G/TBT/N/ISR/1081/추가.1)
SI 900 파트 2.82 - 가정용 및 이와 유사한 전기 제품 - 안전: 놀이 기계 및 개인 서비스 기계에 대한 특정 요구 사항(G/TBT/N/ISR/1080/추가.1)
SI 900 파트 2.81 - 가정용 및 이와 유사한 전기 제품 - 안전: 발난방 및 난방 매트에 대한 특정 요구사항(G/TBT/N/ISR/1079/추가.1)
SI 900 파트 2.59 - 가정용 및 유사 전기 제품 - 안전: 곤충 살충제에 대한 특정 요구 사항(G/TBT/N/ISR/1088/추가.1)
위의 표준은 이스라엘 관보에 발표된 지 90일 후인 2021년 7월 10일부터 시행될 예정입니다.
Official Gazette No. 9314, 11.04.2021, p. 2918
이스라엘: 통신
Communications Order 5772-2012에 따른 LTE 및 IMT 2020 장비에 대한 라이센스 면제, 공지사항, 2021년 6월
시행 중입니다(2022년 1월 1일 이후).
2021년 6월 27일, 이스라엘 통신부는 통지서에 나열된 최소 LTE, IMT2020 기술 중 하나와 주파수 범위 중 하나에서 작동하도록 설계된 RTN 단말 장비가 통신 (베제크 및 방송) 명령서, 5772-2012의 섹션 2에 명시된 조건을 충족한다고 발표했습니다.
이 고시는 2022년 1월 1일부터 시행됩니다.
KSA: 안전
SASO는 여러 제품에 대해 IECEE Recognition인증서가 필수 사항이 되는 날짜를 변경합니다.
2021년 3월 10일, 사우디 표준화, 도량형 및 품질 SASO는 2021년 7월 1일부터 다수의 전기 기술 제품에 대한 IECEE 국가 인정 인증서를 취득하는 것이 의무화된다고 발표했습니다. 그러나 SASO는 날짜를 2021년 9월 1일로 변경한 최신 업데이트를 공식 웹사이트에 게시했습니다.
이번 발표에서 다루는 제품은 여전히 동일하며, 다음과 같습니다.
● 물보일러 및 주전자 SASO-IEC-60335-2-15
■ 모든 종류의 SASO-IEC-60335-2-15 및 SASO-IEC-60335-2-14 커피 메이커
● 가정용 전기 튀김기 SASO-IEC-60335-2-13
● 5hp 이하의 IEC 60335-2-41 전기 펌프
■ 비디오 게임 콘솔 및 컨트롤러 SASO-IEC-62368-1
● 전원 케이블 - IEC-60227-(1-7), IEC-60245-(1-8), IEC-60502-(1-2), IEC-60702-1, IEC-60800, IEC-62821-(1-3) 및 IEC-62930
■ 무선 헤드셋
● 충전기 및 기타 액세서리
브라질: 안전및에너지효율
에어컨 적합성 평가 및 에너지 라벨 표시를 위한 기술 요건 승인, Portaria No. 269, 2021
시행 중입니다(2021년 7월 1일 이후).
2021년 6월 26일, 브라질 국립 도량형, 표준화 및 산업 품질 연구소(INMETRO/CONMETRO)는 에어컨 적합성 평가 요건을 승인하기 위해Portaria 269호를 발행했습니다.
본 Portaria는 에어컨에 대한 통합 규정을 승인하고 부속서 I 및 II를 통해 적합성 식별 마크에 대한 적합성 평가 및 사양에 대한 기술 규정을 제정합니다.
이 기능은 최대 17.58kW(60,000BTU/h)의 냉각 용량을 가진 모노 블록, 싱글 바디 윈도우 또는 벽걸이형 및 분할 시스템형 에어컨에 적용됩니다.
다음 제품은 본 Portaria의 적용범위에서 제외됩니다.
● 휴대용, 덕트 및 다중 섀시형 에어컨입니다.
■ 육상, 철도, 해상 및 항공 차량을 위한 에어컨입니다.
● 에어컨에 태양광으로 구동되는 콘덴서 장치를 장착합니다.
제5조에 따르면, 실제 또는 온라인에서 판매할 때, 제품은 가시적인 방식으로 ENCE를 포함해야 하며, 가상 상거래의 경우 사이트 관리자는 제품이 제공되거나 전시되는 모든 페이지의 텍스트 형식으로 ENCE 또는 이에 포함된 정보를 표면적이고 모호하지 않은 방식으로 제품 모델의 이미지 또는 식별 정보를 제공해야 합니다.영업 카탈로그에도 마찬가지입니다.
부속서 I는 에어컨에 대한 사전 시장 및 적합성 평가 요구 사항을 다룹니다. 국내에서 제조, 수입, 유통 및 판매되는 에어컨은 공급업체 신고 메커니즘을 통해 적합성 평가를 받아야 합니다. 에어컨 인증은 동일한 제조 유닛에서 생산되는 모델 집합으로 구성되며 동일한 기능을 위해 구성되고 구성 특성에 따라 분류될 수 있는 그룹별로 수행해야 합니다.
에어컨은 IEC 60335-1 및 IEC 60335-2-40에 명시된 모든 안전 테스트를 받아야 합니다.
마지막으로, 부록 II는 적합성 식별 마크와 국가 에너지 절약 라벨(ENCE)을 보여줍니다.
이 Portaria 는 2021년 7월 1일에 시행되었습니다.
한국: 안전
전기제품 및 소비자제품 안전관리법 운영게시판, KATS 고시 2007-1268 - 개정 - (얼음 분쇄기 관련 세부 품목/모델 분류 변경에 관한 사항)고시 제 2021-177호
시행 중 (2021년 7월 05일 이후).
2021년 7월 5일, 한국기술표준원(KATS)은 전기제품 및 소비자제품 안전관리법 운영게시판에 개정안을 발표하였습니다.
개정안은 전기제품 및 소비자제품 안전관리법 시행규칙(2021년 규정 420호)의 개정 내용을 반영하기 위해 발표되었습니다.
특히, 이 고시는 부속문서 5(안전성 확인 대상 생활용품 세부 항목) 및 13(안전성 확인 대상 생활용품 모델 분류에 대한 세부 기준)에서 수동식 기계식 얼음 분쇄기를 제거하고 공급자적합성 확인대상의 수입 대상 생활용품에 대해 부속문서 6과 14에 해당 제품을 추가합니다.
이 고시는 2021년 7월 5일부터 시행되지만 얼음 분쇄기에 관한 부속서 5, 6, 13 및 14는 2021년 11월 28일부터 시행됩니다.
[영어 원문]
Brazil: safety
Approving Safety, Energy Labelling and Conformity Assessment Requirements for Commercial Electric Ovens, Portaria No. 267, 2021
In force (since Jul 01, 2021)
On 25 June 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No 267 to approve the quality technical regulation and the conformity assessment requirements for commercial electric ovens.
This Portaria approves the consolidated regulation for commercial electric ovens and establishes the technical regulation on quality, conformity assessment and specifications for the conformity identification mark through Annexes I, II, and III.
It applies to combined, forced convection and ballast electric ovens, closed, with nominal power below 20kW, power supply voltage up to 250V for single-phase and 480V for three-phase, with or without forced air convection.
Gas-fired ovens which have electrical parts contributing to their operation shall be subjected to safety tests.
Electric ovens with forced convection, power less than 4 kW, a useful horizontal area of the cavity less than 2400 cm2 and production capacity less than 25 loaves per cycle, as well as any oven over 20 kW and domestic ovens that belong to the scope of IEC 60335-2-6 and IEC 60335-2-9 standards, covered by Portaria No. 371/2009, are excluded from compliance with the energy consumption requirements.
According to Article 6, when sold in physical or virtual places, products must bear the ENCE in a visible manner and, in the case of virtual commerce, the site administrator must provide the ENCE or the information contained therein in text format on all pages where the product is offered or displayed, in an ostensible, unambiguous manner next to the image or identification of the product model. The same applies to sales catalogues.
Annex I deals with the Technical Quality Regulations and sets out the mandatory requirements for commercial electric ovens. Compliance with the technical standards ABNT NBR NM 60335-1:2010, IEC 60335-2-36:2017, IEC 60335-2-42:2009 and IEC 60335-2-102:2012 presumes conformity of the technical electrical safety requirements.
It also provides for performance requirements, electrical safety requirements, marking and instruction requirements, and others.
Concerning marking, the product must be supplied with adequate information, legible, and located in an appropriate place, the instruction for use, maintenance, and installation, which is essential for the use of the appliance without any safety risks for the user.
The ovens must be marked with:
Annex II mentions the pre-market requirements and highlights the conformity assessment requirements for commercial electric ovens. It establishes criteria and conformity assessment procedures focusing on safety and performance through certification to prevent accidents in their use and the conservation of electrical energy.
In addition, it details the entire procedure and stages of the conformity assessment mechanism and determines that the certification of commercial electric ovens must be conducted by family, which is constituted as the set of models, produced in the same manufacturing unit, intended for the same function and that can be grouped according to their constructive characteristics.
Finally, Annex III demonstrates the Conformity Identification Mark and the National Energy Conservation Label - ENCE.
This Portaria enters into force on 1 July 2021.
Japan: wireless
Radio Act Enforcement Regulations, Ordinance No. 14, 1950 and Others - Amendment - (on power-line communication for IoT) Ordinance No. 65, 2021
In force (since Jun 30, 2021)
On 30 June 2021, the Japanese Ministry of Internal Affairs and Communications issued an amendment to the Radio Act Enforcement Regulations and the Radio Equipment Regulations.
The amendment aims to introduce advanced systems on Power Line Communication and expands service spaces of Power Line Communication to meet the market demand. The Power Line Communication is expected to be one of the effective means of constructing an IoT infrastructure such as sensor information collection in a factory where wireless communication is difficult.
The main changes in the amendment include:
The Ordinances entered into force on 30 June 2021.
Kenya: safety
Public Notice on Product Registration, July 2021
The Kenya Bureau of Standards (KEBS) is a statutory body established under the Standards Act, CAP 496, Laws of Kenya. KEBS is mandated to offer among other services, quality inspection of imports based on Kenya Standards or approved specifications.
Pursuant to the publication of Legal Notice Number 212 of 18th December 2020, we would like to notify all importers and the general public that, KEBS has started registration of low risk imported products on the basis of certification recognized by KEBS. All registered product will be subjected to destination inspection at the importer’s expense at the rate that would be applicable if inspection had been undertaken in the exporting country by an inspection body appointed by KEBS. Please note, the application forms for product registration can be downloaded from KEBS website: www.kebs.org.
KEBS wishes to further notify that the requirements and guidelines for product registration as well as Legal Notice 212 of 2020 are available in the KEBS website for reference. For further clarification, please contact KEBS on telephone +254 20 6948415 / 456 / 439 / 000, E-mail: [email protected].
Israel: safety
Approving National Mandatory Standards on Household and Similar Electrical Appliances, Notice No. 5721, 2021
In force (since Jul 10, 2021)
This Notice issued by the Israeli Minister of Economy and Industry on 11 April 2021 provides a list of seventeen standards to be considered as national mandatory standards.
These standards were notified to the World Trade Organization on 15 April 2021 under the following references:
SI 900 part 2.11 - Household and similar electrical appliances - Safety: Particular requirements for tumble dryers (G/TBT/N/ISR/1083/Add.1)
SI 900 part 2.60 - Household and similar electrical appliances - Safety: Particular requirements for whirlpool baths and whirlpool spas (G/TBT/N/ISR/1078/Add.1)
SI 900 part 2.52 - Household and similar electrical appliances - Safety: Particular requirements for oral hygiene appliances (G/TBT/N/ISR/1077/Add.1)
SI 900 part 2.12 - Household and similar electrical appliances - Safety: Particular requirements for warming plates and similar appliances (G/TBT/N/ISR/1076/Add.1)
SI 900 part 2.97 - Household and similar electrical appliances - Safety: Particular requirements for drives for shutters, awnings, blinds and similar equipment (G/TBT/N/ISR/1059/Add.1)
SI 900 part 2.91 - Household and similar electrical appliances - Safety: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers (G/TBT/N/ISR/1058/Add.1)
SI 900 part 2.77 - Household and similar electrical appliances - Safety: Particular requirements for pedestrian controlled mains-operated lawnmowers (G/TBT/N/ISR/1057/Add.1)
SI 900 part 2.55 - Household and similar electrical appliances - Safety: Particular requirements for electrical appliances for use with aquariums and garden ponds (G/TBT/N/ISR/1055/Add.1)
SI 900 part 2.29 - Household and similar electrical appliances - Safety: Particular requirements for battery chargers (G/TBT/N/ISR/1053/Add.1)
SI 900 part 2.66 - Household and similar electrical appliances - Safety: Particular requirements for water-bed heaters (G/TBT/N/ISR/1089/Add.1)
SI 900 part 2.16 - Household and similar electrical appliances - Safety: Particular requirements for food waste disposers (G/TBT/N/ISR/1085/Add.1)
SI 900 part 2.13 - Household and similar electrical appliances - Safety: Particular requirements for deep fat fryers, frying pans and similar appliances (G/TBT/N/ISR/1084/Add.1)
SI 900 part 2.95 - Household and similar electrical appliances - Safety: Particular requirements for vertically moving garage doors for residential use (G/TBT/N/ISR/1082/Add.1)
SI 900 part 2.85 - Household and similar electrical appliances - Safety: Particular requirements for fabric steamers (G/TBT/N/ISR/1081/Add.1)
SI 900 part 2.82 - Household and similar electrical appliances - Safety: Particular requirements for amusement machines and personal service machines (G/TBT/N/ISR/1080/Add.1)
SI 900 part 2.81 - Household and similar electrical appliances - Safety: Particular requirements for foot warmers and heating mats (G/TBT/N/ISR/1079/Add.1)
SI 900 part 2.59 - Household and similar electrical appliances - Safety: Particular requirements for insect killers (G/TBT/N/ISR/1088/Add.1)
The above standards are scheduled to enter into force on 10 July 2021, 90 days after their publication in the Official Gazette of Israel.
Official Gazette No. 9314, 11.04.2021, p. 2918
Israel: telecom
License Exemption for LTE and IMT 2020 Equipment According to Communications Order 5772-2012, Notice, June 2021
In force (since Jan 01, 2022)
On June 27, 2021, the Israeli Ministry of Communications announces that RTN terminal equipment designed to operate in at least one of the LTE, IMT2020 technologies and in at least one of the frequency ranges listed in the notice, fulfills the condition set out in section 2 (2) of Telecommunications (Bezeq and Broadcasting) Order, 5772-2012.
The notice will take effect on 01 January 2022.
KSA: safety
SASO changes the date the IECEE Recognition Certificate becomes mandatory for a number of products
On 10 March 2021, the Saudi Organization for Standardization, Metrology and Quality SASO had announced that obtaining the IECEE national recognition certificate for a number of electrotechnical products is becoming mandatory starting from 1 July 2021. However, SASO published a recent update on their official website changing the date to 1 September 2021 instead.
The products covered by this announcement are still the same, and they are:
Chargers and other accessories
Brazil: safety and energy efficiency
Approving Technical Requirements for Conformity Assessment and Energy Labelling of Air Conditioners, Portaria No. 269, 2021
In force (since Jul 01, 2021)
On 26 June 2021, Brazil's National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 269 to approve the conformity assessment requirements for air conditioners.
This Portaria approves the consolidated regulation for air conditioners and establishes the technical regulation on conformity assessment and specifications for the conformity identification mark through Annexes I and II.
It applies to monoblock, single-body window or wall-mounted, and split-system type air conditioner, with a cooling capacity of up to 17.58 kW (60,000 BTU/h).
The following products are excluded from the scope of this Portaria:
According to Article 5, when sold in physical or virtual places, products must bear the ENCE in a visible manner and, in the case of virtual commerce, the site administrator must provide the ENCE or the information contained therein in text format on all pages where the product is offered or displayed, in an ostensible, unambiguous manner next to the image or identification of the product model. The same applies to sales catalogues.
Annex I deals with the pre-market and conformity assessment requirements for air conditioners. Air conditioners manufactured, imported, distributed and marketed in the national territory must be subject to conformity assessment through the supplier declaration mechanism. The certification of air conditioners must be conducted by family, which is constituted as the set of models, produced in the same manufacturing unit, intended for the same function and that can be grouped according to their constructive characteristics.
The Air conditioners must be subjected to all the safety tests laid down in IEC 60335-1 and IEC 60335-2-40.
Finally, Annex II demonstrates the Conformity Identification Mark and the National Energy Conservation Label - ENCE.
This Portaria entered into force on 1 July 2021.
South Korea: safety
Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act, KATS Notice 2007-1268 - Amendment - (on change of detailed items/model classification related to ice grinders) Notice No. 2021-177
In force (since Jul 05, 2021)
On 5 July 2021, the South Korean Agency for Technology and Standards (KATS) issued an amendment to the Notice on Operation Bulletin of Electrical Appliances and Consumer Products Safety Control Act.
The amendment was issued to reflect changes of the amendment (Regulation 420 of 2021) to the Enforcement Regulation of the Electrical Appliances and Consumer Products Safety Control Act.
Specifically, the Notice removes hand-operated mechanical ice grinders from Annexes 5 (detailed items of household goods subject to safety confirmation) and 13 (specific standards for model classification of household goods subject to safety confirmation), and adds the said products to Annexes 6 and 14 for household items subject to supplier conformity confirmation/assurance of conformity.
The Notice entered into force on 5 July 2021, but Annexes 5, 6, 13 and 14 on ice grinders will become effective on 28 November 2021.
모로코: 무선
저전력 단거리 장치 사용을 위한 기술 조건, 고시 ART/DG/No. 07/2020 - 개정 - (Wifi 6E 허가 및 신규 응용에 관한), 고시 ANRT/DG/No. 7/2021
2021년 6월부터는 최대 10Gb/s의 이론적인 연결 속도를 지닌 최신 버전의 WiFi 표준을 사용할 수 있습니다. 좀 더 구체적으로, Wifi 6는 더 많은 데이터 전송과 더 강력한 프로세서 덕분에 이전 제품에 비해 처리량이 40% 증가할 것입니다. 이는 2021년 5월 7일의 새로운 고시 ANRT/DG/N°07/21에 의해 저전력 및 단거리 장치로 구성된 무선 설비의 기술적 조건을 설정한 2020년 6월 25일의 고시 ANRT/DG/N°07/20의 개정에 따라 가능합니다. WiFi 6E는 WiFi 5와 6을 보완합니다(2.4GHz 및 5GHz 대역에서 모로코에서 이미 허가됨). 현재의 WiFi에 추가 주파수를 더하여 높은 검색 속도(핫스팟마다 최대 9.6Gbps)와 원격 작업, 화상 회의, e-러닝 및 증강 가상 현실과 같은 활동에 대한 대기 시간을 단축할 수 있습니다.
이 개정판에서는 일부 새로운 애플리케이션도 도입되었습니다(24-24.25GHz 대역에서 작동하는 일방향 장애물 감지 레이더, 일부 주파수 대역에서 작동하는 저전력 단거리 휴대용 장치). 모로코는 아프리카에서 WiFi 6E 기술을 승인한 첫 번째 국가로서, 이제는 모든 스마트폰, 노트북, 태블릿 등을 점차적으로 장착할 예정입니다.
우루과이: 안전
2021년 6월 1일부터 저전압 전기 제품 승인 신청 절차는 더 이상 단일 대외 무역 창구(VUCE, Ventanilla Unica de Commercio Externace) 플랫폼을 통해 수행되지 않고 온라인 URSEA 시스템을 통해 수행됩니다. 이미 유효한 인증을 받은 제품은 추가 절차를 수행할 필요가 없습니다.
프로젝트 "100% 온라인 절차"(행정 권한 규정 제184/015호)의 틀 내에서, URSEA는 저전압 전기 제품 안전 규정에서 확립된 저전압 전기 제품 마케팅을 위한 승인 요청의 온라인 프로세스를 구현했습니다. 예외적 절차도 있지만 이는 공통 절차에도 적용됩니다.
Ursea Resolutions No. 0170/020 및 069/021의 규정에 따라 이러한 절차는 이제 온라인으로만 수행될 수 있으며, 이는 디지털 적합성 인증서로 이어집니다.
베트남: 통신
베트남 MIC는 2021년 7월 1일부터 시행되는 MIC 형식 승인 및 자체 평가 DOC 범위에 따라 새로운 제품 목록을 규정하는 Circular 11/2020/TTT-BTT를 수정 및 보완하기 위해 2021년 5월 14일자로 발행된 Circular 01/202020/TTTTTTT를 발표했습니다.
베트남 MIC의 01/2021/TT-BTT 요약:
1. MIC는 다음을 포함한 새로운 국가 기술 표준(QCVN)을 목록에 업데이트했습니다.
(1) QCVN 54:2020/BTTT(WLAN / BT / Zigbee의 경우 2.4에서 작동)GHz 대역)
(2) QCVN 74:2020/BTTT(1GHz ~ 40GHz SRD의 경우)
(3) QCVN 117:2020/BTTT(육상 이동 단말기 및 휴대 전화용)
(4) QCVN 122:2020/BTTT(LPWAN 제품 및 센서용)
(5) QCVN 101:2020/BTTT(휴대전화, 태블릿, 노트북에 사용되는 리튬 배터리용)
그리고 그 밖의 새로운 국가 기술 표준은 거의 없습니다.
2. MIC는 Tx 전력이 60mW 미만인 부속서 I의 항목 2(9kHz ~ 400GHz의 무선 주파수를 사용하는 무선 송신기)에 대한 송신기 및 송수신기의 예외를 없앴습니다. (이 변경사항은 부속서 I의 항목 3에 분류되어 있는 Wi-Fi, BT, Zigbee 2.4GHz 및 2.4GHz SRD 제품에 영향을 미치지 않습니다. 이러한 제품은 RF 전력이 60mW EIRP 미만인 경우에도 여전히 면제됩니다.)
3. LPWAN 제품은 이전과 달리 SRD로 간주되지 않습니다. (RF 전력이 25mW ERP를 초과할 경우 MIC 주파수 허가를 신청해야 함). MIC는 LPWAN 920MHz ~ 923MHz 및 LPWAN 433MHz에 대한 새 섹션을 만들었습니다. 한편, MIC는 또한 Circular 46/2016/TTTT를 보완하기 위해 새로운 Circular의 LPWAN에 대한 주파수 및 Tx 전력에 대한 규정을 입안하고 있습니다. 현재 Circular 46/2016/TTTTTTT를 수정 및 보완하기 위해 Circular 46/2016/TT/TTTTT는 여전히 공식 발행 되지 않았습니다. 하지만 Tx가 25mW 이상인 LPWAN/LoRa 제품은 Circular에 맞춰 출시해야 합니다. Tx 전력이 25mW 이상인 LPWAN 제품에 대한 형식 승인을 신청하려면우리는 MIC가 LoRa/LPWAN을 추가하기 위해 공식 회람을 발행할 때까지 기다려야 하며 VNTA는 신청자에게 MIC 주파수 허가를 제출하도록 요청할 수 있습니다.
4. 베트남 MIC는 QCVN 101:2020/B 항목 2.5에 따른 리튬배터리 성능시험/책임시험을 시행하지 않기로 결정했습니다. TTT(IEC 61960-3:2017) 및 QCVN 101:2020/B 항목 2.6에 따른 안전 테스트만 실시되며TTT (IEC 62133-2:2017)가 요구되어야 한다. 그러나 MIC는 QCVN 101:2020/B에 대한 전체 테스트를 요청할 수 있습니다.TTT는 국지적 역량이 축적되면 가까운 장래에 안전성 테스트와 성능 테스트를 모두 포함할 것입니다.
5. Circular 01/2021/TT-BTT에 따르면 해상 레이더는 수입 시 "제품 품질 검사 등록"(PQIR)이 면제되지만, 여전히 적합성 선언을 진행해야 합니다. 단, 규정 74/2018/ND-CP에 따라 PQIR 과정의 일환으로 적합성 선언 단계를 진행하여야 합니다. 따라서 해상 레이더에 대해 수입업체는 PQIR을 적용하지 않고 해상 레이더 적합성 선언을 신청하는 방법에 대한 지침을 VNTA/MIC에 문의해야 합니다.
01/2021/TT-BTTT와 함께 발행된 부속문서 I 및 부속문서 II는 2021년 7월 1일부터 발효되며, 부속문서 I 및 부속문서 II를 순환 11/2001/TTTT로 대체합니다.
번역본을 첨부했습니다
MIC에서 공식 다운로드된 내용입니다.
인증 대상 잠재적으로 안전하지 않은 ICT 제품 목록, Circular 11/2020/TT-BTT - 개정안 제안 - (부속문서 I 및 II의 인증 또는 선언 대상 ICT 제품 목록), Circular 1/2021/TTTT, 2021
2021년 5월 14일, 베트남 정보통신부는 정보통신부 관리 하에 잠재적으로 안전하지 않을 수 있는 제품과 상품의 목록을 제공하는 2020년 5월 14일자 부록 I 및 II의 순환 개정을 승인했습니다.
본 회람은 부속문서 I 제1.2절에 따른 필수 인증 및 적합성 평가 대상 이동 통신 장비 목록을 수정하는 것을 목적으로 합니다.
본 회람은 또한 부속문서 II에 따른 선언의 대상이 되는 다음 ICT 제품 및 상품에 적용되는 기술 규정에 대한 언급을 수정합니다.
● 디지털 지상파 텔레비전 셋톱박스 DVB-T2 (셋톱박스 DVB-T2)
● 데스크탑 컴퓨터, 노트북 및 태블릿
● VHI 장비.
본 회람은 2021년 7월 1일부터 시행합니다.
우즈베키스탄: 안전
기술 규정 분야의 공공행정 개선 조치, 법령 UP-6240, 2021년
2021년 6월 2일, 우즈베키스탄 대통령은 기술 규제 분야에서 공공 행정의 기능을 개선하는 것을 목표로 하는 포고령을 승인했습니다. 이 고시 우즈베키스탄에서 고품질의 안전한 제품의 수입을 촉진하기 위한 적합성 평가 절차를 간소화하도록 규정하고 있습니다.
이 고시는 2021년 9월 1일부터 특정 저위험 제품의 적합성 평가를 적합성 증명서의 발행 없이 적합성 선언에 의해 수행하도록 규정하고 있습니다. 적합성 선언서는 기술 규정에 따라 종합 제품 테스트를 수행한 후 테스트 보고서에 기초하여 작성되어야 합니다. 제조업체, 공급업체 및 거래자는 기술 규정 및 표준에서 정한 필수 요구 사항을 준수할 책임이 있습니다.
고시는 또한 2021년 11월 1일자로 다음을 규정합니다.
(a) 특정 고위험 제품의 수입을 위한 국가 등록 절차를 도입해야 합니다. 수입 제품이 기술 규정에 부합함을 확인하는 서류는 적어도 우즈베키스탄에 제품이 도착하기 15일 전에 세관 전자 프로그램에 등록되어야 합니다. 관세청으로 제품을 이전(즉, 무료 유통을 위한 석방)하는 작업은 우즈베키스탄에 설립된 공인 적합성 평가 기관이 발행한 문서에 기초하여 주 관세청이 수행해야 합니다.
(b) 단일 적합성 인증서를 가진 저위험 제품의 수입은 24개월 동안 허가됩니다. 적합성 인증서는 우즈베키스탄에 설립된 인증 적합성 평가 기관이 발급해야 합니다.
(c) 수입 제품의 적합성 관리는 기술규제청 또는 해당 구조의 일부인 공인 기관에 의해 수행되어야 합니다.
(d) 비준수 제품의 목록은 기술규제청 또는 공인기관에 의해 유지되어야 합니다.
저위험 또는 고위험 프로파일에서 고려해야 할 제품 유형은 정령에서 명시되지 않습니다. 이러한 문제는 나중에 투자통상부에 의해 결정될 것입니다. 제17조는 기술규제처의 활동을 조직하고 고위험제품의 국가등록 절차, 저위험제품의 적합성 평가, 적합성 선언, 그리고 부적합한 제품의 유통에 대한 등록 및 철회를 위한 법률을 채택할 것을 의무화하고 있습니다. 기술 규정 및 표준을 준수합니다.
이 법령은 두 개의 부속문서를 포함합니다.
부록 1은 2021년 "국가 품질 인프라" 개발을 위한 로드맵을 제공합니다.
별첨 2는 특정 대통령령을 개정합니다.
이 법령은 2021년 6월 3일부터 시행되었습니다.
출판물 참조 자료입니다.
Собрание законодательства Республики Узбекистан, 03.06.2021
모리타니: 통신
다음은 ARE(Autorité de République de La Mauritanie)가 2021년 5월 24일 웹 사이트에 발표한 모리타니아 새 형식 승인 규정 업데이트입니다.
이 새로운 규정은 다음과 같은 많은 분야에 적용됩니다.
1- 형식 승인 절차입니다.
프로세스가 변경되지 않았으며 리드 타임은 그대로 유지됩니다.
2- 샘플 필요
문서에는 샘플 제출에 대한 내용이 나와 있습니다. 지원자는 기술 시험을 위해 재료의 샘플을 제공해야 합니다. 샘플에는 다음 정보가 포함되어야 합니다.
- 브랜드 및 유형
- 시스템의 다양한 모듈 및 카드에 대한 코드
그러나 지금은 샘플이 요청되지 않습니다. 마지막으로 승인된 인증서가 샘플 제출 없이 수행되었습니다.
3 - 인증서 유효성 및 갱신 프로세스입니다.
인증서는 5년간 유효합니다.
제13조에 따르면 인증서 갱신은 현재 인증서가 만료되기 4개월 전에 이루어져야 하며, 장비가 어떠한 수정도 이루어지지 않았음을 알립니다.
4 - 새 승인을 위해 다시 제출합니다.
제13조에 따르면 승인된 장비의 특성이 변경된 경우 새로운 승인을 위한 재제출이 필요합니다.
5 - 라벨/표시
모리타니아의 경우 표시는 필수 사항입니다.
그러나 다음과 같은 경우에는 라벨이 동봉 문서에 포함될 수 있습니다.
- 최종 사용자가 장비에 접근할 수 없습니다.
- 및/또는 (b) 제품의 크기 때문에 공간이 제한됩니다.
말레이시아: 통신
말레이시아 MCMC는 2021년 6월에 class 를 발행하였습니다.
새 class 의 할당링크입니다.
인도: 안전
2021년 6월 7일 인도 BIS는 2022년 6월 1일까지 BIS 플러그/소켓 표준의 의무 표준을 연장하는 회람을 발행했습니다.
Circular 링크를 참조하시기 바랍니다.
사우디: 안전
표본 리스트, 결정 No. 180, 2021년 6월 채택합니다.
사우디아라비아 표준, 도량형 및 품질 기구(SASO)는 다양한 부문과 관련하여 채택된 표준 목록을 발표했습니다. 이 목록은 2021년 6월 25일 관보에 발표되었으며, 표준은 주로 국제 (ISO, IEC 및 ASTM) 표준에서 파생되었습니다.
관보에 게재된 후 6개월이 경과하면 다음 각 호의 적용을 의무화합니다.
● SASO IEC 62368-3:2021 오디오/비디오, 정보통신기술 장비 - Part 3: 통신 케이블 및 포트를 통한 직류 송전 안전성 측면,
● SASO IEC 60669-2-5:2021 가정용 및 이와 유사한 고정 전기 설비용 스위치 - Part 2-5: 특정 요구 사항 - 가정 및 건물 전자 시스템(HBES)에서 사용하기 위한 스위치 및 관련 부속품,
● SASO IEC 60669-2-6:2021 가정용 및 이와 유사한 고정 전기 설비용 스위치 - Part 2-6: 특정 요구 사항 - 외부 및 내부 표지 및 조명용 소방관 스위치,
● SASO 2663:2021 에어컨 – 소형 윈도우 및 분할형 에어컨에 대한 에너지 효율, 라벨링 및 테스트를 위한 최소 요건입니다.
이 목록에는 필수 표준 SASO 2938:2019의 개정판이 포함되어 있습니다. 개정판에는 AM 라디오 기술이 전기 자동차의 옵션 사양이 될 수 있다고 명시되어 있지만, 다른 기술(FM, DAB+)은 여전히 필수 사항입니다. 수정된 표준 제목은 SASO 2938:2019/AMD1:2021 AM/FM/T-DAB+용 라디오, 디지털 및 아날로그 방송 수신기의 기술 사양으로 변경됩니다.
2021년 7월 1일부터 새로운 필수 표준 SASO IEC 62368-1:2020 오디오/비디오, 정보 및 통신 기술 장비 - 파트 1: 안전 요구 사항이 다음 두 표준을 대체합니다.
● SASO GSO IEC 60950-1:2012,
● SASO IEC 60065:2020
무엇보다도, 다음 표준의 적용은 자발적입니다.
● SASOEN 1186-1:2021 식품과 접촉하는 자재 및 물품입니다. 플라스틱이요 전체 마이그레이션을 위한 조건 선택 및 테스트 방법을 안내합니다.
● SASOEN 14233:2021 식품과 접촉하는 재료 및 물품입니다. 플라스틱이요 이동 테스트를 위한 적절한 온도를 선택하기 위해 마이크로파 및 기존 오븐 가열 중 플라스틱/식품 인터페이스에서 플라스틱 재료 및 제품의 온도를 결정합니다.
● SASO ISO 14064-1:2021 온실가스 — Part 1: 온실가스 배출 및 제거에 대한 정량화 및 보고에 대한 조직 차원의 지침이 포함된 사양입니다.
● SASO ISO 14064-2:2021 온실가스 — Part 2: 온실가스 감축 또는 제거 개선사항의 정량화, 모니터링 및 보고에 대한 프로젝트 수준의 지침을 포함한 사양입니다.
● SASO ISO 14064-3:2021 온실가스 — Part 3: 온실가스 명세서의 검증 및 검증을 위한 지침이 수록된 사양입니다.
이 요약에는 하이라이트가 포함되어 있습니다.
대만: 안전
전기 담요 및 기타 63개 제품의 제한 물질 라벨 부착을 포함한 필수 물품 검사 규칙 개정, 공지 사항 10630000780, 2017 - 개정 - (fan 및 기타 6개 제품에 대한 검사 기준) No. 11030003190, 2021
시행(2021년 6월 24일 발행)됩니다.
2021년 6월 24일 대만 표준, 도량형 및 검사국(BSMI)은 선풍기, 진공 청소기, 전기 식품 분쇄기, 전기 주스기, 헤어 파마기 및 전기 마사지 기기에 대한 필수 물품 검사 규정을 개정하기 위한 고시를 발표했습니다.
이 개정안은 검사 범위에 보조 셀/배터리가 장착된 제품을 추가합니다.
본 개정판에서 다루는 7개 제품에 사용되는 2차 리튬 전지/배터리는 CNS 15364: 2013 및 CNS 62133-2: 2018 섹션 7.3.8.1 "진동" 및 7.3.8.2 "기계 충격"을 준수해야 합니다.
다음 제품은 필수 물품 검사 규칙에서 면제됩니다.
● 입력 전압이 DC 5V인 전원 공급용 USB 연결만 있고 전원 어댑터 없이 보조 배터리로 전원이 공급되지 않는 제품입니다.
● 자동차 담배 라이터 어댑터로 자동차 전원으로만 충전하고 보조 배터리는 사용하지 않는 제품입니다.
● 3상 전압 또는 기본 배터리를 전원 공급으로만 사용하는 제품입니다.
● BSMI가 발표한 검사 대상 장난감 제품입니다.
개정안에 따르면, 개정된 검사범위는 2023년 1월 1일부터 수입 및 국산 제품에 대해 시행될 예정입니다. 2022년 12월 31일 이전에 발급된 인증서는 만료일까지 유효합니다.
이 개정안은 2021년 6월 24일부터 시행되었습니다.
인도네시아: 통신
SDPPI는 2021년 6월 7일에 모든 해외 테스트 보고서(SDPPI에서 수락되는)에 대해 SDPPI 기술 요구 사항에 따라 결과 요약을 제공해야 한다고 발표했습니다. 이 요건은 2021년 7월 4일부터 적용됩니다.
공지 링크를 확인하시기 바랍니다.
태국: 안전
에어컨에 대한 필수 안전 요구사항, 각료 규정, B.E. 2564, 2021년
승인(2022년 6월 15일부터 시행됩니다)
2021년 6월 16일, 태국 산업부는 에어컨의 필수 안전 요건에 대한 각료 규정을 발표했습니다.
이 규정은 주로 에어컨이 2020년 발표 번호 5822에 의해 통보되고 산업 제품 표준법에 따라 발행된 산업 표준 TIS 1529-2561을 준수해야 한다고 규정하고 있습니다.
본 표준은 2022년 6월 15일부터 의무적으로 적용됩니다.
Publication References - Thai Government Official Gazette No. 138/40, 16.06.2021, p.6
영어 원문
Morocco: wireless
Technical Conditions for the Use of Low Power Short Range Devices (SRD), Decision ANRT/DG/No. 07/2020 - Amendment - (on Wifi 6E Authorization and New Applications), Decision ANRT/DG/No. 7/2021
Approved (enacted on May 07, 2021)
From June 2021, it will be possible to use the latest evolution of the WiFi standard, which has a maximum theoretical connection speed of 10 Gb/s. More specifically, Wifi 6 will allow a 40% increase in throughput compared to its predecessor thanks to higher data transfer and more powerful processors. This is made possible following the revision of the decision ANRT/DG/N°07/2020 of June 25, 2020 setting the technical conditions for the use of radio installations composed of low power and short range devices by the new decision ANRT/DG/N°07/21 of May 07, 2021. WiFi 6E complements WiFi 5 and 6 (already authorized in Morocco in the 2.4 GHz and 5 GHz bands). It will bring additional spectrum to the current WiFi allowing high browsing speeds (up to 9.6 Gbps by any hotspot) and reduced latency for activities such as teleworking, video conferencing, e-learning and augmented virtual reality.
On the occasion of this revision, some new applications have also been introduced (omnidirectional obstacle detection radars operating in the 24-24.25 GHz band, low-power short-range portable devices operating in some frequency bands). Morocco is the first country in Africa to have authorized WiFi 6E technology, which will now gradually equip all smartphones, laptops, tablets, etc.
Uruguay: safety
Uruguay - Online Process for Authorization Requests for Commercialization of Low Voltage Electrical Products
As of June 1, 2021, the application process for the Authorization of Low Voltage Electrical Products will no longer be carried out through the platform of the Single Window for Foreign Trade (Ventanilla Única de Comercio Exterior, VUCE), but through the online URSEA System. Products that already have valid authorization do not need to carry out any additional procedure.
Within the framework of the project “Procedures 100% Online” (Decree No. 184/015 of the Executive Power), URSEA has implemented an online process for Requests of Authorization for the Marketing of Low Voltage Electrical Products, as established in the Safety of Low Voltage Electrical Products Regulation; this applies to the common procedure as well as to the procedure by exception.
In accordance with the provisions of Ursea Resolutions No. 0170/020 and 069/021, these procedures may now only be carried out online, leading to digital certificates of conformity.
Vietnam: telecom
Vietnam MIC has released Circular 01/2021/TT-BTTTT dated May 14, 2021 to amend and supplement the Circular 11/2020/TT-BTTTT stipulating the new list of products under MIC Type Approval and Self-assessment DoC scope which shall take effect from July 01, 2021.
Summary of Circular 01/2021/TT-BTTTT of Vietnam MIC:
1. MIC has updated new national technical standards (QCVN) to the list including:
(1) QCVN 54:2020/BTTTT (for WLAN / BT / Zigbee operates in 2.4GHz band)
(2) QCVN 74:2020/BTTTT (for 1GHz ~ 40GHz SRD)
(3) QCVN 117:2020/BTTTT (for land mobile terminals and mobile phones)
(4) QCVN 122:2020/BTTTT (for LPWAN products and sensors)
(5) QCVN 101:2020/BTTTT (for lithium batteries used for mobile phone, tablet, laptops)
And few other new national technical standards
2. MIC has removed exemption for transmitter and transceiver for product listed under item 2. of the Annex I (Radio transmitter, transceivers using radio frequency from 9 kHz to 400 GHz) which have Tx power under 60mW. (This change does not affect Wi-Fi, BT, Zigbee 2.4GHz, and 2.4GHz SRD products because they are categorized under item 3. of Annex I. These products are still exempted if having RF power under 60mW EIRP)
3. LPWAN products are now not considered as SRD like before (and allowed to have RF power exceed 25mW ERP but need to apply for MIC frequency permit in case RF power over 25mW). MIC created a new section for LPWAN 920MHz ~ 923MHz and LPWAN 433MHz. On the other hand, MIC is also drafting regulations on operating conditions (frequency and Tx power for LPWAN in a new Circular to supplement Circular 46/2016/TT-BTTTT) .At this moment, MIC circular on license-free frequency bands to amend and supplement Circular 46/2016/TT-BTTTT (adding LoRa / LPWAN) is still at drafting status and not been officially released yet. But it must soon be released so as to be in-line with this Circular for LPWAN / LoRa products having Tx over 25mW. In order to apply for Type Approval for LPWAN products with Tx power over 25mW, we must wait till MIC issue formal circular to add LoRa / LPWAN and the VNTA may request applicant to submit MIC frequency permit.
4. Vietnam MIC has decided not to enforce performance test / liability test for lithium battery according to item 2.5 of the QCVN 101:2020/BTTTT (IEC 61960-3:2017) yet and only safety test according to item 2.6 of the QCVN 101:2020/BTTTT (IEC 62133-2:2017) shall be required. BUT MIC may request to do full testing for QCVN 101:2020/BTTTT including both safety test and performance test in near future once their local capability build up.
5. According to the Circular 01/2021/TT-BTTTT, maritime radars are exempted from "Product Quality Inspection Registration" (PQIR) when importing, but still need to proceed Declaration of Conformity .However, according to Decree 74/2018/ND-CP, the Declaration of Conformity step must be proceeded as a part of PQIR process. So for maritime radar, the importer must need to contact VNTA / MIC for guidance on how to apply for Declaration of Conformity for maritime radars without applying for PQIR.
The Annex I and Annex II issued together with Circular 01/2021/TT-BTTTT shall take effect from July 01, 2021 and replace the Annex I and Annex II issued together with Circular 11/2001/TT-BTTTT.
Vietnam: telecom
List of Potentially Unsafe ICT Products Subject to Certification, Circular No. 11/2020/TT-BTTTT - Proposed Amendment - (on the list of ICT products subject to certification or declaration in Annexes I and II), Circular No. 1/2021/TT-BTTTT, 2021
Approved (coming into force on Jul 01, 2021)
On 14 May 2021, the Vietnamese Ministry of Information and Communications approved a Circular amending Annexes I and II of Circular No. 11/2020 / TT-BTTTT of 14 May 2020 providing a list of potentially unsafe products and goods under the management of the Ministry of Information and Communications.
This Circular aims to modify the list of mobile communication equipment subject to compulsory certification and conformity assessment under section 1.2 of Annex I.
This Circular also modifies references to technical regulations applicable to the following ICT products and goods subject to declarationunder Annex II:
This Circular shall enter into force on 1 July 2021.
Zambia: wireless
Type Approval, Guidelines, April 2021
In force (published on Apr 09, 2021)
"These Guidelines shall apply to any electronic communications apparatus to be used, supplied, sold, offered for sale, leased or hired in the Republic provided the electronic communications apparatus is constructed or adapted for use as part of, or for the purpose of, an electronic communications service.
7.1. Unless otherwise determined by the Authority, a manufacturer, distributor, importer or supplier shall ensure that type approved electronic communications apparatus is affixed with a legible label-
(a) Approved by the Authority as shown in Appendix 3;
(b) Issued by a National Regulatory Authority or a Conformity Assessment Body where the electronic communications apparatus is approved using the type acceptance process.
7.2. A manufacturer, distributor, importer or supplier shall ensure that the label referred to in 7.1 is visible and legible at all times.
7.3. A label shall be affixed on the electronic communications apparatus, the packaging and included in the user manual.
7.4. Where affixing a label as prescribed in 7.3 is not feasible, an alternative method of displaying the label approved by the Authority in writing may be used.
7.5. A manufacturer, distributor, importer or supplier shall ensure that a label is affixed on an electronic communications apparatus before it is imported, supplied, sold, offered for sale or leased."
Brazil: telecom
As announced December last year, we kindly remind you the ANATEL Act 7280 will become in force after June 1st.
Here are the main changes:
Some type of products will be acceptable to approve by Declaration of Conformity (DoC). Examples: Connectors, Broadcasting equipment, RF Power Amplifier for Earth Station, Earth Station Modem, Satellite transceiver, XDSL Filter - Central Splitter and others.
Morocco: safety
Products Subject to Technical Regulations, List, April 2021
The Moroccan Ministry of Industry, Trade Investment and the Digital Economy has issued a list indicating the products that are subject to technical regulations in Morocco. The list contains regulated products, along with their corresponding standards.
Also released are a list specifying which products are controlled at the country of origin with their customs codes, and another showing products that are inspected upon arrival in Morocco.
Moroccan regulation covers a wide range of products including, but not limited to:
On 22 April 2021, the Moroccan Ministry of Industry, Trade Investment and the Digital Economy issued an updated list of Moroccan technical regulations, in addition to an updated list of products that are subject to inspection both in the country of origin and upon arrival into the Kingdom.
Control at the border of Morocco now applies to the following products, among others:
Hygiene items: Baby diapers.
Korea: energy efficiency
South Korea: Regulation on Promotion and Supply of High Energy Efficient Equipment, Notice No. 2000-103 - Amendment - (on expanding the scope of application of smart LED lighting) Notice No. 2021-68
In force (since Apr 20, 2021)
On 20 April 2021, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued an amendment to the Regulation on Promotion and Supply of High Energy Efficient Equipment.
The amendment primarily expands the scope of products subject to certification of smart LED lighting to include single lighting equipment, such as lamps and luminaires.
These include LED lamps with built-in converter for general lighting that are capable of dimming control for energy saving through wired/wireless communication at AC 220 V, 60 Hz, and apply an integrated LED light source and the base specified in KSC 7651.
Luminaires with integrated or built-in LED light source that are capable of dimming control for energy saving by wired/wireless communication at AC 220 V, 60 Hz are also in scope.
The amendment also establishes provisions that allow non-face-to-face factory inspections or audits in cases where site visits are difficult due to the risk of infectious diseases, etc., and aligns the reference standards and terminology of luminaires and LED lamps with the revised KS standards.
The amendment entered into force on 20 April 2021 and is contained in the consolidated version of the text.
Uzbekistan: safety
Measures to Improve Public Administration in the Field of Technical Regulations, Decree No. UP-6240, 2021
In force (since Jun 03, 2021)
On 2 June 2021, the President of the Republic of Uzbekistan approved a decree that aims at improving the functioning of public administration in the field of technical regulation. The Decree provides for the simplification of conformity assessment procedures to facilitate the import of high-quality and safe products in Uzbekistan.
This Decree establishes that from September 1, 2021, conformity assessment of certain low-risk products shall be carried out by declaration of conformity without the issuance of a certificate of conformity. The declaration of conformity shall be drawn up on the basis of test reports after carrying out comprehensive product tests in accordance with technical regulations. Manufacturers, suppliers, and traders remain responsible for ensuring compliance with the mandatory requirements established by technical regulations and standards.
The Decree also establishes that as of November 1, 2021 :
(a) A state registration procedure for the import of certain high-risk products shall be introduced. Documents confirming the conformity of imported products to technical regulations shall be registered with the customs electronic program at least 15 days before the arrival of the products in Uzbekistan. Transfer of products to the customs regime (i.e. release for free circulation) shall be carried out by the State Customs Service on the basis of documentation issued by an accredited conformity assessment body established in Uzbekistan.
(b) The import of low-risk products with a single certificate of conformity will be authorized for a period of 24 months. The certificate of conformity shall be issued by an accredited conformity assessment body established in Uzbekistan.
(c) Controls of conformity of imported products shall be carried out by the Technical Regulation Agency or an authorized organization that is part of its structure.
(d) A list of non-compliant products shall be maintained by the Technical Regulation Agency or an authorized organization.
The types of products to be considered with low-risk or high-risk profiles are not specified in the Decree. These issues will be determined at a later date by the Ministry of Investment and Foreign Trade. Article 17 mandates the Ministry to adopt legislation to organize the activity of the Agency for Technical Regulation and to develop procedures for state registration of high-risk products, conformity assessment of low-risk products, declaration of conformity, as well as listing and withdrawal from circulation of products that do not comply with technical regulations and standards.
The Decree includes two Annexes:
Annex 1 provides a roadmap for the development of a "national quality infrastructure" for 2021.
Annex 2 makes amendments to certain Presidential Decrees.
This Decree came into force on 3 June 2021.
Saudi Arabia: safety
Adopting a List of Standards, Decision No. 180, June 2021
In force (published on Jun 25, 2021)
The Saudi Arabian Standards, Metrology and Quality Organisation (SASO) has issued a list of adopted standards related to various sectors. The list was published in the Official Gazette on 25 June 2021, and the standards are largely derived from international (ISO, IEC and ASTM) standards.
The application of the following standards is mandatory 6 months after publication in the official gazette:
The list includes an amendment to the mandatory standard SASO 2938:2019. The amendment states that AM radio technology can be optional in electric vehicles, while the other technologies (FM, DAB+) remain mandatory. The amended standard title is changing to SASO 2938:2019/AMD1:2021 Technical specifications of the radio, digital and analog broadcasting receiver for AM/FM/T- DAB+
From 1 July 2021, the new mandatory standard SASO IEC 62368-1:2020 Audio/video, information and communication technology equipment - Part 1: Safety requirements will replace the following two standards:
The application of the following standards, among others, is voluntary:
SASO ISO 14064-3:2021 Greenhouse gases — Part 3: Specification with guidance for the verification and validation of greenhouse gas statements
Taiwan: safety
Revision of Mandatory Commodity Inspection Rules Including Restricted Substance Labelling for Electric Blankets and 63 Other Appliances, Announcement No. 10630000780, 2017 - Amendment - (on inspection standards for fans and other 6 products) Notice No. 11030003190, 2021
In force (published on Jun 24, 2021)
On 24 June 2021, the Taiwan Bureau of Standards, Metrology and Inspection (BSMI) published a Notice to amend the mandatory commodity inspection rules for electric fans, vacuum cleaners, electric food grinders, electric food mixers, electric juicers, hair perm machines and electric massage appliances.
This amendment adds products with secondary cells/batteries to the inspection scope.
Secondary lithium cells/batteries used by the 7 products covered by this amendment should comply with CNS 15364: 2013 and Sections 7.3.8.1 "vibration" and 7.3.8.2 "mechanical shock" of CNS 62133-2: 2018.
The following products are exempted from the mandatory commodity inspection rules:
According to this amendment, the revised inspection scope will be implemented from 1 January 2023 for imported and domestic products. Certificates issued before 31 December 2022 will remain valid until their expiry date.
This amendment entered into force on 24 June 2021.
Indonesia: telecom
SDPPI had announced on 7th June 2021 regarding for all Oversea Test report ( That is accepted by SDPPI) are mandatory to provide Summary of the result according to SDPPI technical requirements .
This requirement will be starting on 4th July 2021
Thailand: safety
Mandatory Safety Requirements for Air Conditioners, Ministerial Regulation, B.E. 2564, 2021
Approved (coming into force on Jun 15, 2022)
On 16 June 2021, the Thai Ministry of Industry announced a ministerial regulation on Mandatory Safety Requirements for Air Conditioners.
The Regulation primarily requires that air conditioners must comply with Industrial Standard TIS 1529-2561 notified by Announcement No. 5822 of 2020, and issued in accordance with the Industrial Product Standards Act.
The Standard will be of mandatory application with effect from 15 June 2022.
중국: CCC
강제 인증 제품 인증 연구소 지정(2021년 1차), 발표 번호 5번, 2021
2021년 4월 15일, 중국 인증관리국(CNCA)은 2021년 1차 지정 필수품 인증 연구소를 승인했습니다.
본 발표의 실험소는 관련 CNCA 구현 규칙에 대한 다음 제품의 인증을 다루도록 지정되었습니다.
● 전선 및 케이블(CNCA-C01-01)
● 보호 또는 연결을 위한 회로 스위치 및 전기 장비(전기 부속품) (CNCA-C02-01)
● 소형 전동기(CNCA-C04-01)
●가정용 및 유사장비 (CNCA-C07-01)
● 조명기기 (CNCA-C10-01)
● 자동차(CNCA-C11-01)
● 자동차 외부조명 및 조명신호장치(CNCA-C11-07)
본 발표에 관한 모든 이의신청이나 불만사항은 발행일로부터 15영업일 이내에 CNCA에 제출될 수 있습니다.
시에라리온: 무선
NATCOM 라벨 지정 요구 사항
전자통신 규정 2020의 제9조 (2)에 따라, 모든 공급업체, 수입업체, 유통업체 또는 판매업체는 해당되는 경우 판매용으로 제공된 장비 또는 민간용 장비가 다음을 포함하는 형식 승인 라벨에 명확하게 부착되어 있는지 확인해야 합니다.
I. 커미션의 로고
ii. 제품 유형/범주
iii. 고유한 형식 승인 번호
따라서 제품에 라벨을 부착해야 합니다. 그러나 이 라벨에 비해 제품이 너무 작을 경우 아래와 같이 부착할 수 있습니다.
- 라벨은 운영되는 소프트웨어 또는 " Regulatory Certification "으로 알려진 프로그램의 일부여야 합니다.
- 또는 장비 설명서의 일부여야 합니다.
라벨링 형식의 샘플은 아래에 나와 있습니다.
TAN: YYYY-PCN-UTAN
TAN=형식 승인 번호
YYYY= 인증년도(4자리 숫자)
PCN= 제품 카테고리 번호(3 자리 숫자)
UTAN= 고유 형식 승인 번호(4자리 숫자)
인도네시아: 통신
인도네시아는 전기 통신 도구 및/또는 장비에 대한 재인증 의무를 발표합니다.
2021년 4월 29일, 인도네시아의 포스트 및 정보 기술 자원 및 장비 총국(SDPPI)은published무선 및 통신 장비에 대한 인증 요구사항 제6조 제2항에 근거한 규정 제16호/2018호를 발행했습니다. 이 통지서에는 인증서가 발효된 지 3년이 지난 후에도 여전히 국내에서 제조, 조립 또는 수입되고 있는 통신 도구 및/또는 장비는 인증서 소지자의 재인증을 받아야 한다고 명시되어 있습니다.
SDPPI 인도네시아는 NOMOR 5 THAUN 2021에 따른 5G 표준인 최신 IMT-2020을 발행했습니다.
인도네시아 5G 오프닝 밴드는
N1 - 1920MHz - 1980MHZ(업링크), 2110MHz - 2170MHz(다운링크)
N3 - 1710MHz - 1785MHz(업링크), 1805MHz - 1880MHz(다운링크)
N3 - 824MHz - 849MHz(업링크), 869MHz - 894MHz(다운링크)
N3 - 880MHz - 915MHz(업링크), 925MHz - 960MHz(다운링크)
N40 - 2300MHZ – 2400MHZ(TDD)
인도네시아어로 된 standard 관련 문서를 첨부하였습니다.
내부에는 모든 기술 요구 사항이 명시되어 있습니다.
호주: 안전
헤어 고데기의 추가 요건 사항이 이제 규제 당국에 의해 제거되었습니다. 즉, 앞으로는 헤어 고데기 인증서는 5년간 유효하고 기존 인증서 갱신 발급 시 이 자격증도 5년간 유효합니다.
새로운 테스트가 필요한 고데기 테스트 보고서의 추가 요구 사항도 제거되었기 때문에 테스트 보고서의 요구 사항은 다른 모든 제품과 동일합니다.
기존 인증서는 영향을 받지 않으며, 이는 2021년 5월부터 받은 새로운 신청 및 갱신에만 적용됩니다.
모든 헤어케어 제품은 EESS/RCM 분류에 따라 신고된 품목이며 레벨 3이므로 헤어 고데기 등 해당 품목에 대한 인증은 여전히 필수 사항입니다.
잠비아: 무선
형식 승인, 지침, 2021년 4월
"이 지침은 전자 통신 장치가 전자 통신 서비스의 일부 또는 목적을 위해 구축 또는 개조된 경우 공화국에서 사용, 공급, 판매, 임대 또는 고용되는 모든 전자 통신 장치에 적용됩니다.
7.1. 당국에 의해 달리 결정되지 않는 한, 제조업체, 배급업체, 수입업체 또는 공급업체는 형식 승인된 전자 통신 장치가 읽기 쉬운 라벨이 부착되어 있는지 확인해야 합니다.
(a) 부록 3에 표시된 대로 당국의 승인을 받아야 합니다.
(b) 형식 승인 절차를 사용하여 전자 통신 장비가 승인된 경우 국가 규제 기관 또는 적합성 평가 기관이 발행합니다.
7.2 제조자, 유통업자, 수입업자 또는 공급업체는 7.1에 언급된 라벨이 항상 눈에 보이고 읽기 쉬운지 확인해야 합니다.
7.3. 라벨은 전자 통신 장비, 포장에 부착되어야 하며 사용 설명서에 포함되어야 합니다.
7.4. 7.3에서 규정한 라벨을 부착할 수 없는 경우, 당국에 의해 승인된 라벨을 서면으로 표시하는 대체 방법을 사용할 수 있습니다.
7.5. 제조자, 유통자, 수입자 또는 공급자는 전자통신장비를 수입, 공급, 판매, 판매 또는 임대하기 전에 반드시 라벨을 부착해야 합니다."
브라질: 통신
작년 12월에 발표된 바와 같이, ANATEL 법 7280이 6월 1일 이후에 시행될 것임을 알려드립니다.
다음은 주요 변경 사항입니다.
1. 제품의 종류에 관계없이 모든 공장 단위에 ISO 9001 인증서가 필요합니다.
2. 새로운 인증 신청의 1년 갱신 주기는 소멸되며, 이러한 제품의 경우 새 갱신 주기는 2년이 됩니다(예: 전화, WWAN 장치, ONT, xDSL 모뎀, 휴대 전화의 배터리 및 충전기, 전원 뱅크 등).;
3. ANATEL은 OLT, 데이터 네트워크 장비(스위치), 멀티플렉스, DWDM 및 기타 장치에 대해 해외에서 수행한 테스트 보고서를 수락합니다. 외국인 실험실은 ILAC 구성원 1명의 인증을 받아야 하며 2년 이내에 시험을 수행해야 합니다.
4. 영구 인증서는 더 이상 존재하지 않으며, 새로운 규칙은 해당 유형의 제품에 대해 3년 갱신 주기가 됩니다.
5. 일부 유형의 제품은 적합성 선언(DoC)에 의해 승인될 수 있습니다. 예: 커넥터, 방송 장비, 위성 스테이션용 RF 파워 앰프, 위성 스테이션 모뎀, 위성 송수신기, XDSL 필터 - 중앙 스플리터 등입니다.
모로코: 안전
제품은 기술 규정의 적용을 받습니다, 목록, 2021년 4월
모로코 산업, 무역 투자 및 디지털 경제부는 모로코의 기술 규제 대상 제품을 나타내는 목록을 발행했습니다. 목록에는 해당 표준과 함께 규제 대상 제품이 포함되어 있습니다.
또한 원산지 관리 품목에 대한 통관 코드와 모로코 도착 시 검사되는 제품을 기재한 리스트도 함께 공개되었습니다.
모로코 규정은 다음을 포함한 광범위한 제품에 적용됩니다.
● 전기 전자제품
● 조명 및 조명등.
● 스위치, 소켓 및 퓨즈
● 배터리
● 플라스틱 포장
● 가구
● 어린이 장난감
2021년 4월 22일, 모로코 산업, 무역 투자 및 디지털 경제부는 모로코 기술 규정의 업데이트된 목록을 발행했으며, 원산지 및 영국 입국 시 검사 대상 제품의 최신 목록을 발행했습니다.
모로코 국경에서의 통제는 이제 다음 제품에 적용됩니다.
● 자동차 예비부품: 타이어, 배터리, 브레이크linings, 유리, 필터 요소, 기계 제어 케이블
● 시공품 : 세라믹타일, 시멘트, 실링시트, 위생용품, 배관입니다. 고정장치, 플라스틱 파이프 등
● 목재 패널
● 가스기기 : 가스히터, 가스온수기
● 작업복 이외의 의류 물품입
● 기타 직물: 담요, 양탄자, 카펫입
● 신발
● 전기제품 : 휴대폰 충전기, 회로차단기
● 위생항목 : 아기 기저귀
한국: 에너지 효율
고효율에너지기자재 보급촉진에 관한 규정 개정, 고시 제2000-103호 - 개정안 - (스마트 LED 조명 적용범위 확대에 관한 사항) 고시 제2021-68호
2021년 4월 20일, 산업통상자원부는 고에너지 효율 장비 촉진 및 공급에 관한 규정 개정안을 발표했습니다.
개정안은 주로 스마트 LED 조명 인증을 받는 제품의 범위를 램프 및 발광체와 같은 단일 조명 장비로 확대합니다.
여기에는 AC 220V, 60Hz에서 유선/무선 통신을 통해 에너지를 절약하기 위해 조광 제어를 할 수 있는 일반 조명용 변환기가 내장된 LED 램프가 포함되며, 통합 LED 광원과 KSC 7651에 지정된 베이스를 적용합니다.
AC 220V, 60Hz에서 유무선 통신을 통해 에너지를 절약하기 위한 조광 제어 기능이 있는 통합 또는 내장 LED 광원을 갖춘 발광 다이오드(Luminaire)도 적용 가능합니다.
개정안은 또 감염병 등의 위험으로 현장 방문이 어려운 경우 공장 비대면 점검이나 감사를 할 수 있는 조항을 신설하고, 개정된 KS 기준에 발광다이오드(LED) 램프의 기준 기준과 용어를 맞춥니다.
이 개정안은 2021년 4월 20일에 발효되었으며 본문의 통합 버전에 포함되어 있습니다.
[영어 원문]
China: CCC
Daily Designation of Compulsory Product Certification Laboratories (First Batch of 2021), Announcement No. 5, 2021
In force (published on Apr 15, 2021)
On 15 April 2021, the Certification and Accreditation Administration of China (CNCA) approved the first batch of designated compulsory product certification laboratories for the year 2021.
The laboratories in this announcement are designated to cover the certification of the following products to the relevant CNCA implementation rules:
Any appeal or complaint regarding this announcement can be submitted to CNCA within 15 working days from the date of publication.
Sierra Leone: wireless
NATCOM Labelling requiremetns
« Consistent with Section 9 (2) of the Electronic Communications Regulations 2020, every supplier, importer, distributor or seller shall, where applicable, ensure that equipment offered for sale or for private use is clearly affixed with the type approval label containing the following:
Therefore label should be affixed on equipment. However if equipment is too small for this label, it could be affixed as below:
The sample of the labelling format is shown below:
TAN: YYYY-PCN-UTAN
TAN= 형식 승인 번호
YYYY=인증년도(4자리 숫자)
PCN= 제품 카테고리 번호(3 자리 숫자)
UTAN= 고유 형식 승인 번호(4자리 숫자)
Indonesia: telecom
Indonesia announces Recertification Obligations for Telecommunication Tools and/or Equipment
On 29 April 2021, the Indonesian Directorate General of Resources and Equipment for Post and Information Technology (SDPPI) published a notice based on Article 6 paragraph (2) of Certification Requirements for Wireless and Telecommunications Equipment, Regulation No. 16/2018. The notice announces that telecommunication tools and/or equipment that are still being made, assembled, or imported in the State after 3 years since their certificate became effective must be re-certified by the certificate holder.
SDPPI Indonesia just publish the latest IMT-2020 which is the 5G Standards under NOMOR 5 TAHUN 2021
The opening band for Indonesia on 5G will be
Attached is the standards softcopy in Indonesia language.
Inside stated all the technical requirements
Australia: safety
The extra requirements for hair straighteners have now been removed by the regulators. This means that from now on, any hair straightener certificate will also be valid for 5 years and when we issue a renewal to an existing certificate, this will also be for 5 years.
The extra requirements for hair straightener test reports requiring new testing have also been removed, so the requirements for the test report will be exactly the same as for all other products.
Existing certificates are not affected and this will only apply to new applications and renewals received from May 2021.
A reminder that any hair care product is a declared item and level 3 under the EESS/RCM classifications, so certification for these items, including hair straighteners, remains mandatory.
Zambia: wireless
Type Approval, Guidelines, April 2021
In force (published on Apr 09, 2021)
"These Guidelines shall apply to any electronic communications apparatus to be used, supplied, sold, offered for sale, leased or hired in the Republic provided the electronic communications apparatus is constructed or adapted for use as part of, or for the purpose of, an electronic communications service.
7.1. Unless otherwise determined by the Authority, a manufacturer, distributor, importer or supplier shall ensure that type approved electronic communications apparatus is affixed with a legible label-
(a) Approved by the Authority as shown in Appendix 3;
(b) Issued by a National Regulatory Authority or a Conformity Assessment Body where the electronic communications apparatus is approved using the type acceptance process.
7.2. A manufacturer, distributor, importer or supplier shall ensure that the label referred to in 7.1 is visible and legible at all times.
7.3. A label shall be affixed on the electronic communications apparatus, the packaging and included in the user manual.
7.4. Where affixing a label as prescribed in 7.3 is not feasible, an alternative method of displaying the label approved by the Authority in writing may be used.
7.5. A manufacturer, distributor, importer or supplier shall ensure that a label is affixed on an electronic communications apparatus before it is imported, supplied, sold, offered for sale or leased."
Brazil: telecom
As announced December last year, we kindly remind you the ANATEL Act 7280 will become in force after June 1st.
Here are the main changes:
Some type of products will be acceptable to approve by Declaration of Conformity (DoC). Examples: Connectors, Broadcasting equipment, RF Power Amplifier for Earth Station, Earth Station Modem, Satellite transceiver, XDSL Filter - Central Splitter and others.
Morocco: safety
Products Subject to Technical Regulations, List, April 2021
The Moroccan Ministry of Industry, Trade Investment and the Digital Economy has issued a list indicating the products that are subject to technical regulations in Morocco. The list contains regulated products, along with their corresponding standards.
Also released are a list specifying which products are controlled at the country of origin with their customs codes, and another showing products that are inspected upon arrival in Morocco.
Moroccan regulation covers a wide range of products including, but not limited to:
On 22 April 2021, the Moroccan Ministry of Industry, Trade Investment and the Digital Economy issued an updated list of Moroccan technical regulations, in addition to an updated list of products that are subject to inspection both in the country of origin and upon arrival into the Kingdom.
Control at the border of Morocco now applies to the following products, among others:
Hygiene items: Baby diapers.
Korea: energy efficiency
South Korea: Regulation on Promotion and Supply of High Energy Efficient Equipment, Notice No. 2000-103 - Amendment - (on expanding the scope of application of smart LED lighting) Notice No. 2021-68
In force (since Apr 20, 2021)
On 20 April 2021, the South Korean Ministry of Trade, Industry and Energy (MOTIE) issued an amendment to the Regulation on Promotion and Supply of High Energy Efficient Equipment.
The amendment primarily expands the scope of products subject to certification of smart LED lighting to include single lighting equipment, such as lamps and luminaires.
These include LED lamps with built-in converter for general lighting that are capable of dimming control for energy saving through wired/wireless communication at AC 220 V, 60 Hz, and apply an integrated LED light source and the base specified in KSC 7651.
Luminaires with integrated or built-in LED light source that are capable of dimming control for energy saving by wired/wireless communication at AC 220 V, 60 Hz are also in scope.
The amendment also establishes provisions that allow non-face-to-face factory inspections or audits in cases where site visits are difficult due to the risk of infectious diseases, etc., and aligns the reference standards and terminology of luminaires and LED lamps with the revised KS standards.
The amendment entered into force on 20 April 2021 and is contained in the consolidated version of the text.
EAEU: RoHs
세관 신고서에 RoHS 적합성 평가 문서, 고시 No 167, 2018 및 기타 - 수정안 - (발광 다이오드 램프에 대한 TN VED EAEU 코드 추가에 관한) 고시 No 33, 2021에 관한 제품 목록
2021년 3월 23일, 유라시아 경제 위원회는 이전 고시를 수정하기 위해 No. 33 고시를 채택했습니다.
이 개정안의 목적은 세관 신고서의 제출과 관련하여 적합성 평가 문서의 제출이 수반되어야 하는 새로운 TN VED EAEU 코드(외국인 경제 활동의 명명법)를 EAEU 제품 목록에 추가하는 것입니다.
업데이트된 제품 목록은 다음 기술 규정과 관련이 있습니다.
이 변경 사항은 발광 다이오드 램프용 code 8539 50 000을 목록에 추가하기 위한 것입니다.
no. 33고시는 2021년 4월 25일부터 시행됩니다.
필리핀: 무선
무선 통신 장비에 대한 허가, 인증서 및 면허의 유효기간 연장, No. 001-03-2021
발효(2021년 3월 26일 이후) 2021년 3월 26일 필리핀 국가전기통신위원회(NTC)는 2021년 3월 22일부터 4월 4일까지 만료되는 NTC 허가, 인증서, 라이센스의 유효 기간을 연장하는 각서 명령을 발행했습니다.
기존의 모든 무선 사업자, (제조업체/딜러점/소매점/리셀러/서비스 센터 등) 는NCT가 발행한 무선 통신 장비, 네트워크 및 시설, 정부 또는 민간, 고정 및 육상 이동, 아마추어 항공, 해상, 위성, 특수 서비스, 방송 등 다양한 무선 서비스 운영을 허가, 인증서 및 면허를 보유하고 있으며, 2021년 3월 22일과 4월 4일 이내에 만료되는 무선 장비 및 장치에 대해 발행된 인증서는 2021년 4월 4일부터 60일간 계속 유효합니다.
허가 및 증명서의 보유자에게는 2021년 4월 4일부터 60일 이내에 허가, 증명서 또는 면허증의 갱신을 신청할 수 있습니다.
이 공지는 NTC의 웹사이트에 게시된 날짜인 2021년 3월 26일에 발효되었습니다.
브라질: 통신
3,300MHz에서 3,600MHz 대역에 대한 대역 주파수 할당 및 사용 조건, 고시 711호, 2019년 5월 - 수정 - (24GHz 대역 사용 시) 고시 742/2021호
2021년 3월 2일, 브라질 정보통신청(ANATEL)은 통신 서비스의 주파수 할당 및 사용 조건을 설정하는 고시 711/2019호를 개정하기 위한 고시 742/2021호를 발행했습니다.
해당 고시는 부록에서 24,25 GHz ~ 27,9 GHz의 무선 주파수 대역 사용 조건을 승인합니다.
24.25GHz ~ 27.90GHz를 사용하는 시스템은 시간 분할 이중화(TDD)를 사용해야 합니다. 기지국 단자의 유효 동위원소 복사 전력(EIRP)은 양질의 적절한 신뢰성으로 서비스를 수행하는 데 필요한 최소 전력이어야 합니다. 방송국의 전력 제한은 무선 주파수 주파수 사용 관리를 담당하는 감독법에서 승인한 기술 요건을 통해 설정되며, 이는 발송 전 공공 협의 절차에 제출됩니다. 또한 기술 요구사항은 대역 외 및 허위 배출에 대한 한계와 방송국 운영에 대한 추가 기술 조건을 규정합니다.
해당 고시는 2021년 4월 1일부터 시행됩니다.
Publication References - DOU 02.03.2021
브라질: 안전 및 에너지 효율
원심 스핀 드라이어의 적합성 평가 및 기술 요구 사항을 승인합니다(Portaria No. 144, 2021).
승인됨(2021년 4월 1일부터 시행)
2021년 3월 25일, 브라질 국립도량형표준화산업품질연구소(INMETRO/CONMETRO)는 브라질 시장에서 제조, 수입 또는 유통되는 원심복 건조기에 의해 적합성 평가 및 기술 요건을 확립하는 기술 품질 규정을 승인하기 위해 고시 144호를 발행했습니다.
제5조는 원심 건조기에 대한 생산의 기업의 의무와 책임을 강조하고 국가 제조업체와 수입업체가 이 규칙에 따라 제품을 제조하고 사용할 수 있도록 해야 한다고 고지 하였고 제품의 무결성과 제품의 필수 표시 라벨을 따라야 합니다.
이 제품에는 공급업체가 첨부한 다른 정보에 의해 시각화가 방해받지 않고 소비자가 볼 수 있는 ENCE, 국가 에너지 절약 라벨이 부착되어 있어야 합니다.
온라인 상거래의 경우, 사이트 관리자는 ENCE 및/또는 제품이 제공되거나 표시되는 모든 페이지에 텍스트 형식으로 포함된 정보를 제품 모델의 이미지 또는 식별과 함께 표면적이고 명확하고 분명하게 제공해야 합니다.
부록 I 항목 5에 따르면, 브라질 국내 시장에서 구입할 수 있는 모든 원심복 건조기는 제품 및 포장에 영구히 표시해야 하며, 포르투갈어로 된 최소 정보는 다음과 같습니다.
∘ 국내 제조자 또는 수입자의 성명, 상호 및 납세신분증(CNPJ 또는 CPF)입니다.
∘ 등록을 보유하고 있는 공급업체의 명칭, 상호 및 재정확인(CNPJ 또는 CPF)
∘ 등록번호의 적합성 확인Identification Seal;
∘ 제품의 상호
∙ 제조일(일, 월, 년, 이 순)
∙ 제품의 추적가능성이 있는 배치의 식별 또는 그 밖의 식별 표시
∙ 원산지
∘ 상품 브랜드, 모델 및 버전 식별을 위한 상용 바코드
항목 6.1에 따라, 기기가 설계되는 건조 재료의 질량에 관한 정보 및 추출기가 압축으로 작동할 때 발생할 수 있는 잠재적 위험에 대한 경고를 포함하여 기기를 안전하게 사용할 수 있도록 사용 지침을 장치와 함께 제공해야 합니다.
공급업체는 또한 장치의 원심분리 용량, 주기 시간, 전기 소비량, 원심분리 효율 및 에너지 효율 측면에서 장치의 성능을 선언해야 합니다.
제조, 수입, 유통 및 시판되는 원심건조기는 인증을 통해 적합성 평가에 강제 제출되어야 하며, 인증제품에 대한 적합성 확인 표시를 사용할 수 있고 국내 시장에서 사용할 수 있는Inmetro에도 등록되어야 합니다. 적합성 평가 기준은 부속문서 II에 자세히 나와 있습니다.
이 고시는 2021년 4월 1일부터 시행됩니다.
베트남: 라벨링
Circular No. 10/2020/TT-BKHCN, 코드 및 바코드 사용을 위한 구현 조치입니다.
베트남 과학 산업부가 2020년 12월 30일에 발행한 본 고시에는 제품, 서비스 및 조직의 코드 및 바코드 사용과 관련된 제품 및 제품 품질 법령 132/2008/ND-CP의 규정을 이행하기 위한 세부 사항이 나와 있습니다.
본 고시에서는 코드와 바코드를 사용하는 개인 및 조직의 의무와 코드 및 바코드 사용 권리 인증서를 발급하는 절차를 설명합니다.
코드와 바코드의 귀속은 제품 및 상품 품질의 관리와 관련된 법령 132/2008/ND-CP의 규정을 준수할 수 있습니다.
신청자는 표준도량형품질종합부 원스톱샵 부서 또는 과학기술부 국가공무원 포털 온라인 데이터베이스에 등록하여 제출하는 신청자에 한하여 증명서를 교부할 수 있습니다.
코드와 바코드는 국제 표준 ISO/TEC 15426-1 및 ISO/IEC 15426-2의 준수를 보장하기 위해 제품과 제품 포장에 인쇄되어야 합니다.
또한 본 고시에서는 2018년 7월 1일 이전에 인증서가 발급된 조직이나 개인은 본 회보의 규정에 따라 2024년 4월 1일까지 새 인증서를 등록해야 합니다.
본 고시는 2021년 4월 1일부터 시행될 예정입니다.
이스라엘: 안전
가정용 및 유사 전기제품에 대한 국가 의무 표준을 승인합니다(고시 번호 5721, 2021).
승인됨(2021년 7월 10일부터 시행)
이스라엘 경제 산업 장관이 2021년 4월 11일 발행한 이 통지서에는 국가 의무 표준으로 간주해야 할 17가지 표준 목록이 나와 있습니다.
이러한 표준은 다음 참조에 따라 2021년 4월 15일 세계무역기구(WTO)에 통보되었습니다.
상기 기준은 이스라엘 관보에 게재된 지 90일 후인 2021년 7월 10일부터 시행될 예정입니다.
Publication References - Official Gazette No. 9314, 11.04.2021, p. 2918
중국: 안전
필수 제품 인증 단위 및 절차의 통합, Notice No.2, 2021
시행 중(2021년 3월 22일 발행)
2021년 3월 18일, 중국 인증 및 인증 관리국(CNCA)은 필수 제품 인증 단위 및 절차 통합에 대한 통지를 승인했습니다.
본 고시는 필수제품 인증을 위해 지정된 인증기관에서 다루어지며, 절차를 단순화하고 인증 신청 시간과 비용을 절감하는 것을 목적으로 합니다.
인증서 보유자는 CCC 인증서를 결합하도록 선택할 수 있습니다. 인증서의 변경 절차는 간단하며, 제품 안전성에 영향을 미치지 않는 변경 신고는 필요하지 않습니다.
말레이시아: 안전
SIRIM은 SIRIM TRUSTED Mark Scheme(STMS)라는 새로운Scheme을 시작했습니다. 이것은 e-Commerce 플랫폼에서 제품을 판매 및/또는 공급하는 신뢰할 수 있는 회사에 수여/인정/인증하기 위한 자발적인 인증 제도입니다(이Scheme은 e-Commerce Platform의 상점 전용).
다음은 STMS에 따라 인증된 마크입니다.
이 STMS를 받으면 얻을 수 있는 주요 이점은 다음과 같습니다.
1. 구매자가 Trusted Mark(신뢰할 수 있는 마크)를 사용하여 판매자로부터 구매할 수 있는 안정성
2. 본 제품이 정품임을 증명합니다(종류 승인 인증 제도를 거치면서).
3. 브랜드 인지도를 높이고 병행 수입업체로부터 이점을 얻습니다.
2021년 5월 20일에 이 계획의 공식 런칭이 있을 예정이고, 광고 효과로 인해 귀사의 브랜드와 회사가 개선될 수도 있습니다.
아르헨티나: 안전
고시 280/2021호 할로겐 램프 수입에 대한 예외 획득 절차
시행 중(2021년 3월 31일 이후)
2021년 3월 30일, 아르헨티나 생산개발부는 주택용 백열등 금지 예외에 관한 법령 제 996/2020호의 규정을 승인하기 위해 고시 제 280호/2021호를 채택했습니다.
해당 고시는 할로겐 램프 수입 예외를 인정하기 위한 절차에 관한 부속 문서 I에 따라 제 996/2020호의 규정을 승인합니다.
이 절차에 따라 자체 사용 및 상용화를 위해 취득한 할로겐 램프는 반드시 영 제 996/2020호 부록 1에 따라 사용해야 합니다.
또한 이 고시의 부속서 II는 할로겐 램프 사용에 대한 진술서(확인된 서면 진술서)의 모델을 제공합니다.
이 고시는 2021년 3월 31일에 발효되었습니다.
Publication References - Boletin Official No. 34.621, 31.03.2021, pp.37-38
콜롬비아 : 안전
최종 사용 전기 및 연료 가스 장비 (RETIQ)의 라벨링에 대한 기술 규정, 고시 41012/2015-수정 사항-(레이블, 테스트 등)의 라벨 표시를 위한 기술 규정 고시 제40099호, 2021
2021 년 3 월 26 일 콜롬비아 에너지부는 최종 사용 전기 및 연료 가스 장비 (RETIQ) 라벨링에 대한 기술 규정에 대한 고시 No 41012/2015를 수정하기 위해 고시 No 40099를 승인했습니다.
RETIQ의 구현을 개선하기 위해 이 개정안에는 정밀형 에어컨 및 다중 배출 시스템 콘덴서에 대한 라벨의 예제가 포함되어 있으며, 또한 최종 라벨의 모양을 보여주기 위해 2020년 고시 40247에 포함된 다수의 라벨 예제를 업데이트 합니다.
이 개정안은 규제 범위에 최초로 포함 된 내용의 제 22 조의 다섯 번째 문단을 수정합니다. 새 장비가 추가되는 경우 텍스트에 달리 명시되지 않는 한 장비가 준수 할 수 있도록 1 년의 과도기 기간이 제공됩니다.
표준 ISO 16358-1:2013의 적용은 에너지부가 가능한 대안들에 대한 연구를 수행하고 이 표준의 올바른 실행을 위해 기술 도구를 사용할 수 있다는 것을 보장할 때까지 보류됩니다. 본 고시는 제8조에 규정된 냉각 용량 > 10,540 와트 및 최대 17,580 와트 까지에 대한 요건 발효를 보류합니다.
에너지부는 또한 모터 펌핑 장비가 범위에 포함되어야하는지 여부를 확인하기 위해 규제 영향 분석을 준비해야합니다.
이 개정안은 2021 년 3 월 26 일에 발효되었습니다.
사우디: 무선
상업 및 혁신적 사용에 대한 무선 주파수 전망 2021 – 2023, 계획, 2021년 3월
2021년 3월 31일에 출판되었습니다.
CITC는 다음 두 가지 대역에서 향후 5년간 상당한 라이센스 면제 할당이 이루어질 것으로 예상하고 있습니다.
- 5925 – 7125 MHz
- 66-71GHz
각 밴드를 출시할 준비가 되면 CITC는 우리의 제안에 대한 상세한 문서를 발행하고, 적절한 경우 협의할 것입니다. 또한 섹션 4.9에서 설명한 대로 V2X에 대해 5.9 GHz의 라이센스 면제 주파수를 사용할 수 있으며, 2022년에는 이 대역에서 라이센스 면제 사용에 대해 상담할 예정입니다. 또한 기존 대역의 추가 할당과 잠재적인 규제 변경이 있을 수 있습니다.
CITC는 전체 5925–7125 MHz 대역의 면허를 면제하는 것을 염두에 두고 있지만, Region 1 에서 가능한 IMT 식별을 위해 밴드의 부문이 고려되고 있다는 점을 고려할 때, 그들은 우리의 결정을 마무리 짓기 전에 관련 이해당사자들과 상의할 것입니다.
CITC는 2021년에 66~71 GHz 대역을 라이센스 면제 기준으로 사용할 수 있도록 할 예정입니다. 66 – 71 GHz 대역은 WRC-19에서 IMT용으로 식별되었습니다. 현재 무면허 5G와 Wi-Gig 시스템 간의 잠재적 공존 문제를 결정하기 위한 연구가 진행 중이지만, 이 대역의 라이센스 면제 공표는 이러한 기술 및 기타 무선 기술의 배치를 위한 기반을 마련할 것입니다. 또한 특히 철도 승객에게 광대역 연결을 제공하기 위해 교통 부문의 무선 시스템을 개선할 수 있는 기회가 있습니다. 미국과 같은 많은 다른 나라들은 현재 66~71GHz 대역을 무면허 서비스에 사용하고 있습니다.
사우디아라비아 CITC는 Wi-Fi 6e용 6GHz 대역 개방 계획을 발표했습니다.
통신 및 정보 기술 위원회(CITC)는 유럽, 아프리카 및 중동에서 Wi-Fi를 위해 6GHz 주파수 대역을 모두 사용할 수 있게 하는 첫 번째 국가가 될 것이라고 발표했습니다. 이는 이제 라우터가 새로운 세대의 Wi-Fi 네트워크에 사용할 수 있는 개방된 전파가 150% 더 많다는 것을 의미합니다. 사우디 아라비아는 WiFi6e용 무선 주파수 1,200MHz를 할당함으로써, 이제 2,035MHz의 주파수를 새로운 세대의 WiFi 및 기타 라이센스 면제 기술에 사용할 수 있게 되었습니다. 이는 전 세계 어느 나라보다 많은 수치입니다. 해당 결정은 원격의료, 학교 교육, 원격 근무와 같은 많은 사용 사례를 가진 사우디 아라비아의 사용자들을 위한 많은 응용 프로그램으로 향후 10년간의 와이파이 발전을 위한 발판을 마련했습니다.
남아프리카: 안전
남아프리카의 국가 규격 규제 기관(NRCS)은 2021년 4월 1일 SAN/IEC 62368 테스트 보고서를 수락할 것이라고 발표했습니다. 이전에는 SANS/IEC 60950 또는 SANS/IEC 60065 테스트 보고서가 필요했습니다. VC 8055의 수정된 버전이 곧 출시되어 공식적으로 업데이트를 확인할 것으로 예상되지만, 그 전까지는 IEC 62368 보고서를 NRCS 제출에 사용할 수 있습니다. LoA는 시험 보고서에 있는 IEC 62368 또는 IEC 60950/60065와 함께 발행할 수 있습니다.
태국: 안전
태국 산업 표준 협회(TISI)는 오디오, 비디오 및 유사한 전자 장치에 대한 새로운 안전 표준 TIS 1195-2561을 발표했습니다. 새 표준은 기존 표준 TIS 1195-2536을 대체합니다. 새 표준은 2021년 8월 24일부터 시행될 것으로 예상됩니다.
[영어 원문]
EAEU: RoHs
List of Products in Respect of which a Customs Declaration is Accompanied by RoHS Conformity Assessment Document, Decision No. 167, 2018 and Others - Amendment - (on adding TN VED EAEU code for light-emitting diode lamps) Decision No. 33, 2021
Approved (coming into force on Apr 25, 2021)
On 23 March 2021, the Eurasian Economic Commission adopted Decision No. 33 to amend certain Decisions of the Board of the Eurasian Economic Commission.
The aim of this amendment is to add a new TN VED EAEU code (Nomenclature of Foreign Economic Activity) to the EAEU lists of products, in respect of which the submission of a customs declaration must be accompanied by the submission of a conformity assessment document.
The updated lists of products relate to the following technical regulations:
The changes provide for the addition of the code 8539 50 000 for light-emitting diode lamps to the lists.
Decision No. 33 enters into force on 25 April 2021.
Philippines: wireless
Extension of Validity of Permits, Certificates and Licenses for Radio Communication Equipment, Memorandum Order No. 001-03-2021
In force (since Mar 26, 2021) On 26 March 2021, Philippines National Telecommunications Commissions (NTC) issued a Memorandum Order to extend the validity of NTC permits, certificates and licenses which are due to expire between 22 March 2021 and 4 April 2021.
All existing radio operator permits, certificates and licenses to operate radio communication equipment, networks and facilities, government or private in various radio services such as but not limited to fixed and land mobile, amateur aeronautical, maritime, satellite, special services, broadcasts, including permits and accreditations issued to manufacturers/ dealers/ suppliers/ retailers/ resellers/ service centres for radio equipment and devices issued by NCT and expiring within 22 March 2021 and 4 April 2021 shall continue to be valid for sixty (60) days from 4 April 2021.
Holders of permits and certificates shall be given 60 days from 4 April 2021 to file for the renewal of their permits, certificates or licenses.
This Memorandum came into force on 26 March 2021, the date of its publication on the NTC's website.
Brazil: telecom
Band Frequency Allocation and Conditions of Use for the 3,300 MHz to 3,600 MHz Bands, Resolution No. 711, May 2019 - Amendment - (on use of the 24 GHz band) Resolution No 742/2021
In force (since Apr 01, 2021)
On 2 March 2021, Brazil National Telecommunications Agency (ANATEL) published Resolution No 742/2021 to amend Resolution No. 711/2019 which establishes frequency allocations and conditions of use for telecommunication services.
The Resolution approves the Conditions of Use of the Band of Radio Frequencies from 24,25 GHz to 27,9 GHz, in the Annex.
Systems using the 24.25 GHz to 27.90 GHz must employ time division duplexing (TDD). The effective isotropically radiated power (EIRP) of a base station terminal must be the minimum necessary to carry out the service with good quality and adequate reliability. The power limits of stations will be established by means of Technical Requirements approved by the Superintendence Act responsible for the administration of the use of the radio frequency spectrum, which will be submitted to the Public Consultation procedure before its dispatch. The technical requirements will also establish the limits for out-of-band and spurious emissions, as well as additional technical conditions for the operation of the stations.
The Resolution will enter into force on 1st April 2021.
Brazil: safety and energy efficiency
Approving Conformity Assessment and Technical Requirements for Centrifugal Spin Dryers, Portaria No. 144, 2021
Approved (coming into force on Apr 01, 2021)
On 25 March 2021, Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 144 to approve the Technical Quality Regulation establishing the conformity assessment and technical requirements to be met by centrifugal clothes dryers that are manufactured, imported, sold or distributed for the Brazilian market.
Article 5 underlines the obligations and responsibilities of entities in the production chain for centrifugal dryers and determines that the national manufacturer and the importer must manufacture and make appliances available in accordance with this Regulation, with other entities in the production and supply chain, physical or virtual, obliged to maintain the integrity of the product and mandatory markings.
The products must bear the ENCE, the National Energy Conservation Label, visible to the consumer, without its visualisation being obstructed by any other information attached by the suppliers.
As for virtual commerce, the site administrator must provide the ENCE and/or the information contained therein in text format on all the pages where the product is offered or displayed, in an ostensible, clear and unequivocal manner together with the image or identification of the product model.
According to Annex I Item 5 all centrifugal clothes dryers available on the domestic market must be permanently marked, both on the product and on the packaging, with the minimum information in Portuguese, including:
Per item 6.1, instructions for use must be provided with the appliance so that it can be used safely, including information regarding the mass of dry material for which the appliance is designed and alerts to potential dangers present when the extractors operate by compression.
Suppliers are also required to declare the performance of the device in terms of its centrifugation capacity, cycle time, electricity consumption, centrifugation efficiency and energy efficiency.
Centrifugal dryers manufactured, imported, distributed and marketed shall be compulsorily submitted to conformity assessment through certification, and shall also be registered with Inmetro, which will allow the use of the Conformity Identification Mark on certified products and their availability on the domestic market. The criteria for conformity assessment are detailed in Annex II.
This Portaria will enter into force 01 April 2021.
Vietnam: labelling
Implementation Measures for the Use of Codes and Bar Codes, Circular No. 10/2020/TT-BKHCN
In force (since Apr 01, 2021)
This Circular, issued by the Vietnamese Ministry of Science and Industry on 30 December 2020, provides details on measures to implement the provisions of the Product and Goods Quality Decree No. 132/2008/ND-CP relating to the use of codes and barcodes by products, services and organisations.
This Circular describes the obligations of individuals and organisations that use codes and barcodes and the procedure for issuing Code and Barcode Use Right Certificates.
The attribution of codes and barcodes is subject to compliance with the provisions of Decree No. 132/2008/ND-CP relating to the control of product and goods quality.
Certificates may only be granted to applicants who register and submit the requested information to the one-stop-shop department of the General Department of Standards, Metrology and Quality or the online database of the National Public Service Portal of the Ministry of Science and Technology.
Code and barcodes shall be printed on the product and its packaging to ensure compliance with International standards ISO/TEC 15426-1 and ISO/IEC 15426-2.
The Circular further provides that organisations or individuals whose certificates were issued before 1 July 2018 have until 1 April 2024 to register for a new certificate in accordance with the provisions of this Circular.
This Circular is scheduled to enter into force on 1 April 2021.
Israel: safety
Approving National Mandatory Standards on Household and Similar Electrical Appliances, Notice No. 5721, 2021
Approved (coming into force on Jul 10, 2021)
This Notice issued by the Israeli Minister of Economy and Industry on 11 April 2021 provides a list of seventeen standards to be considered as national mandatory standards.
These standards were notified to the World Trade Organization on 15 April 2021 under the following references:
The above standards are scheduled to enter into force on 10 July 2021, 90 days after their publication in the Official Gazette of Israel.
China: safety
Integration of Compulsory Product Certification Units and Procedures, Notice No. 2, 2021
In force (published on Mar 22, 2021)
On 18 March 2021, the Certification and Accreditation Administration of China (CNCA) approved a notice on integrating compulsory product certification units and procedures.
This notice, addressed to designated certification bodies for compulsory product certification, aims to simplify procedures and reduce the time and cost of applying for certification.
Certificate holders can choose to combine CCC certificates. The procedures for making changes to certificates shall be simplified, and the declaration of changes which do not affect product safety is not required.
Malaysia: safety
SIRIM had launched a new Scheme , named SIRIM TRUSTED MARK SCHEME (STMS)
This is a voluntary certification scheme to award/recognize/certify the Trusted Company that sell and/or supply product on e-Commerce Platform ( this scheme only for Shops in e-Commerce Platform )
Below are the Marking that will be assign to the one certified under STMS
Main Benefits of getting this STMS are
There will be official launching of this scheme on 20th May 2021 and the advertisement effect might also improve your branding and company.
Argentina: safety
Procedure for Obtaining Exception to Import Halogen Lamps, Resolution No. 280/2021
In force (since Mar 31, 2021)
On 30 March 2021, Argentine Ministry of Productive Development adopted Resolution No. 280/2021 to approve the regulation of Decree No. 996/2020 with regard to the exemptions of the ban on residential incandescent lamps.
The Resolution approves the regulation of Decree No. 996/2020 in accordance with Annex I regarding the process for obtaining the exception to import the halogen lamps.
Based on this procedure, the halogen lamps that are acquired both for own use, as well as for their commercialization, must be used in accordance with Annex of Article 1 of Decree No. 996/2020.
In addition, Annex II to this Resolution provides a model of an affidavit (verified written statement) of use of halogen lamps.
This Resolution entered into force on 31 March 2021.
Colombia: safety
Technical Regulation for Labelling of End-Use Electrical and Fuel Gas Equipment (RETIQ), Resolution 41012/2015 - Amendment - (on examples of labels, testing etc.) Resolution No. 40099, 2021
In force (since Mar 26, 2021)
On 26 March 2021, Colombian Ministry of Mines and Energy approved Resolution No 40099 to amend Resolution No 41012/2015 on Technical Regulation for Labelling of End-Use Electrical and Fuel Gas Equipment (RETIQ).
In order to improve the implementation of the RETIQ, this amendment includes examples of labels for precision-type air conditioners and for multiple outlet system condensers and, also, updates a number of label examples included in the Resolution 40247 of 2020 to show how the final label would look.
This amends the fifth paragraph of article 22 on the transitional nature of the entry into force of equipment included for the first time in the regulation regulatory scope. It states that where new equipment is added, a transitional period of one year will be provided in order for the equipment to comply unless otherwise stated in the text.
The application of Standard ISO 16358-1 :2013 as a mandatory standard for testing the sound pressure level in air conditioners is suspended until the Ministry carries out a study on possible alternatives and until it is guarantees that technical tools are available for the correct implementation of this standard. This amendment suspends the entry into force of the requirements in Article 8 for Air Conditioner with Cooling Capacity > 10,540 and up to 17,580 watts.
The Ministry must also prepare a regulatory impact analysis to establish whether motor pumping equipment should be included in the scope.
This amendment entered into force on 26 March 2021.
Saudi Arabia: wireless
Radio Spectrum Outlook for Commercial and Innovative Use 2021 – 2023, Plan, March 2021
Published on Mar 31, 2021
CITC anticipates significant license-exempt allocations over the next 5 years in the following two bands:
When they are ready to release each band, CITC will issue detailed documentation on our proposals and consult if appropriate. They may also make available license-exempt spectrum for V2X in 5.9 GHz as discussed in Section 4.9, and will consult on licence-exempt use in this band in 2022. There may also be further allocations and potential changes to regulations in existing bands.
CITC is minded to make the entire 5925 – 7125 MHz band license-exempt, but given that segments of the band are considered for a possible IMT identification in Region 1, they will consult with relevant stakeholders before finalizing our decision.
CITC will make the 66 – 71 GHz band available on a license-exempt basis in 2021. The 66 – 71 GHz band was identified for IMT at WRC-19. Studies are currently underway to determine potential co-existence issues between unlicensed 5G and Wi-Gig systems, but a license-exempt release of this band would pave the way for the deployment of these and other wireless technologies. There is also an opportunity to enhance wireless systems in the transportation sector, particularly for providing broadband connectivity to rail passengers. Many other countries such as the US currently use the 66 – 71 GHz band for unlicensed services.
KSA: wireless
Saudi Arabia CITC announces plan to open the 6 GHz band for Wi-Fi 6e
The Communications and Information Technology Commission (CITC) announced that it will be the first country in Europe, Africa and Middle East to make the full 6 GHz frequency band available for Wi-Fi use. That means there are now 150% more open airwaves that routers can use for the new generation of Wi-Fi network. By allocating 1,200 MHz of the radio spectrum for the WiFi6e, Saudi Arabia has now made 2,035 MHz of spectrum available for new generation of WiFi and other license-exempt technologies — more than any country in the world. The decision set the stage for the next decade of Wi-Fi advancements, with many applications for users in Saudi Arabia with many use cases such as telemedicine, schooling, and remote working.
South Africa: safety
The National Regulator for Compulsory Specifications (NRCS) in South Africa announced on April 1, 2021 that they will be accepting SANS/IEC 62368 test reports. Previously SANS/IEC 60950 or SANS/IEC 60065 test reports were required. We expect an amended version of VC 8055 to be released shortly to officially confirm the update, but until then, we can use IEC 62368 reports for NRCS submissions. LoA can be issued with either IEC 62368 or IEC 60950/60065 which is in the test report.
Thailand: safety
The Thai Industrial Standards Institute (TISI) issued a new safety standard TIS 1195-2561 for audio, video and similar electronic apparatus. The new standard will replace the existing standard TIS 1195-2536. The new standard is expected to come into effect on August 24, 2021.
인도: 안전
BIS는 이해관계자들의 요청을 들어 V단계 제품의 의무 등록 시행일을 2021년 10월 1일로 연장했습니다. 이는 일시적인 구제를 의미하며 업계가 CRS 명령을 준수할 수 있는 더 많은 시간을 의미합니다 (BIS에 의무적인 현지 테스트 및 등록). 기존 "2012년 전자 및 IT 물품(필수 등록) 고시"의 5단계는 2021년 4월 1일부터 시행되었습니다.
2021년 10월 1일까지 연장되는 제품은 다음과 같습니다.
· 무선 마이크
· 디지털 카메라
· 비디오 카메라
· 웹캠(완제품)
· 스마트 스피커(디스플레이 포함 및 미포함)
· LED 제품의 조광기
· 블루투스 스피커
말레이시아: 에너지 효율
말레이시아 Suruhanjaya Tenaga(ST)는 2021년 3월 1일 냉동고에 대한 최소 에너지 성능 표준(MEPS)의 시행을 발표했습니다.
이 요건은 2021년 3월 1일까지 유예기간 1년으로 시행됩니다.
2022년 3월 1일까지 모든 냉동고는 이 요구 사항을 준수해야 합니다.
ST의 통지서를 첨부하였습니다
태국: 무선
NBTC는 다음 표준을 2021년 3월 11일에 발표했습니다.
- NBTC TS 1038-2564 무인 항공 차량 - 일반 용도 사용
발효일은 2021년 3월 12일이 될 것입니다.
본 표준은 추가 정보의 경우 24.05-24.25GHz의 추가 주파수를 클래스 A 형식 승인 하에 UAV에서 사용할 수 있도록 하기 위한 것입니다.
허용된 전력은 100 MW.I.R.P를 초과하지 않아야 합니다.
이전에 발표된 433.05-434.79MHz, 2400-2500MHz, 5725-5850MHz 주파수의 경우 변경되지 않으며 Sdoc에 따라 승인이 필요합니다.
태국어로 된 공식발표를 첨부합니다.
이스라엘: 무선
무선 전신 고시 새 버전, 고시 5732-1972 - 개정 - (준수증명서의 적용을 받는 면허 면제 장치에 대하여) 규정 5721-2021
시행 중입니다(2021년 3월 3일 이후).
2021년 3월 3일, 이스라엘 통신부는 장관이 2018년 10월 31일 개인 수입용 다양한 유형의 무선 장치에 대해 설정한 면제를 연장하는 규정 5761-2021을 승인했으며, 이에 따라 해당 장치도 상업 수입에서 면허를 면제받기로 결정했습니다. 정부 고시 3424입니다. 면제 장치는 라이센스가 필요하지 않으며, 대신 수입업자 또는 제조업체에서 적합성 인증서를 받아야 합니다.
다음 장치는 라이센스에서 제외됩니다.
● 최대 e.i.r.p.가 100mW 미만인 2,400~2,483.5MHz 대역의 블루투스 3 기술을 사용하는 무선 장치
● 안테나 내장형 안테나를 포함한 ANT / ANT + 기술
● 위성 전송 기술;
● 1,000 GHz ~ 3,000 GHz 사이의 적외선 주파수 영역에서 작동하며, 전송 전력이 200 MIRW를 초과하지 않는 장치
● 마우스와 키보드 등 컴퓨터 주변기기;
●태블릿, 데스크톱, PC.
● 진공청소기;
● 휴대전화용 예비부품;
● TV용 셋톱 박스 수신기;
● AM/DAB/FM 기술을 이용한 공중파 수신용 라디오 수신기
● 휴대용 배터리로 작동하는 금속탐지기
규정 제7절에는 2021년 8월 31일까지 "가정용 스마트 회로 차단기"가 규정 제3조에 따라 면제된다고 명시되어 있습니다.
이 규정은 1982년 이스라엘: 무선 전신 명령 (조례의 비적용성) (2번)을 폐지시키며, 이스라엘 법 규정에 따라 2021년 3월 3일부터 시행되었습니다.
사우디: 안전
SASO: 여러 제품에 대해 IECEE 인증서가 필수 사항이 됩니다.
2021년 3월 10일, 사우디 표준화, 도량형 및 품질 SASO는 2021년 7월 1일부터 다수의 전기 기술 제품에 대한 IECEE 국가 공인 인증서 취득이 의무화된다고 발표했습니다.
본 발표에서 다루는 제품은 다음과 같습니다.
●물보일러 및 주전자
● 모든 종류의 커피 메이커
● 가정용 전기 프라이어
● 5mph 이하의 전기 펌프
● 전원 케이블
● 비디오 게임 콘솔 및 컨트롤러
● 무선 헤드셋
● 충전기 및 기타 부속품
SASO는 이 요건이 위조 장치 및 장비로부터 시장을 보호하고 표준을 준수하지 않는 수입 제품으로부터 소비자를 보호한다는 것을 명확히 합니다. 또한 이들 제품이 야기할 수 있는 사고를 줄이고, 반복적인 검사와 테스트 없이도 세관 항구를 통한 물품의 입항을 용이하게 하는 것을 목표로 하고 있습니다.
모로코: 안전
제품은 기술 규정의 적용을 받습니다, List, 2021년 1월
2021년 1월 29일에 출판되었습니다.
모로코 산업, 무역 투자 및 디지털 경제부는 모로코의 기술 규제 대상 제품을 나타내는 목록을 발행했습니다. 목록에는 해당 규격과 함께 규제 대상 제품이 포함되어 있으며, 2021년 1월 말에 업데이트되었습니다.
또한 원산지 관리 품목에 대한 통관 코드와 모로코 도착 시 검사되는 제품을 기재한 리스트도 함께 공개되었습니다.
모로코 규정은 다음을 포함한 광범위한 제품에 적용됩니다.
●전기 전자제품
● 조명 및 조명
● 스위치, 소켓 및 퓨즈
● 배터리
●플라스틱 포장
● 가구
● 어린이 장난감
유첨의 규제 대상 제품 목록 2개를 확인 부탁드립니다.
브라질: 통신
3월 9일, ANATEL은 1477년 법률안을 발표했습니다. 이 새로운 고시는 3,300 MHz ~ 3,700 MHz 범위의 주파수 범위에서 작동하는 장치에 의한 주파수 사용에 대한 기술적 요건을 규정합니다.
새로운 고시는 브라질에서 5G NR 대역 n78을 테스트하고 승인하는 것을 가능하게 합니다. 이 고시는 2021년 4월 1일부터 시행됩니다.
참조는 별첨을 참조하십시오.
브라질: 무선
제한(저전력) 무선통신장비에 대한 기술요건 및 시험절차를 승인합니다. 2017년 12월 고시 No. 14448 - 개정안 - (5.925–7.125 MHz 대역(6GHz 광대역)법 1306/2021의 장비 운용요건에 대하여)
시행 중입니다(2021년 3월 1일 이후).
2021년 3월 1일, 브라질 국립 전기 통신청(ANATEL)은 (저전력) 무선 통신 장비에 대한 기술 요건 및 테스트 절차를 승인하기 위해 공공 고시 No. 82/202020에 의해 시작된 법률 No 1306/2021을 발행했습니다.
이 고시는 5.925–7.125 MHz 대역으로 운영되는 지역 통신망용 광대역 무선 접속 시스템의 기술 요건을 개정합니다. 이 고시는 또한 정의를 개정하기 위해 2017년 고시 No. 14448/2017의 부속문서 1을 개정합니다.
고시 제1306호/2021호는 2021년 3월 1일부터 시행되었습니다.
필리핀: 안전
필수 인증 대상 제품 및 시스템 목록, 고시 21-05, 2021
시행 중입니다. (2021년 1월 25일 이후)
필리핀 산업통상부 표준국(DTI-BPS)은 의무 인증 하에 업데이트된 제품 목록을 고시 No. 21-05에 발표했습니다.
DTI-BPS는 다음과 같은 세 그룹으로 분류된 목록을 업데이트했습니다.
● 전기 및 전자 제품;
●기계/건축 및 시공자재 및 기타 사항입니다.
● 화학 및 기타 소비자 제품 및 시스템.
해당 제품에는 다음이 포함됩니다.
● 전기 그릴
● 선풍기
● 전기 오븐
● 터보 브로일러
● 인덕션 쿠커
● 세탁기
● 스핀 추출기
● 냉장고
● 에어컨
● 전기 쥬스
● 전기식 믹서기
● 전기 식품 처리기
● 전기 주전자
● 전기 압력식 쿠커
● 전기 멀티쿠커
● 텔레비전 수상기
● 백열등입니다.
● 자체 밸러스트 LED 램프
● 회로 차단기
● 플러그
● 스냅 스위치
● 세라믹 타일
● 어린이 안전장치 시스템
이 회람은 2021년 1월 25일에 시행되었습니다.
카타르: 에너지 효율
에어컨에 대한 에너지 라벨링 및 최소 에너지 성능 요구 사항에 대한 업데이트된 표준 QS 2663:2020을 채택합니다(고시:1/2021).
시행 중(2021년 2월 22일 이후)
카타르 경제통상부는 에어컨에 대한 에너지 라벨링 및 최소 에너지 성능 요건에 관한 표준 QS 2663:2020의 최신 버전을 승인하는 고시 No. 1/2021을 발표했습니다.
이 표준은 공냉식 콘덴서를 사용하는 단일 패키지(예: 창 유형) 비덕트 에어컨과 공냉식 콘덴서를 사용하는 열 펌프 및 공냉식 열 펌프를 사용하는 제품에 대한 에너지 라벨 요구 사항과 최소 에너지 성능 표준(MEPS) 요구 사항을 지정합니다. 해당 부분은 주거, 상업 및 산업 부문, 카타르 표준에 따라 적용 가능합니다.
이 고시는 2021년 2월 22일 관보에 게재된 날 발효되었습니다.
Publication References - Official Gazette No. 2, p202,22.02.2021
[영어 원문]
India: safety
Citing request from stakeholders, BIS has extended the effective date for mandatory registration of phase V products to 1st October 2021. This would mean temporary relief and more time for the industry to comply with the CRS order (mandatory local testing and registration with BIS). Originally Phase V of “Electronics and IT Goods (Requirement of Compulsory Registration) Order, 2012” was to take effect on 1st April, 2021
Product getting extension till 1st October 2021 include:
· Wireless Microphone
· Digital Camera
· Video Camera
· Webcam (finished product)
· Smart speakers (with and without display)
· Dimmers for LED products
· Bluetooth Speakers
Malaysia: energy efficiency
Malaysia Suruhanjaya Tenaga (ST) had announced the enforcement of Minimum energy Performance standards (MEPS) For Freezer on 1st March 2021.
This requirement will be enforce by 1st of March 2021 with a grace period of 1 year .
By 1st March 2022 all freezer will need to comply to this requirement.
Attached is the notification by ST
Thailand: wireless
NBTC has released following standards on 11 March 2021
- NBTC TS 1038-2564 Unmanned Arial Vehicle – for general use
Effective date for this will be 12th March 2021
This standards is to enforce For additional information, this technical standard only to allow additional frequency of 24.05-24.25GHz radar to be used in UAV under class A type approval..
The power allowed should not over 100 mw E.I.R.P.
For previously announced frequency of 433.05-434.79MHz, 2400-2500MHz, 5725-5850MHz, they remains unchanged and require approval under Sdoc.
attached is the official announcement in Thai.
Israel: wireless
Wireless Telegraph Ordinance New Version, Ordinance 5732-1972 - Amendment - (on license-exempt devices subject to certificate of conformity) Regulation 5721-2021
In force (since Mar 03, 2021)
On 3 March 2021, the Israeli Ministry of Communication approved Regulation 5761-2021, which extends the exemption set by the Minister in the order of October 31, 2018 with respect to wireless devices of various types for personal import, and determines that these devices will also be exempt from licensing in commercial imports, in accordance with Government Decision No. 3424. The exempt devices do not require a license, and instead, the importer or manufacturer is required to obtain a certificate of conformity.
The following devices are exempt from licensing;
Section 7 of the Regulations state that "smart circuit breaker for home use" shall be granted an exemption under Section 3 of the Regulations until 31 August 2021.
This regulation repeals the 1982 Israel: Wireless Telegraph Order (Non-Applicability of the Ordinance) (No. 2) and entered into force on 3 March 2021 per the Israeli Rule of Law.
KSA: safety
SASO: the IECEE Recognition Certificate Becomes Mandatory for a Number of Products
On 10 March 2021, the Saudi Organization for Standardization, Metrology and Quality SASO announced that obtaining the IECEE national recognition certificate for a number of electrotechnical products is becoming mandatory starting from 1 July 2021.
The products covered by this announcement are:
SASO clarifies that this requirement shall ensure the protection of the market from counterfeit devices and equipment, and it shall protect the consumers from imported products that do not conform to the standards. It also aims to reduce the accidents that these products may cause, and to facilitate the entry of goods through customs ports without the need for repeated inspection and testing.
Morocco: safety
Products Subject to Technical Regulations, List, January 2021
Published on Jan 29, 2021
The Moroccan Ministry of Industry, Trade Investment and the Digital Economy has issued a list indicating the products that are subject to technical regulations in Morocco. The list contains regulated products, along with their corresponding standards, and it was updated at the end of January 2021.
Also released are a list specifying which products are controlled at the country of origin with their customs codes, and another showing products that are inspected upon arrival in Morocco.
Moroccan regulation covers a wide range of products including, but not limited to:
Please find 2 list of regulated products
Brazil: telecom
Yesterday (Mar 9th) ANATEL released the Act nº 1477. This new Act establish the technical requirements for the use of the spectrum by devices operating in the frequency range from 3,300 MHz to 3,700 MHz.
This new publication make it possible to test and approve the 5G NR band n78 in Brazil. This Act becomes in force as for April 1st, 2021.
See annex for your reference.
Brazil: wireless
Approving the Technical Requirements and Test Procedures for Restricted (Low Power) Radio Communication Equipment, Act No. 14448, December 2017 - Amendment - (on requirements for equipment operating in the 5.925–7.125 MHz band (6 GHz broadband) Act No 1306/2021
In force (since Mar 01, 2021)
On 1 March 2021, the Brazil National Telecommunications Agency (ANATEL) published Act No 1306/2021, originated by Public Consultation No. 82/2020, to amend Act No. 14448/2017 approving technical requirements and test procedures for restricted (low power) radio communication equipment.
The Act amends the technical requirements for Broadband Wireless Access Systems for Local Area Networks operating in the 5.925–7.125 MHz band. The act also amends Annex I of the Act No. 14448/2017 to amend the definitions.
Act No 1306/2021 entered into force on 1 March 2021
Philippines: safety
List of Products and Systems Under Mandatory Certification, Circular No. 21-05, 2021
In force (since Jan 25, 2021)
The Department of Trade and Industry's Bureau of Philippine Standards (DTI-BPS) published an updated list of products under mandatory certification in Circular No. 21-05.
The DTI-BPS updated the list which is classified into 3 groups namely:
The products covered include, inter alia, the following:
This Circular entered into force on 25 January 2021
Qatar: energy efficiency
Adopting Updated Standard QS 2663:2020 on Energy Labelling and Minimum Energy Performance Requirements for Air-Conditioners, Decision No. 1/2021
In force (since Feb 22, 2021)
The Qatari Ministry of Economy and Trade has issued Decision No. 1/2021 approving the updated version of standard QS 2663:2020 on Energy Labelling and Minimum Energy Performance Requirements for Air-Conditioners.
This standard specifies the energy labelling requirements and the Minimum Energy Performance Standard (MEPS) requirements for single-package (such as window type) split-system non-ducted air conditioners using air and water cooled condensers, and heat pumps employing air-cooled condensers and ducted air-conditioners using air-to-air heat pumps for residential, commercial and industrial sector, as applicable in accordance with Qatari standards.
This Decision entered into force on 22 February 2021, on the date of its publication in the Official Gazette.
브라질: 무선
지난 2월 26일, ANATEL은 1306조를 발표했습니다. 이 새로운 고시는 5,925-7,125 MHz(항목 11.7)의 주파수 범위에서 Wi-Fi 6E 기술 요건을 포함하도록 고시14448(제한 방사선 장비의 적합성 평가를 위한 기술 요건)을 개정합니다. 이는 브라질에서 Wi-Fi 6E 기술이 적용된 기기를 승인하고자 하는 모든 제조업체에게 좋은 소식입니다.
영문 고시 1306/2021는 첨부파일을 참고해 주시기 바랍니다.
말레이시아: 통신
SIRIM이 2월 둘째 주 이후로 인증서 형식을 변경했음을 알리기 위한 것입니다.
새로운 인증서 형식 확인하기
MCMC가 모듈 등을 포함한 모든 항목 세부 정보를 표시를 요청하였습니다.
2월 25일, SIRIM / MCMC는 3G 네트워크 선셋으로 인해 3GPP TS 34.229-1에 따라 VoLTE 인증에 대한 최소 테스트Parameter를 업데이트했습니다. 3GPP TS 34.229-1에 따른 VoLTE 인증 parameters가 첨부되어 있습니다.
SIRIM은 또한 형식 승인 인증 과정 중에 이 보고서의 평가를 위해 추가 비용을 청구할 것입니다.
5G CPE (Customer Premise Equipment)에 대한 임시 형식 승인의 구현이 2020 년 12 월 20 일부터 추후 공지가있을 때까지 1 년 더 연장됩니다. 따라서 모든 신규 신청 및 적합성 인증서 (CoC) 갱신은 최대 1 년의 유효 기간으로 허용됩니다.
이는 5G 표준이 아직 확정되지 않았기 때문입니다.
따라서 새로운 요구 사항이 있으면 그에 따라 업데이트합니다.
이 링크에서 말레이시아 SIRIM 용 5G CPE 인증에 대한 자세한 요구 사항을 찾을 수 있습니다.
말레이시아: 무선
477.0125 MHz ~ 477.4875 MHz 및 477.5250 MHz ~ 477.9875 MHz 주파수 대역에서 작동하는 개인 무선 서비스 장치의 클래스 할당 취소, 2021년 2월 4차 공지
시행 중(2021년 2월 1일 발행)
말레이시아 통신 및 멀티미디어 위원회(MCMC)는1998년 통신 및 멀티미디어법(CMA) 169조에 따라 477.0125 MHz ~ 477.4875 MHz 및 477.52 MHz ~ 47.52 MHz에서 작동하는 개인 무선 서비스 장치에 대해2023년 1월 1일 이후로는 이러한 개인 무선 서비스 장치의 사용이 더 이상 허용되지 않습니다. 따라서 위에서 언급한 주파수 대역에서 작동하는 새로운 개인 무선 서비스 장치의 구입 및/또는 수입은 권장되지 않습니다.
본 고지는 통신 및 멀티미디어(스펙트럼) 규정 2000의 규정 28에 따라 에 발행됩니다.
말레이시아: 안전
SIRIM은 지난주 통신 및 멀티미디어 제품과 함께 제공되지 않는 어댑터를 위한 선언문을 구현하겠다고 발표했습니다.
이는 2021년 3월 1일부터 시행되며, 모든 형식승인 신청자는 형식승인 신청서에 대한 각 형식승인 신청서의 제출과 함께 주체 또는 제조업체로부터 신고서를 제출하여 업로드해야 합니다. 신고서는 SIRIM이 제공한 템플릿, 즉 인증할 통신 및 멀티미디어 제품과 함께 제공되지 않는 어댑터에 대한 선언을 따라야 한다는 점에 유의하십시오.
선언해야 할 필수 세부 사항은 다음과 같습니다.
i) 어댑터 없이 자체 판매될 제품의 규제 모델 또는 마케팅 이름 및 브랜드 이름
ii) 위에서 지정한 제품에 대해 호환되는 어댑터의 모델 이름
iii) 인증 보유자는 에너지 위원회(Suruhanjaya Tenaga)로부터 승인 인증서(CoA)를 취득하고, 어댑터에 SIRIM-ST 라벨을 부착해야 합니다.
실제로 이 선언에 대한 요구 사항은 이미 이전에 시작되었지만, 특정 format이 존재하지 않았습니다.
이제 SIRIM은 이에 대한 특정 format을 발행합니다.
베트남: 통신
베트남 MIC는 모든 모듈은 형식 승인 인증이 요구된다고 구두로 통보했습니다.
모듈별로 테스트 결과가 다를 것으로 생각하기 때문입니다.
따라서 TA는 승인할 모든 모듈을 포함해야 합니다.
다음은 그 예입니다.
이 인증 계획은 이미 구현되었으며 구두로만 언급되지만 모든 연구소와 인증 기관은 이미 이 요구사항을 구현하고 있습니다.
요르단: 무선/통신
통신 및 단말 장비에 대한 기술 규칙, 표준 및 사양, 2021년 2월
시행 중(2021년 2월 10일 출판)
2021년 2월 요르단 전기통신규제위원회는 통신 및 단말장비에 대한 기술 규칙, 표준 및 사양 목록을 발표했습니다.
이러한 표준과 사양은 형식 승인 인증서를 획득하고 통신 장비를 왕국 내로 반입하기 위해 필수적입니다. 이 목록에는 무선 주파수, 전자파 적합성(EMC), 공중 보건 및 안전, 환경, 140개 유형 및 장치 등급에 대한 위험 물질(RoHS) 사용 제한 등의 다양한 영역이 포함됩니다.
목록에는 장치 사용 사양이 포함되어 있으며, 그 중에서도 다음과 같은 기술이 사용됩니다.
■2G, 3G 및 4G 기술
■ WLAN 기술
■ RFID 기술
■ PSTN 기술
■ 단거리 장치(SRD)
■ 글로벌 내비게이션 위성 시스템(GNSS)
유무선 통신 장비에 대한 형식 승인에 관한 결정 제9조의1/2020의 5C조에 기초하여 형식 승인 인증서를 획득하고자 하는 회사는 시험소에서 발행한 기술 시험 보고서를 위원회에 제공해야 합니다. 여기에는 무선 주파수, EMC, 안전 및 SAR 평가에 대한 보고서가 포함되어야 합니다. 이 보고서는 장치가 통신 및 단말 장비의 기술 규칙, 표준 및 사양을 준수함을 증명합니다.
이스라엘: 무선
새로운 제품 목록은 이스라엘 통신 규정에서 제외됩니다.
이스라엘 정부는 통신 수요에서 면제되는 새로운 최신 제품 목록을 발표했습니다.
1. IEEE 802.15.1의 경우 BT 장치는 2,400-2483.5MHz에서 작동하며, 내장형 안테나는 최대 100mW.i.i.r.p
ANT/ANT+ 장치는 최대 100mWe.i.r.p의 내장 안테나로 2,400-2483.5MHz에서 작동합니다.
2. 위치 결정을 위한 위성 송신 수신 전용 장치 GPS, GLONASS, GALLETO 또는 BEIDOU와 같은 글로벌 장치.
3. 위성 방송 수신을 위해 사용되는 측면 장비를 포함하여 직경이 244cm를 초과하지 않는 포물선 안테나
4. 1,000 GHz ~ 3,000 GHz 범위의 적외선 주파수 분야에서 작동하며 그 전송 속도는 200 mW를 초과하지 않는 제품
5. 컴퓨터 주변기기 - 마우스, 키보드;
6. 컴퓨터 모니터;
7. 비디오 스트리머(유럽 무선 장비 지침의 규정을 준수함) 2014/53/EU 또한 이를 나타내는 CE 마크를 부착합니다.
8. 전자책 리더(셀룰러 없는 제품)
9. 태블릿(셀룰러 없는 제품)
10. 노트북(셀룰러 없는 제품)
11. 데스크톱 컴퓨터(셀룰러 없는 제품)
12. 공중파 방송 수신용 컨버터) TV 수신기 셋톱 박스(유럽 라디오 장비 지침의 조항을 충족함) 2014/53/EU의 CE 마크가 표시되어 있습니다.
13. TV 세트입니다.
14. FM/DAB/AM 기술을 이용한 공중파 수신용 라디오 수신기
15. 휴대 전화의 예비 부품
16. 손목시계(휴대용 손목시계 제외)
17. 진공 청소기;
18. 휴대용 배터리 작동 금속 탐지기
이 새로운 면제 제품 목록과 일치해야 하는 세관 규정이 여전히 일치하지 않으며, 일치 되기 까지 시간이 좀 걸릴 것이라는 점을 유의하십시오
멕시코: 무선/통신
통신 및 무선 장비에 대한 적합성 평가 절차를 승인합니다. 2020년 2월
시행 중(2021년 2월 25일 이후)
2020년 2월 25일, 연방전기통신연구소(IFT)는 전기 통신과 방송에 대한 적합성 평가 절차를 발표했습니다. 이 절차는 통신 네트워크에 연결하거나 무선 주파수를 사용할 수 있는 통신 및 무선 장비용 제품, 장비, 장치 및 인프라에 적용됩니다. 다음 네 가지 인증 체계가 구축됩니다.
a) 단일 배치에 대한 모델별 샘플,
b) 두 개 이상의 로트에 대한 모델별 및 감시 샘플을 채취합니다.
c) 제품 모델 및 보안 감시 제품군에 따라 샘플을 채취합니다.
d) 기기별, 감시별로 표본을 추출합니다. 이러한 체계를 통해 사물인터넷(IoT) 장치 및 단거리 무선 통신 장치 범위를 비롯한 다양한 제품에 대한 민첩하고 유연한 인증을 받을 수 있습니다. 상기 내용은 섹터의 구별에 따라 달라집니다.
본 계약에는 6개의 부록이 있으며, 이 부록은 다음과 같은 주제를 다룹니다.
■ 부록 A제품 인증 요건입니다.
■ 부록 B 인증 요청입니다.
■ 부록 C적합성 증명서입니다;
■ 부록 D의견 요청;
■ 부록 E검사 의견 형식입니다.
■ 부록 F통신 및 방송과 관련된 보완적 기술 조항 및 멕시코 공식 표준(본 주문서 발행일 기준)입니다.
이 계약에는 정의, 승인 유형, 승인 절차, 라벨 요구 사항 및 인증 설명이 포함됩니다. 이 고시 시행 전에 인증기관에서 발급한 적합성 증명서는 본 통신 및 방송 적합성 평가 절차의 조항에 따라 발급된 적합성 인증서의 모든 법적 효력을 가집니다. 마찬가지로, 참조된 적합성 증명서는 보유자에게 발급된 기간 동안 유효하며 연장할 수 없습니다.
이 고시는 발행일로부터 365일 이내에 발효되며 공식 관보에 게시된 "2005 년 8 월 11 일에 발행된, 연방 통신위원회를 통해 통신 및 교통부의 공식 멕시코 표준을 준수하는 제품의 적합성을 평가하는 절차"를 대체합니다.
멕시코: 통신
전기통신제품의 비이온화 무선배출량 최대제한 준수규격, 특정 흡수율, 협정서, IFT-012-2019
시행 중(2021년 2월 25일 이후)
본 기술 조항은 통신 네트워크에 연결하거나 특정 AB를 사용하여 30MHz ~ 6GHz 범위의 무선 스펙트럼을 사용할 수 있는 통신 제품, 장비 또는 장치의 무선 주파수 전자기 방사선의 최대 한계를 준수하기 위한 기술 사양을 설정합니다. 인간의 근접성을 평가하는 흡수 지수(SAR)를 측정했습니다.
이 기술 조항은 다음 사항을 보장하기 위한 것입니다.
∙ 특히 300 MHz ~ 6 GHz의 주파수 범위에서 귀에 가까운 머리 부근에서 사용되는 그러한 제품은 비이온화 무선 주파수 전자기 방사선의 기본 노출 한계를 준수합니다.
∙인체에서 200mm 이하의 거리에서 사용되는 이러한 제품은 비이온화 무선 주파수 전자기 방사선의 기본 노출 한계를 준수합니다.
섹션 5에 설명된 테스트 방법을 통해 무선 통신 장치가 표 1에 명시된 기본 제한을 준수하는지 평가하고 검증할 수 있습니다.
기술 조항은 기본적으로 국제 비이온화 방사선 방호 위원회 "시간 변동 전기장, 자기장 및 전자기장 (최대 300 GHz)에 대한 노출을 제한하기 위한 지침" 외에 IEC 62209-1 및 IEC 62209-2와 연계되어 있습니다. 그러나 비이온화 방사선방호 국제위원회가 사용하는 통신 제품, 장비 또는 장치의 무선 주파수 전자파 최대 한계치에 대해 고려된 주파수 범위에서는 차이가 있습니다.
이 계약은 2021년 2월 25일부터 발효됩니다.
Publication References - DOF: 26/02/2020
멕시코: 에너지 효율
도로조명 및 공공 옥외공간의 LED 발광체 에너지효율 규격 및 시험방법, 표준 NOM-031-ENER-2019
승인됨(2021년 6월 1일 시행)
이 표준은 배터리와 같은 기타 에너지 원뿐만 아니라 공공 전기 공급을 전력으로 사용하는 조명 도로 및 공공 실외 공간을위한 직류, 교류에서 공칭 전압이 최대 480V, 직류에서 최대 100V 인 LED 조명기구에서 에너지의 효율적인 사용을 촉진하는 사양 및 테스트 방법을 설정합니다
섹션 2에 따라 에너지 효율에 대한 다른 표준에 설정된 제품은 적용 분야에서 제외되며 다음과 같은 LED 조명기구도 제외됩니다.
● 공공 실외공간의 장식적 또는 장식적 조명용
● 신호 전달용
● 색상 변화 빛 또는 단색 빛(녹색, 적색, 황색, 청색 등)을 방출
● 바닥, 물속, 기밀 또는 위험지역에 설치되는 조명
이 표준에는 다음과 같은 요구 사항도 포함되어 있습니다.
■ 시험방법은 광효율, 공칭 총 발광 유속 변화, 상관된 색온도, 유지된 총 발광 유속 등을 포함한다.
■ 라벨 부착 - NOM-008-SCFI-2002에 따른 단위뿐만 아니라 섹션 10에 열거된 데이터와 함께 제품의 본체에 판독 가능하고 지워지지 않게 표시되어야 합니다.
■ LED 조명기구의 포장은 10.2.1절에 열거된 데이터와 NOM-008-SCFI-2002에 따른 장치를 가독성 있게 포함해야 합니다.
■ 제품 정보를 제공합니다.
■ 지침 및 보증을 제공합니다.
■ 적합성 평가 절차를 따릅니다.
이 표준은 2021년 6월 1일부터 시행되며 NOM-031-ENER-2012를 폐지합니다. 2012년 표준에 따라 발급된 인증서는 인증서의 만료일까지 유효합니다. 또한 표준 NOM-031-ENER-2012에 따라 인증된 제품은 재고가 소진될 때까지 판매할 수 있습니다.
Publication References - Diario Official, 03.03.2021
인도: 안전
IS 1293의 구현에 관한 산업계에 대한 정보, 지침 문서, 2021년 2월
2021년 2월 25일 출판되었습니다.
"가정용 플러그 및 콘센트용 IS 1293: 2005는 최대 250V 및 최대 16A 정격 전류를 포함한 가정용 및 유사한 용도의 정격 전압용 플러그 및 콘센트에 대해 350개 이상의 라이센스가 부여된 BIS 인증을 받았습니다.
이 표준은 2019년에 개정되어 IS 1293: 2019로 발행되었습니다. 현재 IS 1293의 2005년과 2019년 버전이 모두 유효합니다. 본 문서는 2005년 버전이 철회되고 2019년 버전이 효력을 발휘하는 2021년 10월 23일까지 유효합니다.
2019년 12월, DPIIT는 IS 1293에 따라 플러그와 콘센트에 BIS의 필수 인증을 통보했습니다. 본 품질 관리 명령은 2020년 1월 12일부터 적용됩니다.
표준 및 QCO에 따른 제품 커버리지와 관련하여 업계가 제기한 우려 사항을 고려하여, 산업협회를 포함한 모든 이해 관계자들과 회의를 개최하였습니다. 이 정보는 회의 결과와 업계 피드백을 바탕으로 IS 1293"에 따라 제품의 적용 범위에 대한 명확한 설명을 위해 게시되고 있습니다.
태국: 에너지 효율
가정용 냉장고 및 냉장고-냉동고에 대한 필수 에너지 효율 요건, 고시, B.E. 2021 년 2564 년
승인 (2021 년 8 월 29 일 시행)
이 규정은 산업 제품 표준법의 권한에 따라 2021 년 3 월 2 일 태국 산업부가 발표했습니다.
2020 년 5 월 29 일자 산업부의 고시 5711규정에 따라 압축 공기 냉각 시스템 및 교류를 사용하는 냉장고 / 냉동고와 같은 특정 가정용 냉장고 및 냉동고는 해당 제품의 에너지 효율 요구 사항을 지정하는 태국 산업 표준 TIS 2186-2561 (2018)을 충족하고 이에 따라 승인되어야합니다.
이 표준은 2021 년 8 월 29 일부터 의무적으로 적용됩니다.
Publication References - Thai Government Official Gazette No. 138/15, 02.03.2021, p. 59
태국: 안전
승인 (2021 년 8 월 29 일 시행)
2019 년 12 월 27 일 태국 산업부는 해당 발표를 통해 산업 제품 표준 TIS 1195-2536 (1993)을 철회하고 일반적으로 사용되지만 학교, 극장, 예배당 및 직장과 같은 공공 집회 장소에서도 사용할 수 있는, 가정용 및 유사 기기 용 오디오, 비디오 및 유사 전자 기기의 안전 요건을 규정하는 새로운 TIS 1195-2561을 의무화합니다.
태국 산업 제품 표준법에 따라 제정 된 표준은 해당 제품에 대한 정의, 일반 용어, 테스트 조건, 마킹, 감전 방지 요구 사항, 절연 요구 사항 및 내구성 등을 포함합니다.
Publication References - Thai Government Official Gazette No. 136/316D, 27.12.2019
[영어 원문]
Brazil: wireless
Last Friday (Feb 26th) ANATEL released the Act nº 1306. This new Act updates the Act 14448 (Technical Requirements For Assessing Conformity Assessment of Restricted Radiation Equipment) to include the Wi-Fi 6E technical requirements in the frequency range of 5,925-7,125 MHz (Item 11.7). This is a great news for all manufacturers wishing to approve devices with Wi-Fi 6E technology in Brazil.
We translated the Act 1306/2021. See annex for your reference.
The official document can be access using the link below:
Malaysia: telecom
This is to inform SIRIM had changed the Certificate format since 2nd week of February.
Attached is the new format.
This is because MCMC required to show all the item details including modules and others.
Malaysia: telecom
On 25th February , SIRIM / MCMC had updated the Minimum Test Parameters for VoLTE Certifications according to 3GPP TS 34.229-1 due to 3G Network Sunset.
Attached are the parameters for VoLTE Certification according to 3GPP TS 34.229-1
SIRIM will also charge additional fee for the evaluation of this report during the type approval certification process .
Malaysia: wireless
Cancellation of Class Assignment of Personal Radio Service Devices operating in 477.0125 MHz to 477.4875 MHz and 477.5250 MHz to 477.9875 MHz Frequency Bands, Fourth Notice, February 2021
In force (published on Feb 01, 2021)
The Malaysian Communications and Multimedia Commission (MCMC) hereby wishes to announce that the Class Assignment issued under Section 169 of the Communications and Multimedia Act (CMA)1998 for personal radio service device(s) operating in the 477.0125 MHz to 477.4875 MHz and 477.5250 MHz to 477.9875 MHz frequency bands will be cancelled effective on 1 January 2023. Usage of these personal radio service device(s) will no longer be permitted from the stated date onwards.
Therefore, the purchase and/or importation of any new personal radio service device(s) operating in the abovementioned frequency bands are not encouraged.
This Notice is issued in pursuant to Regulation 28 of the Communications and Multimedia (Spectrum) Regulations 2000.
Malaysia: safety
SIRIM had announced on last week on implementing the declaration for adaptor that not support together with Communications and multimedia product that to be certified .
This will be effective from 1st of march 2021 , and all applicants of Type Approval are required to provide a declaration letter from the Principal or Manufacturer and upload it together with the submission of each Type Approval application for Type Approval. Please be noted that the declaration letter shall follow the template provided by SIRIM, namely the DECLARATION FOR ADAPTOR NOT SUPPLIED TOGETHER WITH COMMUNICATIONS AND MULTIMEDIA PRODUCT TO BE CERTIFIED
The necessary details to be declared includes:
i) The regulatory model or marketing name and brand name of the product to be sold on its own without an adaptor
ii) The model name of the compatible adaptor(s) for the product specified above
iii) The Certificate Holder’s obligation to obtain Certificate of Approval (CoA) from the Energy Commission (Suruhanjaya Tenaga) and to affix SIRIM-ST label on the adaptors
Actually this requirement already started earlier , just that there are no fix format on this declaration
Now SIRIM issue the fix format for this
Malaysia: telecom
Please be informed that the implementation of the interim Type Approval for 5G Customer Premise Equipment (CPE) is extended for another year, effective from 20th December 2020, until further notice. As such, all new applications and renewal of Certificate of Conformity (CoC) are allowed with a maximum validity of one (1) year.
This is due to the 5G standards have not yet been finalized .
So once there are new requirement we will update accordingly.
You may find the detailed requirement for certification of 5G CPE for malaysia SIRIM in this link https://ecomm.sirim.my/Announcement_Details.aspx?a=209
Vietnam: telecom
Vietnam MIC now had verbally informed that all modules need to be approved for the type approval.
This is because they think that there will be different testing result for each modules .
So the TA should include all module to be approved .
Below are the example .
This certification scheme already implemented and it is only mentioned verbally but all labs and certification bodies already implement this requirement.
Jordan: wireless / telecom
Technical Rules, Standards, and Specifications for Telecommunications and Terminal Equipment, List, February 2021
In force (published on Feb 10, 2021)
In February 2021, the Jordanian Telecommunications Regulatory Commission issued a list of technical rules, standards, and specifications for telecommunications and terminal equipment.
These standards and specifications are mandatory in order to obtain a type approval certificate, and to allow telecommunications equipment into the Kingdom. The list covers a range of areas including: radio frequency, electromagnetic compatibility (EMC), public health and safety, the environment, and restricting the use of hazardous substances (RoHS) for one hundred and forty types and classes of devices.
The list includes specifications for devices use the following technologies, among others:
Based on Article 5C of Decision No. 9-1/2020 on Type Approvals for Wired and Wireless Telecommunication Equipment, any company that aims to obtain a type approval certificate must provide the Commission with technical test reports issued by a testing laboratory. Those should include reports on radio frequency, EMC, Safety, and SAR evaluation, that prove the devices conform to the technical rules, standards, and specifications for telecommunications and terminal equipment.
Israel: wireless
New list of products, exempt to the Israeli telecom regulations
The Israeli government published new up-to-date list of products that are exempt from telecom demands:
Please be advised that the customs regulations that supposed to be align with this new list of exempt products, still not align with it and it will take some time (days? Weeks?) To finish this process.
Mexico: wireless/telecom
Approving the Conformity Assessment Procedure for Telecommunications and Radio Equipment, Agreement, February 2020
In force (since Feb 25, 2021)
On 25 February 2020, the Federal Telecommunications Institute (IFT) published a conformity assessment procedure for telecommunications and broadcasting. This procedure is applicable to products, equipment, devices, and infrastructure for telecommunications and radio equipment that can be connected to a telecommunications network and / or make use of the radio spectrum. Four certification schemes are established:
a) Sample by model for a single batch,
b) Sample by model and surveillance for more than one lot,
c) sample by family of product models and surveillance, and
d) sample by device and surveillance. These schemes will allow an agile and flexible certification of various products, including Internet of Things (IoT) devices and short-range radio communication devices scope. The above according to the dynamism of the sector
The Agreement has 6 Annexes, which deal with its following themes:
The Agreement contains definitions, approval types, approval procedures, labeling requirements and clarification of certification. Certificates of Conformity issued by the Certification Bodies before the entry into force of this ordinance will have all the legal effects of the Certificates of Conformity issued under the terms of this Conformity Assessment Procedure for Telecommunications and Broadcasting. Likewise, the referred Certificates of Conformity will remain in force in the terms in which they were issued to the holder and cannot be extended.
The Agreement will enter into force within 365 natural days from publication and will replace the "Procedures for assessing the conformity of products subject to compliance with official Mexican standards under the Ministry of Communications and Transport through the Federal Telecommunications Commission", published in the Official Gazette of the Federation on 11th August 2005.
Mexico: telecom
Specifications for Compliance with the Maximum Limits for Non-Ionizing Radio Emissions from Telecommunications Products, Specific Absorption Rate, Agreement, IFT-012-2019
In force (since Feb 25, 2021)
This Technical Provision establishes the technical specifications for compliance with the maximum limits of radiofrequency electromagnetic radiations of telecommunications products, equipment, or devices that can be connected to a telecommunications network and/or make use of the radio spectrum in the range of 30 MHz to 6 GHz, using the specific absorption index (SAR) measured in the proximity of the human body.
This Technical Provision aims to ensure that:
The test methods described in Section 5 allow evaluation and verification that wireless communication devices comply with the basic limits established in Table 1.
The technical provisions are basically aligned with IEC 62209-1 and IEC 62209-2, in addition to the International Commission on Non-Ionizing Radiation Protection, "Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields (up to 300 GHz)". It differs however in the frequency range considered for the maximum limits of radio frequency electromagnetic radiation of telecommunications products, equipment or devices used by the International Commission on Non-Ionizing Radiation Protection.
The Agreement will enter into force on 25 February 2021.
Mexico: energy efficiency
Specifications and Test Methods for Energy Efficiency in LED Luminaires for Road Lighting and Public Outdoor Areas, Standard NOM-031-ENER-2019
Approved (coming into force on Jun 01, 2021)
his standard establishes the specifications and test methods that promote the efficient use of energy in LED luminaires, intended for lighting roads and public outdoor areas, which use for their power the public electricity supply, as well as other sources of energy, such as batteries, accumulators and self-generation, in alternating current and/or direct current, with a nominal voltage up to 480 V in alternating current and up to 100 V in direct current.
As per Section 2, products established in another Standard on energy efficiency are excluded from the field of application, as well as the following LED luminaires:
The standard also contains the following requirements:
This standard will enter into force on 1 June 2021 and will repeal NOM-031-ENER-2012. Certificates issued under the 2012 standard shall be valid until the expiry date of the certificate. Furthermore, products certified under Standard NOM-031-ENER-2012 may be sold until the inventory is exhausted.
India: safety
Information to Industry regarding implementation of IS 1293, Guidance Document, February 2021
Published on Feb 25, 2021
"IS 1293: 2005 for Plugs and Socket-outlets for Household and Similar Purposes of Rated Voltage up to and Including 250 V and Rated Current up to and Including 16 A is under BIS Certification with more than 350 Licences.
This Standard was revised in 2019 and published as IS 1293: 2019. At present both 2005 and 2019 versions of IS 1293 are valid. They will remain valid till 23rd October 2021 after which 2005 version will be withdrawn and 2019 version shall remain in force.
In December 2019, DPIIT notified Plugs and Socket-outlets as per IS 1293 for mandatory certification by BIS. This Quality Control Order is in effect from 01. 12. 2020.
In view of the concerns raised by the Industry with respect to the coverage of products under the Standard and the QCO, a meeting was held with all stakeholders including Industry Associations. Based on the outcome of the meeting and feedback from the industry, this information is being published for clarity on coverage of products under IS 1293".
Thailand: energy efficiency
Mandatory Energy Efficiency Requirements for Household Refrigerators and Refrigerator-Freezers, Ministerial Regulation, B.E. 2564, 2021
Approved (coming into force on Aug 29, 2021)
This Ministerial Regulation was published by the Thai Ministry of Industry on 2 March 2021, under the authority of the Industrial Product Standards Act.
The Regulation requires that certain household refrigerators and refrigerator-freezers, such as refrigerators/freezers using compressed air cooling system and alternating current meet Thai Industrial Standard TIS 2186 - 2561 (2018) specifying the energy efficiency requirements of said products, and are approved in accordance with the Announcement No. 5711 of the Ministry of Industry dated 29 May 2020.
The standard will be of mandatory application with effect from 29 August 2021.
Thailand: safety
Approved (coming into force on Aug 29, 2021)
This Announcement madly the Thai Ministry of Industry on 27 December 2019, withdraws industrial product standard TIS 1195-2536 (1993) and makes mandatory the new TIS 1195-2561 laying down safety requirements of audio, video and similar electronic apparatus intended for household and similar general use but which may also be used in places of public assembly such as schools, theatres, places of worship and the workplace.
The standard formulated in accordance with the Thai Industrial Product Standards Act, covers definitions, general terms, testing conditions, marking, requirements for electric shock prevention, insulation requirements and fire resistance, etc for the said products.
인도네시아: PV
인도네시아 에너지 광물자원부는 Circular PEREMEN ESDM No 2 Tahun 2021을 발행했습니다. 2021년 1월 5일입니다.
본 회람은 크리스털 실리콘 태양광 발전 모듈에 대한 SNI 요건을 의무화하기 위한 것입니다.
본 회람은 2021년 1월 7일부터 시행됩니다. 모든 크리스털 실리콘 태양광 발전 모듈은 본 고시에 따라 SNI 인증을 받아야 합니다. 또한 모든 실리콘 태양광 모듈 수입업체가 SNI를 준수할 수 있도록 12개월의 유예 기간이 있을 것이라고 언급했습니다. 2022년 1월 7일까지 모든 크리스털 실리콘 태양광 발전 모듈은 SNI 요건을 준수해야 합니다. 고시를 첨부 드립니다.
이집트: 에너지 효율
이집트는 램프 에너지 효율 요건 표준 ES 7823/2020의 적용을 위한 과도기를 연장합니다.
이집트 무역 산업부는 램프 및 조명 장치에 대한 에너지 효율 요구 사항 이집트 표준 ES 7823/2020의 이행 기간이 2022 년 2 월 3 일까지 또는 표준이 개정 될 때까지 1 년 연장되었다고 발표했습니다.
한편, 제조업체와 수입업체는 이집트 표준 7823/2014 전기 램프의 에너지 효율 요구 사항을 계속 준수할 수 있습니다.
멕시코: 통신
IMT-2000 3GPP - 무선스펙트럼을 사용하거나 통신망에 접속하는 이동 단말장비에 관한 규격, 표준 IFT-011-2017 제2, 협정, 2018년 1월 - 개정 - (VoLTE 음성통화), 고시, 2021년 2월
승인됨(2021년 8월 11일 시행)
2021년 2월 12일, 멕시코 IFT는 표준 IFT-011-2017을 개정하여 자동 VoLTE(Voice-over-LTE) 호출이 차단되거나 기능이 사용 가능한 곳에서 제한되지 않도록 하는 계약을 발표했습니다.
이 계약의 주요 목표는 VoLTE 기능을 통해 제조된 모바일 단말 장치가 자동으로 음성 통화를 설정하도록 하는 것이며, 적절한 경우 대리점 또는 공인 모바일 서비스 및 테스트 방법이 적용되어, 이를 통해 사용자에게 이 기능을 활성화하여 네트워크에서 작동의 차단이나 제한이 없도록 하는 것입니다.
또한, 본 개정의 발효 전에 발급된 적합성 및 승인 증명서는 여기에 명시된 기간까지 유효해야 하며, 모니터링 대상이 될 수 없으며, 이와 유사한 장비를 위해 확장되거나 사용될 수 없습니다.
이 개정안이 발효될 때부터, ETN이 모바일 서비스를 위해 의도된 작동 주파수 대역에서 VoLTE 기능을 통해 음성 통화를 자동 설정할 수 있는 모든 구성 요소를 갖추고 있지 않은 경우, 표면적이고 명확하며 눈에 보이는 표시 또는 레이블을 통해 그것의 컨테이너, 포장, 라벨, 포장지, 여행용 시트, 등록부 또는 전자 표시(제품 소프트웨어)에 표기해야 합니다.
제출된 개정안은 2021년 8월 11일부터 시행됩니다.
스리랑카: 무선
스리랑카 전기통신규제위원회(TRCSL)는 1991년 개정된 스리랑카 전기통신법 제5조(o), 제5조(q), 제5조(v) 및 제5조(w)와 함께 제68조에 따라 2020년 무선통신단말장치(RTTE) 형식승인규칙을 제정했습니다.
RTTE 형식 승인 규칙은 2020년 9월 10일자의 고시 2196/51호에 게재되었으며, 2020년 12월 16일부터 시행됩니다.
다음은 이 형식 승인 변경 사항의 요약입니다.
1. 형식 승인 금액
2.1 샘플은 형식 승인 신청을 하기 위해 필요하며, TRC는 모든 TA에 대해 최대 2개의 샘플을 요청할 수 있는 권한을 보유합니다(이전에는 Telecom 제품만 샘플 필요). TRCSL은 2년 동안 샘플을 보관할 권리가 있습니다.
3. 좀 더 구체적인 문서를 요청합니다.
4. TRC가 승인한 모든 장비에 대한 필수 라벨 요구 사항입니다. 라벨은 TRCSL에서 구입해야 합니다. 라벨 요구 사항은 2021년 6월 16일부터 시행될 예정입니다.
5. 기기 수입에 대한 수수료
6. TRC가 언급한 30일 간의 처리 시간은 실제 기간은 다양합니다(받은 샘플 및 모든 문서에 따라).
7. 추가 결제와 함께 빠른 배송 조회 방식을 제공합니다.
8. TA 예외 목록(부록 D, E, J, K에서 제외되지 않은 TA 제외 장치가 제외되지 않았기 때문에 TA 제외 장비의 수입이 형식 승인된 장치보다 어려울 수 있으므로 문제가 많습니다. TRCSL은 이 장치가 TA에서 제외되는 이유를 확인하고 부록 E의 기술 및 기타 매개 변수를 준수해야 합니다. 그렇게 된다면 수입 전에 형식 승인 면제 레터를 발급 받는 것이 유리할 것입니다.
9. 유효 기간 만료 3 개월 이내 시험 성적서 제출 (또는 제조공장의 유효성 선언서)
10. 기존 인증서는 6개월 동안 유효하며, 그 후에는 모두 새 인증서를 신청해야 합니다(이 인증 유형에는 표준 형식 승인 프로세스만 사용 가능).
11. 인증서의 유효기간은 3년에서 4년으로 변경되며, 면제 서한도 마찬가지입니다. 유효기간은 4년입니다.
12. 인증서 보유자는 통신 면허를 보유한 현지 기업이어야 합니다. 제조업체에 있는 이전 인증서는 6개월 후에는 유효하지 않으며, 지역 회사 아래에 Normal New Application을 적용해야 합니다.
13. Simplified Application은 12월 16일 이후 신규 신청을 이미 수행한 경우에만 사용할 수 있습니다. Simplified Application은 대체 수입업체/제2 수입업체에 사용됩니다.
14. 면제 서신의 정의는 아직 명확하지 않으므로, 케이스 바이 케이스로 처리하는 것을 제안하고자 합니다. 제품이 면책 서신이 가능하다고 이해 할수 있지만, 형식 승인을 신청하는 것은 당국에 의해 요청될 수 있습니다.
콜롬비아: 안전
LETILAP, RETILAP, Resolution No. 180540, 2010 - 개정 - (유효기간 연장에 관한) Resolution No. 40031, 2021
시행 중(2021년 2월 05일 이후)
2021년 2월 05일 콜롬비아 광산 에너지부는 2010년 18040번 고시에 의해 승인된 RETILAP 기술 규정의 유효기간을 확대하기 위해 결의안 제40031호를 발행했습니다.
RETILAP 규정의 유효 기간은 고시 40122/2016호에 의해 승인된 마지막 개정을 포함하여 2년 더 연장되었습니다.
이 고시는 2021년 2월 5일에 발효되었습니다.
알제리: 무선
알제리 ARCEP는 사설 내부 무선 네트워크 구축에 사용되는 단거리 장치에 대한 통신 규정을 업데이트했습니다.
이는 유도, RFID, 의료, 일반 ISM 및 레이더와 같은 9KHz – 246GHz의 애플리케이션을 대상으로 합니다.
다음은 국내 차량용 레이더의 76~77GHz 사용량에 대한 업데이트입니다.
이제 최대 출력 전력이 1W 제한되는 77GHz 대역이 가능합니다.
아래 스크린샷을 참조하십시오.
한국: EMC
적합성 평가를 위한 전자파 적합성(EMC) 시험 방법, 고시 No. 2015-110 - 수정 - (KS 표준으로 시험 방법을 변경하는 경우) 고시 No. 2021-10
승인됨(2021년 5월 7일 시행)
2021년 2월 8일, 한국전파연구소는 적합성 평가를 위한 전자파 적합성 시험 방법에 대한 개정안을 발표했습니다.
개정안은 새로운 국가 표준 운영 체제의 도입과 함께 국가 표준에 대한 적합성 평가를 위한 EMC 시험 방법(KS)의 부록에 있는 특정 KN 시험 방법을 변경하기 위해 발행되었습니다.
적용 가능한 장치와 변경된 KS 표준은 다음과 같습니다.
■ 가정용 전기기기 내성시험 : KS C 9814-2:2020,
■ 가정용 전기기기 간섭방지 시험 : KS C 9814-1:2020,
■ 무선 장비에 대한 EMC 공통 테스트: KS X 3124:2020,
■ 무선 데이터 통신 시스템을 위한 특정 저전력 무선 장치에 대한 EMC 테스트: KS X 3126:2020,
■ 특정 저전력 무선 장치에 대한 EMC 테스트: KS X 3125:2020
■ 멀티미디어 장비 전자파 방해 방지 시험 : KS C 9832:2019,
■ 멀티미디어 기기 전자파 내성 시험 : KS C 9835:2019,
■ 차량용 무선 장치 및 차량에 장착된 전기 및 전자 구성 요소에 대한 EMC 테스트 방법: KS C 9995:2021,
■ 자동차 및 내연기관 등에 대한 EMC 시험: KS C 9990:2017,
■ 조명기기 간섭방지 시험 : KS C 9815:2019,
■ 조명기기 내성시험 : KS C 9547:2020,
■ EMC 전기 자전거 테스트 방법: KS C 9994:2021,
■ 의료기기 내성시험 : KS C IEC 60601-1-2:201입니다.
개정안은 전자기 간섭 및 내성 등의 계측기와 관련된 시험 방법을 추가로 변경합니다.
이 고시는 2021년 5월 7일부터 시행됩니다.
러시아: 안전
적합성 선언 등록 및 등록 관리 절차 승인, 고시 478, 2020 - 수정 - (GLN 표시 전환 기간) 고시 877, 2020
시행 중(2021년 2월 9일 이후)
2020년 12월 30일, 러시아 경제개발부는 적합성 선언의 등록 승인 절차 및 등록 관리에 관한 고시 제 478호를 개정하라는 고시 제 877호를 발행했습니다.
고시 877은 러시아/EAEU 이외의 지역에서 제조된 제품의 경우 신청자가 실제 생산 시설의 UNP/GLN(기업 고유의 등록 번호 / 글로벌 번호)을 표시해야 하는 적합성 등록 신청 요건 이행 기간을 제공합니다. 이 의무사항은 2021년 7월 1일부터 시작됩니다.
또한, 개정에 따라 신청서에 GTIN에 대한 정보를 반드시 입력 해야하는 것은 아닙니다.
중국: 안전
CCC(필수제품 인증) 자체 선언 평가 방법의 시행 요건 관련 규정 개정, 2021년 4월 발표
시행 중(2021년 2월 9일 이후)
2021년 2월 9일, 중국인증인증국(CNCA)은 관련 표준이 개정되었을 때 필수 승인 제품의 자가 선언 평가 방법의 구현 요건에 대한 방법를 발표했습니다.
CCC 자체 선언 평가 방법을 적용하는 제품 제조업체는 관련 표준의 개정을 적극적으로 추적하고 수집해야 합니다.
제조업체는 표준을 개정할 때 다음과 같은 방식으로 자체 선언을 구현해야 합니다.
■전환기에는 자율적으로 구본 또는 신본 표준에 따라 평가를 수행하되, 새로운 버전의 표준 시행 후에는 새로운 버전의 표준에 따라 평가를 실시하여야 합니다.
■ 구본규격에 따라 자체선언을 완료한 제품의 경우 1년 이내에 새로운 버전의 자체선언 변경을 완료해야 합니다. 새로운 버전의 표준을 구현하기 전에 출하되어 시장에 출시되었으며 더 이상 생산되지 않는 제품은 새로운 버전의 표준 자체 선언을 수행할 필요가 없습니다.
EAEU: 에너지 효율
EAEU 위원회는 에너지 소비 장치의 에너지 효율에 관한 기술 규정의 시행을 연기합니다 (TREAEU 048/2019).
2021년 1월 29일, 유라시아 경제 위원회(Council of the Eucasia Economic Commission)는 에너지 소비 장치의 에너지 효율에 대한 요건을 승인하는 기술 규정의 발효를 2022년 9월 1일까지 연기했습니다.
개정안은 또한 다음 날짜 및 규정 준수 기한을 개정합니다.
■ EAEU Council의 의사결정 초안 작성, 다양한 유형의 에너지 소비 장치에 대한 라벨의 형태 및 그 설계에 대한 규칙 제정 - 2022년 3월 1일;
■ 부록 3, 5, 6, 9, 12, 13 및 14에 명시된 개별 요건을 1년간 EAEUTR 048/2019에 적용합니다. 이 초안 범위에 해당하는 제품은 다음과 같습니다.
● 전자식 비동기식 모터(엔진 모터)
● 가정용 및 사무용 전기 장비가 대기 모드 및 오프 모드
● 가정용 자동 세탁기
● 전등
● 선풍기
● 내장된 밸러스트가 없는 형광등, 고압 가스 방전 램프
또한, EEC Council은 진공 청소기의 에너지 효율 라벨 표시에 관한 별도의 표준을 제정하였습니다.
최종 결정은 아직 EAEU 웹사이트에 공식적으로 발표되지 않았습니다.
브라질: 안전
직진, 원형 및 콤팩트 관형 형광등에 대한 AC 전자 밸러스트 기술 규정을 승인합니다.고시 78, 2021
승인됨(2021년 3월 1일 시행)
2021년 2월 11일, 브라질 국립 표준화 및 산업 품질 연구소(INMETRO/CONMETRO)는 직선형, 원형 및 소형 관형 형광등에 대한 전자 밸러스트 기술 규정을 승인하는 고시 No. 78/2021을 발행했습니다.
이 규정은 별도로 또는 조명기기의 일부로 시판되거나 소형 관형 형광등을 포함한 키트의 일부로 시판되는 직선, 원형 및 소형 관형 형광등의 교류에 의해 구동되는 전자식 밸러스트에 적용됩니다.
전자식 밸러스트 공급자는 이 규정의 조항을 준수해야 합니다. 국가 지역에서 제조, 수입, 유통 및 판매되는 제품은 사용자와 환경에 안전해야 합니다.
따라서 제5조는 제조업체와 수입업체가 시장에 출시된 제품이 무상으로든 아니든 간에 이 규정의 모든 요건을 충족하는지 확인해야 한다고 규정하고 있습니다. 또한, 생산 및 공급망의 다른 참여자들은 제품 및 상표의 무결성을 유지하여 본 규정의 요구 사항을 준수하도록 해야 합니다.
범위 내의 모든 제품은 브라질 기술 표준 ABNT NBR 14417:2011 AC 공급 관형 형광등 전자 밸러스트 - 일반 및 안전 요구 사항 및 ABNT NBR 14418:2011 AC 공급 관형 형광등 전자 밸러스트 - 성능 요구 사항을 준수해야 합니다. Inmetro가 인증한 시험소에서 승인된 인증은 최소 안전 요구 사항을 준수함을 입증하는 데 도움이 될 수 있습니다.
또한, 제7조제1항의 규정에 따라 인증된 밸러스트는 Portaria No. 267/2009에서 제공한 적합성 확인 씰을 부착할 수 없습니다. 그러나 2020년 7월 6일 이전에 제조 및 수입된 제품은Portaria No. 267/2009에 따라 인증을 받았으며 재고가 끝날 때까지 적합성 확인 씰을 부착하여 판매할 수 있습니다.
이 고시는2021년 3월 1일부터 시행됩니다.
[영어 원문]
Indonesia: PV
Indonesia Ministry of Energy and Mineral Resources had issue a Circular PERMEN ESDM No 2 Tahun 2021. On 5th of January 2021
This Circular is to mandate SNI requirement for crystalline silicon photovoltaic modules
This circular will be mandate from 7th January 2021
All crystalline silicon photovoltaic modules will need to be SNI certified under this Circular.
It also mentioned that there will be a 12 months grace period for all the crystalline silicon photovoltaic modules importer to comply the SNI.
By 7th January 2022 all crystalline silicon photovoltaic modules will need to comply with SNI requirement.
Attached is the circular.
Egypt: energy efficiency
Egypt extends the transitional period for the application of the lamps energy efficiency requirements Standard ES 7823/2020
The Egyptian Ministry for Trade and Industry has announced that the transitional period for Egyptian Standard ES 7823/2020 on Energy Efficiency Requirements for Lamps and Luminaries has been extended by one year until 3 February 2022, or until the Standard is amended, whichever comes first.
In the meantime, producers and importers can continue to follow the Egyptian Standard 7823/2014 Energy Efficiency Requirements for Electrical Lamps.
Mexico: telecom
Specifications on Mobile Terminal Equipment Using Radio Spectrum or Connected to Telecommunications Networks, Standard IFT-011-2017 Part 2, Agreement, January 2018 - Amendment - (on VoLTE voice calls), Agreement, February 2021
Approved (coming into force on Aug 11, 2021)
On 12 February 2021 the Mexican IFT published an agreement in order to amend the Standard IFT-011-2017 to ensure that automatic voice-over-LTE (VoLTE) calling is not blocked or restricted where the functionality is available.
The main objective of the agreement is to ensure that Mobile Terminal Equipment that has been manufactured with the capability automatically establish voice calls, through the VoLTE functionality, will have this functionality enabled and active for the user, so that there is no type of blocking or restriction of its operation in the network of any dealer or, where appropriate, authorized mobile service and also the test methods applied to them.
Further, the certificates of conformity and approval issued prior to the entry into force of these amendment shall remain valid until the term indicated therein, and shall not be subject to monitoring, nor may they be extended or used for similar equipment.
From the entry into force of these amendments, in those cases in which the ETNs do not have all the components that allow the automatic establishment of voice calls through the VoLTE functionality in any of the operating frequency bands intended for mobile service, they must indicate it through a marking or label in an ostensible, clear, visible and legible way in its container, packaging, label, wrapper, travelling sheet, register or electronic marking (product software).
The amendments laid down will enter into force on 11 August 2021.
Sri Lanka: wireless
The Telecommunications Regulatory Commission of Sri Lanka(TRCSL) has made Radio and Telecommunications Terminal Equipment (RTTE) Type Approval Rules 2020 under Section 68 read with Sections 5(o), 5(q), 5 (v)& 5 (w) of the Sri Lanka Telecommunications Act No: 25 of 1991 as amended.
RTTE Type Approval Rules was published in the Extra Ordinary Gazette No. 2196/51 of 09/10/2020 and will come into effect on 16/12/2020.
Below are the summary of this type approval changes .
Exemption letter definition are still not so clear, so we would still suggest it is case by case basis. There are chances that the product suppose for our understanding under exemption letter but it might be requested by authority to apply type approval.
Colombia: safety
Technical Regulation for Lighting and Public Lighting, RETILAP, Resolution No. 180540, 2010 - Amendment - (on extension of validity) Resolution No. 40031, 2021
In force (since Feb 05, 2021)
On 05 February 2021 the Colombian Ministry of Mines and Energy published Resolution No. 40031 in order to extend the validity of the Technical Regulation for Lighting and Public Lighting - RETILAP, approved by Resolution No. 18040, 2010.
The validity of the RETILAP regulation, including its last revision approved by Resolution No. 40122/2016, has been extended for a further two years.
This Resolution entered into force on 5 February 2021.
Algeria: telecom
Algeria ARCEP has updated their Telecommunication Regulations on short-range devices used in the establishment of private internal radio networks
This is covering from 9 KHz – 246 GHz applications like inductive, RFID, medical, general ISM applications and Radars
Here is an update on 76 - 77GHz usage for vehicle radar in the country.
Kindly note now the 77 GHz Band with limitation of 1W maximum output power is possible.
Korea: EMC
Electromagnetic Compatibility (EMC) Test Methods for Conformity Assessment, Notice No. 2015-110 - Amendment - (on change of test methods to KS standards) Notice No. 2021-10
Approved (coming into force on May 07, 2021)
On 8 February 2021, the South Korean Radio Research Agency (RRA) issued an amendment to the Electromagnetic Compatibility (EMC) Test Methods for Conformity Assessment.
The amendment was issued to change certain KN test methods, which are in the annexes of the Notice on EMC Test Methods for Conformity Assessment to the National Standards (KS), with the introduction of the new national standard operating system.
Applicable devices and changed KS standards include:
The amendment further changes test methods related to measuring instruments for electromagnetic interference and immunity, etc.
The Notice will enter into force on 7 May 2021.
Russia: safety
Approving Procedures for Registration of Conformity Declaration and Management of Register, Order No. 478, 2020 - Amendment - (on transition period for indication of GLN) Order No. 877, 2020
In force (since Feb 09, 2021)
On 30 December 2020, the Russian Federation Ministry of Economic Development issued Order No. 877 to amend Order No. 478 on Approving Procedures for Registration of Conformity Declaration and Management of Register.
Order No. 877 provides a transition period for the declaration of conformity registration application requirement that for products manufactured outside Russia/EAEU, the applicant should indicate the UNP / GLN (unique enterprise number / Global Location Number, global location number) of the actual production facility. The obligation will commence on 1 July 2021.
Further, according to the amendment, it is not mandatory to provide information on the GTIN in the application form.
China: safety
Implementation Requirements of Compulsory Product Certification (CCC) Self-declaration Evaluation Methods When Relevant Standards Are Revised, Announcement No. 4, 2021
In force (since Feb 09, 2021)
On 9 February 2021, the Certification and Accreditation Administration of China (CNCA) published an announcement on implementation requirements of compulsory product certification self-declaration evaluation methods when relevant standards are revised.
The manufacturer of the product that applies the CCC self-declaration evaluation method should actively track and collect the revision of the relevant standards.
The manufacturers should implement self-declaration in the following way when the standard is revised:
For the products that have completed the self-declaration in accordance with the old version of the standard, the new version of the standard self-declaration change should be completed within one year. Products that have been shipped, put on the market, and are no longer produced before the implementation of the new version of the standard do not need to carry out the new version of the standard self-declaration.
EAEU: energy efficiency
EAEU Commission Postpones the Entry into Force of the Technical Regulations on the Energy Efficiency of Energy-consuming Devices (TR EAEU 048/2019)
On 29 January 2021, the Council of the Eurasian Economic Commission postponed the entry into force of the Technical Regulations approving the requirements for the energy efficiency of energy-consuming devices" (TR EAEU 048/2019) until 1 September 2022.
The amendment also revises the following dates and the compliance deadlines:
In addition, the EEC Council established a separate standard regarding the energy efficiency labelling of vacuum cleaners.
Final Decision is yet to be officially published on the EAEU website.
Brazil: safety
Approving Technical Regulation for AC Electronic Ballasts for Straight, Circular and Compact Tubular Fluorescent Lamps, Portaria No. 78, 2021
Approved (coming into force on Mar 01, 2021)
On 11 February 2021, the Brazil National Institute of Metrology, Standardization and Industrial Quality (INMETRO/CONMETRO) published Portaria No. 78/2021 which approves the Technical Regulation for Electronic Ballasts for Straight, Circular and Compact Tubular Fluorescent Lamps.
The Regulation applies to electronic ballasts powered by alternating current for straight, circular and compact tubular fluorescent lamps, marketed separately or as part of luminaires and marketed as part of a kit with compact tubular fluorescent lamps, when there is the possibility of using the ballasts separately.
Suppliers of electronic ballasts shall comply with the provisions of this Regulation. Products manufactured, imported, distributed and marketed in the national territory must be safe for the user and the environment.
Accordingly, Article 5 establishes that manufacturers and importers must ensure that the products placed on the market, free of charge or not, meet all the requirements of this Regulation. Also, the other participants in the production and supply chain must maintain the integrity of the product and its markings, thus preserving the compliance with the requirements of this Regulation.
All products in scope must comply with Brazilian technical standards ABNT NBR 14417:2011 AC supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements and ABNT NBR 14418:2011 AC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements. The certification of the products by an accredited body by Inmetro may facilitate proof of compliance with the minimum safety requirements.
Furthermore, ballasts certified in line with the provisions of Article 7(1) cannot bear the Conformity Identification Seal provided for by Portaria No. 267/2009. However, products manufactured and imported prior to 6 July 2020, certified in accordance with Portaria No. 267/2009, may be marketed bearing the Conformity Identification Seal until the end of the stock.
This Portaria shall come into force on 01 March 2021.
멕시코: 통신/무선
통신 및 무선 장비에 대한 적합성 평가 절차를 승인합니다. 2020년 2월 고시
승인됨(2021년 2월 25일 시행)
2020년 2월 25일, 연방전기통신연구소(IFT)는 전기 통신과 방송에 대한 적합성 평가 절차를 발표했습니다. 이 절차는 통신 네트워크에 연결하거나 무선 주파수를 사용할 수 있는 통신 및 무선 장비용 제품, 장비, 장치 및 인프라에 적용됩니다. 다음 네 가지 인증 체계가 구축됩니다.
a) 단일 배치에 대한 모델별 샘플,
b) 두 개 이상의 로트에 대한 모델별 및 감시 샘플을 채취합니다.
c) 제품 모델 및 보안 감시 제품군에 따라 샘플을 채취합니다.
d) 기기별, 감시별로 표본을 추출합니다. 이러한 체계를 통해 사물인터넷(IoT) 장치 및 단거리 무선 통신 장치 범위를 비롯한 다양한 제품에 대한 민첩하고 유연한 인증을 받을 수 있습니다. 상기 내용은 sector 의 다양성 에 따라 달라집니다.
본 고시에는 6개의 부록이 있으며, 이 부록은 다음과 같은 주제를 다룹니다.
• 부록 A제품 인증 요건입니다.
• 부록 B인증 요청입니다.
• 부록 C적합성 증명서입니다;
• 부록 D의견 요청;
• 부록 E검사 의견 형식입니다.
• 부록 F통신 및 방송과 관련된 보완적 기술 조항 및 멕시코 공식 표준(본 고시 발행일 기준)입니다.
이 계약에는 정의, 승인 유형, 승인 절차, 라벨 요구 사항 및 인증 설명이 포함됩니다. 이 고시 시행 전에 인증기관에서 발급한 적합성 증명서는 본 통신 및 방송 적합성 평가 절차의 조항에 따라 발급된 적합성 인증서의 모든 법적 효력을 가집니다. 마찬가지로, 참조된 적합성 증명서는 보유자에게 발급된 기간 동안 유효하며 연장할 수 없습니다.
이 고시는 발행일로부터 365 일 이내에 발효되며2005 년 8 월 11 일에 게시된 공식 관보에 게시 된 “ 연방 통신위원회를 통해 통신 및 교통부의 공식 멕시코 표준을 준수하는 제품의 적합성을 평가하는 절차"를 대체합니다.
멕시코: 전파 방출
전기통신제품의 비이온화 무선배출량 최대제한 준수를 위한 사양, 전자파 흡수율, 고시, IFT-012-2019
승인됨(2021년 2월 25일 시행)
본 기술 조항은 인체 근접도에서 측정한 특정 흡수 지수(SAR)에 따라 통신 네트워크에 연결하거나 30MHz ~ 6 범위의 무선 스펙트럼을 사용할 수있는 통신 제품, 장비 또는 장치의 무선 주파수 전자기 방사의 최대 제한을 준수하기위한 기술 사양을 설정합니다.
이 기술 조항은 다음 사항을 보장하기 위한 것입니다.
• 특히 300MHz ~ 6GHz의 주파수 범위에서 귀에 가까운 머리 부근에서 사용되는 이러한 제품은 비이온화 무선 주파수 전자기 방사선의 기본 노출 한계를 준수합니다.
• 인체에서 200mm 이하의 거리에서 사용되는 이러한 제품은 비이온화 무선 주파수 전자기 방사선의 기본 노출 한계를 준수합니다.
섹션 5에 설명된 테스트 방법을 통해 무선 통신 장치가 표 1에 명시된 기본 제한을 준수하는지 평가하고 검증할 수 있습니다.
기술 조항은 기본적으로 국제 비이온화 방사선 방호 위원회 "시간 변동 전기장, 자기장 및 전자기장 (최대 300 GHz)에 대한 노출을 제한하기 위한 지침" 외에 IEC 62209-1 및 IEC 62209-2와 연계되어 있습니다. 그러나 비이온화 방사선방호 국제위원회가 사용하는 통신 제품, 장비 또는 장치의 무선 주파수 전자파 최대 한계치에 대해 고려된 주파수 범위에서는 차이가 있습니다.
이 고시는 2021년 2월 25일부터 발효됩니다.
Publication References - DOF: 26/02/2020
필리핀 : 무선
2020년 2월 14일 업데이트에 따라 NTC는 Circular N0 03-05-2007 (첨부) 수정에 대한 고시를 발표했습니다.
이 고시는 비 특정 단거리 장치의 작동 주파수 대역과 관련됩니다.
2007 년 3 월 5 일부터 해당 고시에 대한 변경은 아래와 같습니다.
기존 MC No. 03-05-2007
315MHz.
새로운 수정
314.73 – 315.07MHz
새로운 고시는 No. 01-02-2020은 2020년 2월 29일에 발효됩니다.
태국: 안전
D.C. 또는 A.C.의 요건에 대한 표준 TIS 3002를 설정합니다. LED 모듈용 전자 제어 장치, 고시 No. 5659, 2020
시행 중입니다(2020년 3월 25일 이후)
2020년 3월 25일, 태국 산업부는 램프 제어 장치 part 2-13에 대한 산업 표준 TIS 3002-2562의 설립을 발표했습니다 - Part 2-13: Particular Requirements for D.C. or A.C. Supplied Electronic Control Gear For LED Modules
이 표준은 LED 모듈과 관련하여 1,000V 이하의 DC, AC 전원 (50Hz 또는 60Hz에서 교류) 이고 공급 주파수에서 벗어날 수 있는 출력 주파수에서 사용하기 위한 전자식 제어 장치에 대한 특정 안전 요구 사항을 명시합니다.
또한 이 표준에는 해당 제품에 대한 정의, 분류, 테스트 방법 및 표시 등이 포함됩니다.
IEC 61347-1의 부록은 이 표준과 함께 사용되며, 성능 요건은 IEC 62384에서 다룹니다.
이 고시는 2020년 3월 25일에 발효되었습니다.
Publication References - Thai Government Official Gazette No. 137/70, 25.03.2020
태국: 안전
액체 가열 장치의 산업 제품 표준, 고시 번호 5510, 2019
시행 중입니다(2020년 3월 26일 이후)
2019년 12월 27일, 태국 산업부는 커피 메이커, 조리 팬, 계란 삶는 기기, 주전자와 같은 액체 가열 전기 장치의 안전 요구 조건을 규정한 TIS 2439:2559 제품 표준의 발행을 발표했습니다. 산업 제품 표준법에 따라 공식화된 이 표준은 주로 해당 제품에 관련된 용어와 정의, 참조, 일반 요건, 표시/표시 및 시험을 규정합니다.
이 통지는 2020년 3월 26일부터 시행됩니다.
Publication References - Thai Government Official Gazette No. 136/316D, 27.12.2019
[영어 원문]
Mexico: telecom/wireless
Approving the Conformity Assessment Procedure for Telecommunications and Radio Equipment, Agreement, February 2020
Approved (coming into force on Feb 25, 2021)
On 25 February 2020, the Federal Telecommunications Institute (IFT) published a conformity assessment procedure for telecommunications and broadcasting. This procedure is applicable to products, equipment, devices, and infrastructure for telecommunications and radio equipment that can be connected to a telecommunications network and / or make use of the radio spectrum. Four certification schemes are established:
a) Sample by model for a single batch,
b) Sample by model and surveillance for more than one lot,
c) sample by family of product models and surveillance, and
d) sample by device and surveillance. These schemes will allow an agile and flexible certification of various products, including Internet of Things (IoT) devices and short-range radio communication devices scope. The above according to the dynamism of the sector
The Agreement has 6 Annexes, which deal with its following themes:
The Agreement contains definitions, approval types, approval procedures, labeling requirements and clarification of certification. Certificates of Conformity issued by the Certification Bodies before the entry into force of this ordinance will have all the legal effects of the Certificates of Conformity issued under the terms of this Conformity Assessment Procedure for Telecommunications and Broadcasting. Likewise, the referred Certificates of Conformity will remain in force in the terms in which they were issued to the holder and cannot be extended.
The Agreement will enter into force within 365 natural days from publication and will replace the "Procedures for assessing the conformity of products subject to compliance with official Mexican standards under the Ministry of Communications and Transport through the Federal Telecommunications Commission", published in the Official Gazette of the Federation on 11th August 2005.
Mexico: radio emission
Specifications for Compliance with the Maximum Limits for Non-Ionizing Radio Emissions from Telecommunications Products, Specific Absorption Rate, Agreement, IFT-012-2019
Approved (coming into force on Feb 25, 2021)
This Technical Provision establishes the technical specifications for compliance with the maximum limits of radiofrequency electromagnetic radiations of telecommunications products, equipment, or devices that can be connected to a telecommunications network and/or make use of the radio spectrum in the range of 30 MHz to 6 GHz, using the specific absorption index (SAR) measured in the proximity of the human body.
This Technical Provision aims to ensure that:
The test methods described in Section 5 allow evaluation and verification that wireless communication devices comply with the basic limits established in Table 1.
The technical provisions are basically aligned with IEC 62209-1 and IEC 62209-2, in addition to the International Commission on Non-Ionizing Radiation Protection, "Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields (up to 300 GHz)". It differs however in the frequency range considered for the maximum limits of radio frequency electromagnetic radiation of telecommunications products, equipment or devices used by the International Commission on Non-Ionizing Radiation Protection.
The Agreement will enter into force on 25 February 2021.
Philippines: wireless
Upon updates on 14th February 2020, NTC had issued formal memorandum on amendment of Circular N0 03-05-2007 (attached).
This Memorandum Circular relates to the operating frequency band for non-specific Short-Range Devices.
The minor changes for this circular from 03-05-2007
Existing MC No. 03-05-2007
315 MHZ.
New Amendment
314.73 – 315.07 MHz
The new Memorandum Circular No. 01-02-2020 will be effective on 29th February 2020
Thailand: safety
Establishment of Standard TIS 3002 on Requirements for D.C. or A.C. Supplied Electronic Control Gear For LED Modules, Announcement No. 5659, 2020
In force (since Mar 25, 2020)
On 25 March 2020, the Thai Ministry of Industry announced the establishment of industrial standard TIS 3002−2562 on Lamp Control Gear- Part 2-13: Particular Requirements for D.C. or A.C. Supplied Electronic Control Gear For LED Modules under the Industrial Product Standards Act.
This standard set out specific safety requirements for electronic control gear for use on DC, AC supplies not more than 1, 000 V (alternating current at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, with regard to LED modules.
The standard also includes definitions, classification, test methods and marking for the said products, etc.
Annex of IEC 61347-1 is used in conjunction with this standard, and performance requirements are covered by IEC 62384.
The Announcement entered into force on 25 March 2020.
Thailand: safety
Industrial Product Standard for Liquid Heating Appliances, Notice No. 5510, 2019
In force (since Mar 26, 2020)
On 27 December 2019, the Thai Ministry of Industry announced the issuance of TIS 2439:2559 product standard laying down safety requirements of liquid heating electrical appliances such as coffee maker, cooking pan, egg boiler, kettles and other appliances for boiling water, pressure cooker, rice cooker, slow cooker, steamer, yoghurt maker, etc.
This standard formulated under the Industrial Product Standards Act, mainly sets out terms and definitions, references, general requirements, general conditions for marking/labelling and testing related to the said products.
The Notice will enter into force on 26 March 2020.
파나마: 에너지 효율
DGNTI-COPANIT 105:2017 냉장고 및 냉동기의 에너지 효율 및 라벨 부착 요건에 관한 기술 규정 승인, 2018년 결의 제 31호 - 수정 - (제외 사항의 명확화에 관한) 고시 No. 04, 2021
시행 중(2021년 1월 22일 이후)
2020년 1월 22일 파나마 산업부는 냉장고와 냉동고의 에너지 효율 및 라벨링 요구사항에 관한 기술 규정 승인에 관한 고시 제 31/2018호를 개정하기 위한 고시 제 04/2021호를 발표했습니다.
본 결의안은 요구 사항 범위에서 제외된 가전 제품을 정확하게 표시하기 위해 기술 규정 DGNTI-COPANIT 105:2017의 포인트 2(범위)를 개정합니다.
● 최소 용량 25L의 하나 이상의 도어가 있는 수직 냉각기;
● 최소 용량 50L의 수평 냉각기;
● 최소 용량 50L의 수평 냉동고(medical 포함)
● 최소 용량 50L의 수직 냉동고
● 최소 용량 100L의 closed cabinets
● 최소 100L 용량의 아이스팩 키퍼
● 냉각실 또는 냉동실;
● 음료 디스펜서가 있는 냉각기;
● 문이 없는 냉각기;
● 결합형/2in1 냉각기/냉장고;
■ 원격 냉동 장비, 와인 냉각기, 와인 셀러, 워터 쿨러, 정수기 및 제빙기 등이 있습니다.
이 결의안은 2021년 1월 22일에 발효되었습니다.
Publication References - Gaceta Oficial No 29203, 22.01.2021
호주: 에너지 효율
온실 및 에너지 최소 표준 (65kW 이상의 에어컨), 고시, 2022년 4월입니다.
승인됨(2022년 4월 1일 시행)
원본의 텍스트에서 추출했습니다.
"(1) 법 제 28조의 경우, 본 고시에서 적용되는 특정 제품 클래스에 대해 다음과 같은 경우 두 개 이상의 모델이 동일한 모델 제품군에 속합니다.
(a) 이들은 GEMS 규제기관에 함께 파생으로 등록되어 있습니다.
(b) 본 섹션의 요구 조건은 모델 및 제품군과 관련하여 충족됩니다.
(2) (1)항의 경우, 모델은 다음을 수행해야 합니다.
(a) 동일한 제품 등급에 속합니다.
(b) 제3부 및 제5부 준수와 관련된 에너지 성능 특성은 동일하며, 다음을 포함하되 이에 국한되지는 않습니다.
(i) 전기 단계
(ii) 평균 참 전력 계수
(iii) 정격 전력 입력
(iv) 정격 용량
(c) 제3부, 제4부 및 제5부 준수와 관련된 동일한 물리적 특성을 가지고 있습니다.
(d) 법 제41조에 따라 작성되고 있는 모델에 대한 등록 신청에 앞서 작성된 단일 시험 보고서에 포함되어야 합니다.
(3) (1)항의 경우 한 기본 모델에 10개 이상의 파생모델을 포함할 수 없습니다."
태국: 안전
전기 모터 작동식 휴대용 공구, 운반용 공구, 잔디 및 정원 기계류에 대한 산업 표준 TIS 62841-2(10)의 제정 - 안전 - 제2-10부: 핸드 믹서에 대한 특별 요구사항, 고시 5894, 2021
시행 중(2021년 1월 21일 이후)
이 고시는 2021년 1월 21일 태국 산업부에서 즉시 발효한 것으로, 전기 모터 작동식 휴대용 공구, 운반 가능한 공구, 잔디 및 정원 기계 - 안전 - 2-10에 대한 산업 표준 TIS 62841 Part 2(10)-2563을 제정합니다 - 산업 제품 표준법에 따른 휴대용 믹서에 대한 특정 요구 사항.
이 표준은 IEC 62841-1:2014를 기반으로 하며 액체를 사용하기 때문에 공구로 간주되지 않는 믹서에 대해 포함합니다. 해당 표준은 믹서로 사용할 수 있더라도 드릴 및 임팩트 드릴에는 적용되지 않습니다.
또한 이 기준서는 범위, 정의, 일반 요구사항, 시험, 방사선, 독성 및 유사한 위해성, 분류, 표시, 열/연소/습기/녹에 대한 저항, 내구성, 오작동, 기계적 위험 및 강도 등을 제공합니다.
Publication References - Thai Government Official Gazette No. 138/16, 21.01.2021, p. 19
가정용 및 유사 전기 장치에 대한 산업 표준 TIS 60335-2(98)의 확립 - 안전 - 파트 2-98: 가습기에 대한 특별 요구사항, 고시 5927, 2021
시행 중(2021년 1월 25일 이후)
이 발표는 태국 산업부가 2021년 1월 25일 즉시 발효한 것으로, 산업 제품 표준법에 따라 가정용 및 유사 전기 제품에 대한 산업 표준 TIS 60335 제2(98)-2563편 - 안전 - 제2-98편: 가습기에 대한 특별 요구 사항을 제정한 것입니다.
이 표준은 가정용 및 이와 유사한 사용을 위한 전기 가습기의 안전성에 대해 다루며, 정격 전압은 단상 250V 이하이고 다른 기기의 경우 정격 전압은 480V 이하입니다. 다른 가전제품의 예로는 분무하는 가전제품, 가열을 통해 물을 증발시키는 가전제품, 습한 원소를 통해 공기를 불어내는 가전제품 등이 있습니다.
또한 이 표준은 범위, 기준, 정의, 일반 요구사항, 시험, 분류, 표시 및 라벨링, 습도에 대한 저항, 강도, 내구성, 오작동, 안정성 및 기계적 위해성, 구조, 녹에 대한 저항 등에 관한 조항으로 구성됩니다.
Publication References - Thai Government Official Gazette No. 138/18, 25.01.2021, p.10
가정용 및 유사 전기 장치의 산업 제품 표준 - 안전 파트 2(45): 휴대용 난방 도구 및 유사 장치의 특별 요구 사항, 고시 5942, 2021
승인됨(2021년 5월 25일 시행)
2021년 1월 25일, 태국 산업부는 가정용 및 유사한 전기 기기, 특히 휴대용 난방 도구와 유사한 기기, TIS 60335 Vol. 2(45)-2563의 안전을 위한 제품 표준 2부를 발행한다고 발표했습니다.
이 표준은 1968년 제품 표준법에 따라 발행되었으며, 최대 전압 250V의 휴대용 난방 장비 및 기타 전기 장치에 유사한 목적으로 적용됩니다. 시험, 분류, 표시 및 라벨 표시에 대한 일반적인 요건 및 조건뿐만 아니라 범위, 참조 정보, 관련 정의도 명시되어 있습니다.
해당 고시는 2021년 5월 25일 정부 관보에 게재된 지 120일 후에 시행될 예정입니다.
Publication References - Official Gazette of Thailand Government No. 138/18, 25.01.21
오디오/비디오, 정보통신 기술 장비에 대한 산업 표준 TIS 62368-1의 확립 - 제1부: 안전 요구사항, 고시 5883, 2021
시행 중(2021년 1월 21일 이후)
본 고시는 태국 산업부가 2021년 1월 21일 즉시 발효한 것으로, 산업 제품 표준법에 따라 오디오/비디오, 정보통신 기술 장비에 대한 산업 표준 TIS 62368(1) - 2564 - 제1부: 안전 요구 사항을 제정합니다.
이 표준은 IEC 62368-1을 기반으로 발행되었으며, 오디오, 비디오, 정보통신 기술 분야 및 정격 전압이 600V를 초과하지 않는 비즈니스 및 사무용 기계의 안전 특성을 제공합니다. 이 표준에는 장비의 성능 또는 기능 특성에 대한 요구사항이 포함되어 있지 않습니다.
또한 에너지원을 분류하고, 해당 에너지원에 대한 안전장치를 규정하며, 이러한 안전장치의 적용 및 요건에 대한 지침을 제공합니다.
마지막으로, 이 고시는 일반규약, 제품안전기준의 원칙, 범위, 참고문서, 정의, 일반요건, 전기로 인한 부상, 전기로 인한 화재, 유해물질 등으로 구성되어 있습니다.
Publication References - Thai Government Official Gazette No. 138/16, 21.01.2021, p.36
전기 모터 작동식 휴대용 공구, 운반 가능한 공구, 잔디 및 정원 기계에 대한 산업 표준 TIS 62841-1의 확립 - 안전 - 제1부: 일반 요구사항, 고시 5887, 2021
시행 중(2021년 1월 21일 이후)
본 고시는 2021년 1월 21일 태국 산업부에서 즉시 발효한 것으로, 전기 자동차용 휴대용 공구, 운반 가능한 공구, 잔디 및 정원 기계 - 안전 제1부: 산업 표준에 따라 산업 표준 TIS 62841(1) - 2563을 제정합니다.
이 표준은 휴대용 장비(IEC 62841-2), 운반 가능한 공구(IEC 62841-3), 농장 및 잔디 기계(IEC 62841-4), 전기 모터 작동 또는 자력으로 구동되는 안전 요구 사항을 제공합니다.
이러한 유형의 제품을 표준에서 "도구" 또는 "기계"라고 하며 다음과 같은 특성을 가지고 있습니다.
●단상 AC 또는 DC 제품의 정격 전압이 250V를 초과하지 않습니다.
● 3상 AC 제품의 경우 480V입니다.
● 정격 입력전원이 3,700W를 초과하지 않습니다.
표준은 다음 사항을 다룹니다.
● 주 전원 공급 장치의 비접촉식 모터에 대한 요구 사항입니다.
● 배터리 공구 사용 제한 사항입니다.
● 전기 가열 소자가 있는 공구입니다.
● 고정 공구로 사용하기 위해 지지대 또는 작업대에 장착할 수 있는 휴대용 공구입니다.
이 표준에는 다음이 포함되지 않습니다.
● 폭발성 대기에서 사용하는 장비
● 조리 및 준비 기계
● 의료용 공구
마지막으로, 이 기준서는 일반조항, 범위, 참고문서, 정의, 일반요건, 일반요건, 시험, 방사선, 독성 및 유사한 위해요건, 분류, 표시, 열/연소/습기에 대한 저항성, 기계적 강도, 시공 등으로 구성되어 있습니다.
Publication References - Thai Government Official Gazette No. 138/16, 21.01.2021, p.40
50V 이상의 전압에 의한 일반 조명용Self-Ballasted LED 램프에 대한 산업 표준 TIS 2780을 제정합니다. 안전 사양, 고시 5866, 2021
본 고시는 2021년 1월 21일 태국 산업부가 발표한 것으로, 산업 제품 표준법에 따라 50V 이상의 전압에 의한 일반 조명 서비스용 자체발광 LED 램프에 대한 산업 standard TIS 2780-2562를 제정한 것입니다.
이 표준은 가정용 및 유사한 일반 조명 목적으로 설계된 밸러스트가 내장된 LED 램프에 대한 테스트 방법 및 테스트 조건뿐만 아니라 안전성 요구사항을 정의합니다. 이 standard의 요건은 type 시험과 관련이 있습니다.
이 표준(standard) 은 다음 범위의 해당 제품에 적용됩니다.
● 정격 전원은 60W를 초과하지 않습니다.
● 정격 전압이 50V~250V를 초과합니다.
마지막으로, 해당 표준(standard) 은 범위, 기준, 정의, 일반 요구사항, 테스트, 표시, 상호교환성, 절연 저항, 전기 강도, 기계적 강도, 캡 온도 상승, 내열성, 불꽃 및 인화성 저항으로 구성됩니다.
시행일은 장관령에 의해 결정될 것입니다.
Publication References - Thai Government Official Gazette No. 138/16, 21.01.2021, p. 19
가정용 및 유사 전기 장치에 대한 산업 표준 TIS 60335-2(98)의 확립 - 안전 - 파트 2-98: 가습기에 대한 특별 요구사항, 발표 번호 5927, 2021
시행 중(2021년 1월 25일 이후)
이 발표는 태국 산업부가 2021년 1월 25일 즉시 발효한 것으로, 산업 제품 표준법에 따라 가정용 및 유사 전기 제품에 대한 산업 표준 TIS 60335 제2(98)-2563편 - 안전 - 제2-98편: 가습기에 대한 특별 요구 사항을 제정한 것입니다.
이 표준은 가정용 및 이와 유사한 사용을 위한 전기 가습기의 안전성에 대해 다루며, 정격 전압은 단상 250V 이하이고 다른 기기의 정격 전압은 480V 이하입니다. 다른 가전제품의 예로는 분무하는 가전제품, 가열을 통해 물을 증발시키는 가전제품, 습한 원소를 통해 공기를 불어내는 가전제품 등이 있습니다.
또한 이 표준은 범위, 기준, 정의, 일반 요구사항, 시험, 분류, 표시 및 라벨링, 습도에 대한 저항, 강도, 내구성, 오작동, 안정성 및 기계적 위해성, 구조, 녹에 대한 저항 등에 관한 조항으로 구성됩니다.
Publication References - Thai Government Official Gazette No. 138/18, 25.01.2021, p.10
고정 범용 발광체에 대한 산업 표준 TIS 902-2(1)를 제정합니다. 고시5929, 2021
승인됨(2021년 5월 25일 시행)
태국 산업부가 2021년 1월 25일 발간한 이 발표는 산업제품 표준법에 따라 고정 범용 발광체에 관한 산업 표준 TIS 902 제2(1)부-2563호를 제정합니다.
이 표준은 공급 전압이 1,000V를 초과하지 않는 전기적으로 작동하는 범용 고정 조명기구에 필요한 특성을 다룹니다.
범위, 정의, 시험 요건, 조명기구의 일반적인 분류, 시공, 표시 및 라벨링, 내구성, 먼지 저항, 수분 및 절연 저항, 전기 강도, 열 및 화재에 대한 저항 등으로 구성됩니다.
본 발표는 2021년 5월 25일부터 시행됩니다.
Publication References - Thai Government Official Gazette No. 138/18, 25.01.2021, p.12
우크라이나: 에너지 효율
전문가용 냉장 보관 저장고의 에너지 라벨 부착 요건에 대한 기술 규정 승인, 고시 683, 2020
승인됨(2021년 7월 04일 시행)
2020년 10월 26일, 우크라이나 에너지부는 전문가용 냉장 보관 저장고에 대한 에너지 라벨 부착 요건을 확립하는 기술 규정(TR)을 승인하는 고시 683을 채택했습니다.
해당 기술 규정은 전문가용 냉장 보관 저장고의 에너지 라벨 표시와 관련하여 지침 2010/30/EU를 보완하는 2015년 5월 5일 위임 규정(EU) 2015/1094를 모델로 합니다.
해당 고시는 전문가용 냉장 보관 저장고의 라벨 부착 및 보조 제품 정보 제공에 대한 요건을 설정합니다. 본 제품은 식품 및 동물 사료용으로 판매되는 것을 포함하여 주 전원으로 작동하는전문가용 냉장 보관 저장고에 적용해야 합니다.
기술 규정의 II절에는 전문가용 냉장 보관 저장고를 시장에 내놓거나 서비스를 제공하는 공급업체가 다음 요구 사항을 충족하는지 확인해야 한다고 명시되어 있습니다.
■ 각 전문가용 냉장 보관 저장고에 대해 부속문서 3에 명시된 정보를 포함하는 인쇄된 라벨이 제공되어야 합니다.
■ 부록 3에 명시된 정보를 포함하는 형식의 전자 라벨은 각 전문가용 냉장 보관 저장고에 대해 대리점에서 사용할 수 있어야 합니다.
■ 부속서 4에 규정된 대로 제품의 fiche 가 있어야 합니다.
■ 부속서 4에 명시된 대로 전자 제품 피시가(fiche) 각 전문 냉장 보관 캐비닛 모델에 대해 판매자 에게 제공되어야합니다.
■ 부록 5에 명시된 기술 문서가 있어야 합니다.
■ 특정 전문 냉장 보관 캐비닛 모델과 관련된 광고 및 에너지 관련 정보 또는 가격 정보는 해당 모델의 에너지 효율 등급에 대한 참조를 포함해야 합니다.
■ 특정전문가용 냉장 보관 저장고 제품과 관련된 기술 홍보 자료 및 이의 특정 기술 매개변수를 기술하는 자료는 해당 모델의 에너지 효율 등급에 대한 참조를 포함해야 합니다.
시장에 출시된 각 전문 냉장 보관 캐비닛에는 다음 일정에 관련하여 라벨이 부착되어야 합니다.
■ 2021년 7월 4일 이후: 부속서 3의 지점 1 또는 2에 따른 라벨
■ 2024년 1월 4일 이후: 부속서 3의 지점 2에 따라 라벨을 부착합니다.
또한 전문가용 냉장 보관 저장고 판매자는 III절에 명시된 요건을 충족해야 합니다.
부록 6에서는 인터넷을 제외하고 최종 사용자가 제품의 정보를 확인 하는것을 예상할 수 없는 경우 제공할 정보를 설정합니다.
부록 7에는 인터넷을 통한 판매, 임대 또는 임대 구매의 경우에 제공되는 정보가 나와 있어야합니다.
마지막으로, 기술 규정은 본 고시가 발효되기 전에 유통되기 시작한 모든 비호환 제품의 마케팅에 대해 6개월의 경과 기간을 제공합니다.
본 고시는 2021년 7월 4일부터 시행됩니다.
Publication References - Official Gazette of Ukraine No. 1, 04.01.2021, p. 390
이스라엘: 인증서 유효기간
무선 장치 라이센스의 유효성을 연장합니다. 임시 고시, 고시 5721-2021
시행 중(2021년 1월 14일 발행)
해당 고시는 2020년 9월 1일 이후 만료되었거나 2021년 9월 30일까지 만료되는 면허 또는 증명서를 3-12개월 동안 추가 지불하지 않고 자동으로 연장하도록 규정하고 있습니다.
1972년 무선 전신 조례(새 버전), 1982년 통신법(라디오 및 방송) 및 1986년 우편법에 따라 발급된 면허 및 증명서에 적용됩니다. 그러나, 그것은 민간 행정 기관의 등록체가 허가한 규제 면허 및 승인에는 적용되지 않습니다.
인증서의 유효기간 연장 기간은 라이센스 기간에 따라 달라집니다.
■ 총 1년까지 지속되는 라이센스는 3개월 연장됩니다.
■ 1년에서 3년 사이의 라이센스가 6개월 연장됩니다.
■ 3년 이상 허가된 라이센스는 12개월 연장됩니다.
이 임시 고시는 기존 라이센스에만 적용됩니다. 신규 지원자는 통상적인 수수료의 적용을 받습니다.
2021년부터 2021년까지의 기간 동안 갱신 비용을 이미 지불한 사람은 [email protected]으로 이메일을 보내 다음 정보를 제공하여 부분 환불을 청구할 수 있습니다.
■ 가입명
■ 가입번호
■ 지급일
■지급액
■ 이메일 주소입
■ 휴대폰 번호
지불 확인서 및 신분증도 첨부해야 합니다.
[영어 원문]
Panama: energy efficiency
Approving Technical Regulation DGNTI-COPANIT 105:2017 on Energy Efficiency and Labelling Requirements of Refrigerators and Freezers, Resolution No. 31, 2018 - Amendment - (on clarification of exclusions) Resolution No. 04, 2021
In force (since Jan 22, 2021)
On 22 January 2020 the Panamanian Ministry of Trade and Industry published the Resolution No 04/2021 to amend Resolution No. 31/2018 on Approving Technical Regulation DGNTI-COPANIT 105:2017 on Energy Efficiency and Labelling Requirements of Refrigerators and Freezers.
This Resolution amends Point 2 (Scope) of Technical Regulation DGNTI-COPANIT 105:2017 in order to provide a precise indication of the appliances that are excluded from the scope of the requirements:
This Resolution entered into force on 22 January 2021.
Australia: energy efficiency
Greenhouse and Energy Minimum Standards (Air Conditioners above 65kW), Determination, April 2022
Approved (coming into force on Apr 01, 2022)
Extracted from the text of the Source:
"(1) For section 28 of the Act, for a particular product class covered by this Determination, two or more models are in the same family of models if:
(a) they are members of a family that has been declared to the GEMS Regulator; and
(b) the requirements of this section are satisfied in relation to the models and the family.
(2) For subsection (1), the models must:
(a) be in the same product class; and
(b) have the same energy performance characteristics relevant to complying with Part 3 and Part 5, including, but not limited to:
(i) electrical phase; and
(ii) average true power factor; and
(iii) rated power inputs; and
(iv) rated capacities; and
(c) have the same physical characteristics that are relevant to complying with Part 3, Part 4 and Part 5; and
(d) be included on a single test report which was prepared prior to the application for registration for the model being made under section 41 of the Act.
(3) For subsection (1), a family must not contain more than 10 models."
Thailand: safety
Establishment of Industrial Standard TIS 62841-2(10) on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-10: Particular Requirements for Hand-Held Mixers, Announcement No. 5894, 2021
In force (since Jan 21, 2021)
This Announcement issued with immediate effect on 21 January 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 62841 Part 2(10)-2563 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-10: Particular Requirements for Hand-Held Mixers, in accordance with the Industrial Product Standards Act.
The Standard is based on IEC 62841-1:2014 and covers mixers that are not considered to be tools with a liquid system. The Standard does not apply to drills and impact drills, even if they can be used as a mixer.
The Standard also provides scope, definitions, general requirements, general conditions for testing, radiation, toxicity and similar hazards, classification, marking, resistance to heat/combustion/moisture/rust, durability, malfunction, mechanical hazards and strength, etc.
Thailand: safety
Establishment of Industrial Standard TIS 902-2(5) on Floodlights, Announcement No. 5391, 2021
Approved (coming into force on May 25, 2021)
On 25 January 2021, the Thai Ministry of Industry announced the issuance Industrial Standard TIS 902 Part 2(5) - 2563 on floodlights, in accordance with the Industrial Product Standards Act.
The standard applies to floodlights for use with electrical light sources on supply voltages not exceeding 1 000 V. It sets out the scope, definitions, marking, protection against electric shock, durability, testing, resistance to heat/moisture/dust, electrical/thermal resistance etc.
The Announcement will enter into force 120 days after its publication in the Government Gazette, on 25 May 2021
Thailand: safety
Industrial Product Standard for Household and Similar Electrical Appliances - Safety Part 2 (45): Particular Requirements for Portable Heating Tools and Similar Appliances, Notice No. 5942, 2021
Approved (coming into force on May 25, 2021)
On 25 January 2021, the Thai Ministry of Industry announced the issuance of part 2 of a product standard for the safety of household and similar electrical appliances, particularly portable heating tools and similar appliances, TIS 60335 Vol. 2 (45) −2563.
The standard was issued under the Product Standards Act, 1968, and applies to portable heating equipment and other electrical appliances for similar purposes with a maximum voltage of 250 V. It sets out the scope, reference information, relevant definitions, as well as general requirements and conditions for testing, classification, marking and labelling.
It will enter into force 120 days after its publication in the Government Gazette, on 25 May 2021.
Ukraine: energy efficiency
Approving Technical Regulations on Energy Labelling Requirements for Professional Refrigerated Storage Cabinets, Order No. 683, 2020
Approved (coming into force on Jul 04, 2021)
On 26 October 2020, the Ukrainian Ministry of Energy adopted Order No. 683 approving Technical Regulations (TR) establishing energy labelling requirements for professional refrigerated storage cabinets.
The Technical Regulations are modelled on Commission Delegated Regulation (EU) 2015/1094 of 5 May 2015 supplementing Directive 2010/30/EU with regard to the energy labelling of professional refrigerated storage cabinets.
They establish requirements for the labelling and the provision of supplementary product information of professional refrigerated storage cabinets. They shall apply to electric mains-operated professional refrigerated storage cabinets, including those sold for the refrigeration of foodstuffs and animal feed.
Section II of the Technical Regulations stipulates that suppliers placing professional refrigerated storage cabinets on the market or putting them into service shall ensure that the following requirements are met:
Each professional refrigerated storage cabinet placed on the market shall be accompanied by labels with respect to the following timetable:
Furthermore, dealers of professional refrigerated storage cabinets shall meet requirements set out in Section III.
Annex 6 establishes information to be provided where end-users cannot be expected to see the product displayed, except on the internet.
Annex 7 lists the information to be provided in the case of sale, hire or hire-purchase through the internet.
Finally, the Technical Regulations provide a six month transitional period for the marketing of all non-compliant devices put into circulation before the entry into force of this Order.
This Order enters into force on 4 July 2021.
Thailand: safety
Establishment of Industrial Standard TIS 62368-1 on Audio/Video, Information and Communication Technology Equipment - Part 1: Safety Requirements, Announcement No. 5883, 2021
In force (since Jan 21, 2021)
This Announcement issued with immediate effect on 21 January 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 62368 (1) - 2564 on Audio/video, Information and Communication Technology Equipment - Part 1: Safety Requirements, in accordance with the Industrial Product Standards Act.
The Standard was issued based on IEC 62368-1, and provides for safety characteristics of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. The standard does not include requirements for performance or functional characteristics of equipment.
It also classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards.
Lastly, the Standard consists of general provisions, principles of product safety standards, scope, reference documents, definitions, general requirements, injury caused by electricity, fire caused by electricity, and injuries caused by hazardous substances, etc
Thailand: safety
Establishment of Industrial Standard TIS 62841-1 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 1: General Requirements, Announcement No. 5887, 2021
In force (since Jan 21, 2021)
This Announcement issued with immediate effect on 21 January 2021 by the Thai Ministry of Industry, establishes the Industrial standard TIS 62841 (1) - 2563 on Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety-Part 1: General Requirements, in accordance with the Industrial Product Standards Act.
The standard provides for safety requirements of hand-held equipment (IEC 62841-2), transportable tools (IEC 62841-3), and farm and lawn machinery (IEC 62841-4), electric motor-operated or magnetically driven.
These types of products are referred as "tools" or "machines" in the standard and have the following characteristics:
The standard covers:
The standard does not cover:
Lastly, the Standard consists of general provisions, scope, reference document, definitions, general requirements, general conditions for testing, radiation, toxicity and similar hazards, classification, marking, resistance to heat/burning/moisture, mechanical strength, and construction, etc.
Thailand: safety
Establishment of Industrial Standard TIS 2780 on Self-Ballasted LED-Lamps for General Lighting Services by Voltage Higher than 50 V - Safety Specifications, Announcement No. 5866, 2021
Issued on 21 January 2021 by the Thai Ministry of Industry, this Announcement establishes Industrial Standard TIS 2780-2562 on Self-Ballasted LED-Lamps for General Lighting Services by Voltage > 50 V - Safety Specifications, in accordance with the Industrial Product Standards Act.
The Standard defines safety requirements as well as the test method and test conditions for LED lamps with a built-in ballast, that are intended for domestic and similar general lighting purposes. The requirements of this standard relate to type testing.
The Standard applies to the said products with the following scope:
Lastly, the standard consists of scope, reference, definitions, general requirements, testing, marking, interchangeability, insulation resistance, electrical strength, mechanical strength, cap temperature rise, heat resistance, flame and flammability resistance.
The effective date will be determined by Ministerial Regulation.
Establishment of Industrial Standard TIS 60335-2(98) on Household and Similar Electrical Appliances - Safety - Part 2-98: Particular Requirements for Humidifiers, Announcement No. 5927, 2021
In force (since Jan 25, 2021)
This Announcement issued with immediate effect on 25 January 2021 by the Thai Ministry of Industry, establishes Industrial Standard TIS 60335 Part 2(98)-2563 on Household and Similar Electrical Appliances - Safety - Part 2-98: Particular Requirements for Humidifiers, in accordance with the Industrial Product Standards Act.
The Standard deals with the safety of electric humidifiers for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of other appliances include appliances that atomise water, appliances that evaporate water by heating and appliances that blow air through a moist element.
The Standard also consists of scope, references, definitions, general requirements, testing, classification, marking and labelling, provisions on resistance to humidity, strength, durability, malfunction, stability and mechanical hazards, structure, resistance to rusting, etc.
Establishment of Industrial Standard TIS 902-2(1) on Fixed General Purpose Luminaires, Announcement No. 5929, 2021
Approved (coming into force on May 25, 2021)
Published on 25 January 2021 by the Thai Ministry of Industry, this Announcement establishes Industrial Standard TIS 902 Part 2(1)-2563 on Fixed General Purpose Luminaires, in accordance with the Industrial Product Standards Act.
The Standard deals with required characteristics for fixed luminaires for general purposes that are electrically operated, with a supply voltage not exceeding 1,000V.
It consists of scope, definitions, requirements for testing, general classification of luminaires, construction, marking and labelling, durability, dust resistance, moisture and insulation resistance, electric strength, resistance to heat and fire, etc.
This Announcement will enter into force on 25 May 2021.
Israel: certificate validity
Extending the Validity of Licenses for Wireless Devices, Temporary Order, Law 5721-2021
In force (published on Jan 14, 2021)
This Law provides that licenses or certificates which have expired since September 1, 2020 or will expire by September 30, 2021 are automatically extended, without requiring payment, for a period of 3-12 months.
It applies to licenses and certificates issued under the Wireless Telegraph Ordinance (New Version), 1972, the Communications (Radio and Broadcasting) Law, 1982, and the Postal Law, 1986. It does not, however, apply to regulatory licenses and approvals granted by an officer in the Civil Administration.
The length of the extension will depend on the duration of the license:
This Temporary Order only applies to pre-existing licenses. New applicants will be subject to the usual fees.
Those who have already paid the renewal costs for the period 2021-2022 are entitled to a partial refund which may be claimed by emailing [email protected] and providing the following information:
Confirmation of payment and proof of identification must also be attached.
[러시아: 에너지 효율]
조명용 AC 회로에 사용되는 조명 장치 및 전등의 요건 승인, 해상도 고시 No. 2255, 2020
2020년 12월 24일, 러시아 연방 정부는 조명용 AC 회로에 사용되는 조명 장치와 전등에 대한 에너지 효율 요건을 승인하는 고시 2255호를 발행했습니다.
해당 고시는 일반 램프, 특정 유형의 형광등, 백열등, LED 램프 및 고압 램프의 에너지 효율 요구 사항과 해당 제품에 대한 성능 요구 사항을 제공합니다.
제1조에 따르면 해당 요건은 다음 사항에 적용되지 않습니다.
제31조에 따라, 제품의 적합성 평가는 공인 시험소의 시험 보고서 또는 제조자의 선언을 통해 입증되어야 합니다.
해당 고시는 2021년 1월 1일에 발효되었으며, TR EAEU 048/2019 발효일(즉, 2022년 1월 23일, 에너지 소비 장치의 에너지 효율 요건에 대한 EAEU 기술 규정 발효 이후) 이후 24개월 후에 효력을 상실합니다.
[터키: 안전]
배터리 및 축전지에 대한 수입 제어, Communique 2021/15 제품 안전 및 검사를 수행합니다.
2020년 12월 31일, 터키 경제부는 부속서 1에 열거된 배터리와 축전지의 수입 통제에 관한 원칙과 절차에 관한 Communiqué를 발행했습니다.
본 고시는 자유 순환제를 위한 방출(Release for Free Circulation Regime)의 적용을 받기 위해 부속문서 1에 명시된 제품을 다루며, 외부 처리 체제에 따라 수출 및 반품되는 상품은 다루지 않습니다.
배터리 및 축전지의 수입 제어와 관련된 모든 거래는 TAREKS(위험 기반 제어 시스템) 위험 분석에 따라 수행되어야 합니다.
본 Commissique의 범위 내에서 제품을 수입하고자 하는 기업은 반드시 환경 준수 허가를 받아야 합니다.
본Commissique의 적용범위에 포함되는 수입품은 어떠한 경우에도 폐기물 배터리 및 축전지 제어 규정 등을 포함한 모든 관련 법규를 준수해야 합니다.
Communiqué는 다음에 대한 조항도 다룹니다.
터키 통상부의 설명에 따르면, "A.TR은 관세동맹 산하 우대체제의 혜택을 받기 위해 터키와 지역사회에서 상품을 무료로 유통하도록 설정된 문서입니다. 그것은 상품이 자유롭게 유통되고 있다는 것을 나타내며, 그것은 그 원산지를 증명하기 위한 것이 아닙니다."
또 다른 중요한 정의는 TAREKS(Risk-Based Trade Control System)입니다. 부처 설명에 따르면, "위험기반무역관리시스템(TAREKS)"은 2010년 말 통상교섭본부가 전자 및 위험기준으로 수출입 물품에 대한 안전 및 품질 점검을 실시하기 위해 출범했습니다. 전자서명을 사용하여 웹에서 도달할 수 있도록 설계된 새로운 제어 시스템은 주로 무역 정책의 효율성을 높이고, 소비자와 기업에 안전하고 품질 좋은 제품을 제공하고, "위험한" 제품과 거래자를 통한 자원 할당을 합리화하고, 세관의 대기 기간을 줄이는 것을 목표로 합니다.
이 시스템은 개인 보호 장비, 장난감, 배터리 및 축전지, 건설 제품, 무선 및 통신 단말 장비, 의료기기, 기계, 승강기, 압력 장비, 전기 및 전자 장비, 일부 산업용 제품, 원자재, 소비자 프로 등 소비자에게 매우 중요한 물품을 포함하며 해당 제품은 안전 검사를 받아야 합니다. 농식품부가 상품성을 검사한 농산물도 포함돼 있습니다.
2020/15의 배터리 및 축전지의 수입 통제에 제 1조에 따, 2021년 2월 28일(이 날짜 포함)까지 이동증명서가 발급된 제품의 수입은 2021년 1월 1일 이전 원산지 또는 통관에 따라 관세청에 제출되는 수출용으로 터키로 반출될 수 있도록 했습니다.
본 Communiqué는Import Controls on Batteries and Accumulators Communiqué 2020/15를 폐지하고, Communique 2021/15 를 2021년 1월 1일부터 시행합니다.
Publication References - Resmî Gazete No. 31351 (4. Mükerrer), 31.12.2020
[태국: 라벨링]
태국은 공산품에 QR코드를 표시하는 시행일을 연기합니다.
2021년 1월 5일, 태국 총리는 공산품에 표준 마크를 표시하고 사용하는 방법에 대한 내각 규정 초안을 발표했습니다.
2020년 6월에 발표된 각료 규정에서 정한 기한에 따라, 공산품에는 2021년 1월 21일부터 TIS 마크와 함께 라이센스 및 공산품 정보를 포함한 표준 마크에 대한 세부 정보가 포함된 "QR 코드"가 포함되어야 합니다.
이 초안은 기업들이 이 새로운 형식의 라벨링의 시행일을 2021년 7월 20일로 연기할 것을 제안하고 있습니다.
[말레이시아: 통신]
말레이시아 MCMC와 SIRIM은 2021년 1월 14일에 LTE를 통한 음성 통화에 대한 최신 요구 조건(VoLTE)을 발표했습니다. 이것은 2020년 11월 13일 3G 네트워크 Sunset에 대한 이전 발표의 업데이트입니다. 이 발표를 통해, 2020년 11월 6일 이후에 제출된 VoLTE를 지원하는 모바일 네트워크를 통해 전화를 걸 수 있는 4G 지원 장치의 모든 새로운 애플리케이션이 다음과 같이 발표되었습니다.
이 업데이트를 위해 MCMC와 SIRIM은 보고서 요구 사항을 확정했습니다.
[베트남: 통신]
베트남 MIC는 2021년 7월 1일부터 시행될 새로운 버전의 기술 표준을 발표했습니다.
다음은 표준 목록입니다.
이 모든 표준은 2021년 7월 1일까지만 인증을 받을 수 있습니다. 기존 표준은 2021년 7월 1일까지 사용할 수 없습니다.
현재 local 시험소는 특정 새 표준에 대해서만 테스트를 수행할 수 있습니다.
[영어 원문]
Russian Federation: energy efficiency
Approval of Requirements for Lighting Devices and Electric Lamps Used in AC Circuits for Lighting purposes, Resolution No. 2255, 2020
In force (since Jan 01, 2021)
On 24 December 2020, the Russian Federation Government issued Resolution No. 2255 to approve energy efficiency requirements for lighting devices and electric lamps used in AC circuits for lighting purposes.
The Resolution provides requirements on energy efficiency of general lamps, and certain types of fluorescent lamps, incandescent lamps, LED lamps, and high pressure lamps, as well as performance requirements for the said products.
According to Article 1, the requirements do not apply to:
In accordance with Article 31, product conformity should be demonstrated by test reports from authorised laboratories or through declaration by the manufacturer.
The Resolution entered into force on 1 January 2021, and ceases to be valid 24 months after the date of entry into force of TR EAEU 048/2019 (i.e. 23 January 2022, following the commencement of EAEU technical regulations on energy efficiency requirements for energy-consuming devices).
Turkey: safety
Import Controls on Batteries and Accumulators, Communiqué 2021/15 Product Safety and Inspection
In force (since Jan 01, 2021)
On 31 December 2020, the Turkish Ministry of Economy issued a Communiqué on the principles and procedures governing the import controls for batteries and accumulators listed in Annex 1.
This Communiqué covers the products specified in Annex-1 to be subject to the Release for Free Circulation Regime and it does not cover the goods that are exported and returned in accordance with the Outward Processing Regime.
All transactions related to import control of batteries and accumulators shall be carried out according to the Risk-Based Control System in Foreign Trade (TAREKS) risk analysis.
Companies intending to import the products within the scope of this Communiqué must obtain the environmental compliance Permit.
The imported goods within the scope of this Communiqué, in any case, must comply with all relevant legislation including the Regulation on the Control of Waste Batteries and Accumulators, etc.
The Communiqué also covers provisions on:
According to explanation of the Turkish Ministry of Trade: “A.TR is a document which is set for free circulation of goods in Turkey and the Community in order to benefit from preferential regime under Customs Union. It indicates that the good is in free circulation; it is not for the proof of its origin.”
Another important definition is Risk-Based Trade Control System (TAREKS). According to the explanation of the Ministry: “Risk-Based Trade Control System (TAREKS)” has been launched at the end of 2010 by the Ministry of Trade to carry out safety and quality checks on export and import goods electronically and on risk basis. Designed to be reached from the web using e-signature, the new control system mainly targets to increase the efficiency of the trade policy, to provide safe and quality products to consumers and firms, rationalize the resource allocation vis-à-vis the control of “risky” products and traders and reduce the waiting periods at the customs.
The System encompasses goods of vital importance to consumers like personal protective equipments, toys, batteries and accumulators, construction products, radio and telecommunications terminal equipments, medical devices, machines, lifts, pressure equipments, electrical and electronic equipments, some industrial inputs, raw materials, consumer products etc. which are subject to product safety inspections. It also includes agricultural products inspected by the Ministry for commercial quality.”
According to Provisional Article 1, upon importer's request, until 28 February 2021 (including this date), importation of the products that movement certificate was issued to be shipped out to Turkey for export purposes in the country of origin before 1 January 2021 or products that were submitted to customs authorities in accordance with customs legislation may be carried out in according to Import Controls on Batteries and Accumulators, Communiqué 2020/15.
This Communiqué repeals Import Controls on Batteries and Accumulators, Communiqué 2020/15, and entered into force on 1 January 2021.
Publication References - Resmî Gazete No. 31351 (4. Mükerrer), 31.12.2020
Thailand: labeling
Thailand to postpone the enforcement date for displaying QR code on industrial products
On 5 January 2021, the Thai Prime Minister announced a draft Ministerial Regulation on the methods of displaying and using standard marks on industrial products.
In accordance with the deadline set by the Ministerial Regulation issued in June 2020, industrial products must bear a "QR code" which contains details on standard marks including license and industrial product information, along with TIS mark starting from 21 January 2021.
The draft primarily proposes to postpone the effective date of this new format of labelling to 20 July 2021, to allow businesses more time to prepare for its implementation.
Malaysia: telecom
Malaysia MCMC & SIRIM had announce the latest Requirement for Voice Over LTE (VoLTE) on 14th January 2021
This is an update from the previous announcement on 3G Network Sunset on 13th November 2020
Through that announcement, it was informed that all new applications for 4G-capable device that can make phone call via mobile network that supports VoLTE that are submitted after 6 November 2020:
For this update, MCMC and SIRIM had finalized the Report requirements for it .
Full Approval shall be granted if applicant demonstrate compliance to VoLTE requirements through test report submitted. Do take note that other certification requirements shall be fulfilled too in order to receive full approval. ( example IPV6 requirements )
Vietnam: telecom
Vietnam MIC had release some new version of technical standards that will be enforced from 1st of July 2021 .
Below are the list of standards
All these standards will only able to be certified by 1st of July 2021.
Old standards will not be able to use by 1st of july 2021
Currently the local lab are only capable to do test for certain new standards only
아르헨티나: 무선
ENACOM은 2020년 11월에 발표된 WiFi 프로토콜을 업데이트했으며 2020년 12월부터 발효되었습니다.
프로토콜의 마지막 페이지에 있는 섹션 6.5만 수정되었으며, v20.2로 업데이트되었습니다. 표시된 30dB의 한계는 Rec ITU-R-SM.1539 에서 정의 및 정의된 바와 같이 " spurious emissions "에만 적용된다는 것을 결정했습니다. 대역 이외의 방출은 제외됩니다.
베트남: 무선
IMT-2000 3GPP - 무선 접속, 고시 43/2020/TT-BTT에 대한 국가 기술 규정 승인
QCVN 117:2020/BTTTT
승인되었습니다 (2021년 7월 1일 발효).
2020년 12월 31일, 베트남 정보통신부는 모바일 사용자 장비의 무선 접속 부분에 적용되는 기술 요건을 명시하기 위한 고시를 발행했습니다.
본 회람은 부록 D에 규정된 범용 무선 접속(E-UTRA) 장비를 제조 및 거래하는 기업 및 개인과 표 1에서 5까지 명시한 모든 또는 하나의 주파수 대역에서 작동하는 제품에 적용됩니다.
해당 장비는 다음을 포함하여 본 문서의 섹션 2에 명시된 기술 규정을 준수해야 합니다.
●환경 조건
● 송신기의 최대/최소 출력 전력
● 인접 채널 선택성(ACS)
● 수신기의 차단 특성
● 수신기 간의 변조 특성
●방사 방출
● 제어 및 모니터링 기능
또한 고시에서 위에 언급한 기술적 특성과 테스트 결과의 해석에 관한 방법을 제시합니다.
마지막으로, 이러한 기술 규정은 고시 02/2018/TT-BTT, E-UTRA(Evolved Universal Terrestrial Radio Access) 사용자 장비(UE) - 무선 액세스를 대체합니다.
해당 고시는 2021년 7월 1일부터 시행될 예정입니다.
인도네시아: 안전
인도네시아 가정용 주방기기 및 난방기구의 국가표준 의무시행, 고시 제58/2020호
승인되었습니다(2021년 12월 23일 발효).
이 법령은 국가 내에서 생산되거나 수입, 유통 및 판매된 가정용 전기의 사용을 위한 난방용 주방 기계 및 가전제품이 모두 SNI 요건을 충족해야 한다고 명시하고 있습니다. 따라서 이러한 제품을 생산한 생산자는 SNI Mark 사용을 위한 제품 인증서를 보유함으로써 입증된 요구 사항을 준수해야 합니다.
SNI 표시에 대한 제품 인증서는 KAN이 인증하고 산업부 장관이 SNI 요건에 대한 제품 품질의 적합성 시험을 통해 임명한 제품 인증 기관이 발급해야 합니다.
Directorate of Electronic and Telematic이사회는 이 법의 시행을 책임지는 기관이며, 제품 인증 및 SNI 표시 절차를 다루는 법령의 기술 지침을 제공해야 합니다.
인도네시아에서 유래하여 수입된 인도네시아 시장에 유통되는 제품은 다음의 요건을 충족해야 합니다.
▶ SNI 7859-2013, 가정용 및 이와 유사한 전기 기기 - 안전 - 제1부: 일반 요구 사항; SNI IEC 60335-2-14-2011, 가정용 및 이와 유사한 전기 기기 - 안전 - 제2-14부: 전기 블렌더, 전기 믹서용, 전기 믹서용에 대한 특정 요구 사항입니다.
■ SNI 7859-2013, 가정용 및 이와 유사한 전기 기기 - 안전 - 제1부: 일반 요구 사항; SNI IEC 60335-2-15-2011, 가정용 및 이와 유사한 전기 기기 - 안전 - 제2-15부: 밥솥 및 전기 주전자에 대한 특정 요구 사항입니다.
■ SNI 7859-2013, 가정용 및 이와 유사한 전기 기기 - 안전 - 제1부: 일반 요구 사항; 그리고 SNI IEC 60335-2-74: 2010, 가정용 및 이와 유사한 전기 기기 - 안전 - 제2-74부: 휴대용 감압 히터에 대한 특정 요구 사항.
■ SNI 7859-2013, 가정용 및 이와 유사한 전기 기기 - 안전 – Part1 : 일반 요구 사항, SNI IEC 60335-2-15-2011, 가정용 및 이와 유사한 전기 기기 - 안전 -제 2-15부: 액체를 가열하는 기기에 대한 특정 요구 사항, SNI IEC 60335-2009, 가정용 및 이와 유사한 전기기기- 안전- 제 2-24부: 특히 냉장 전기제품, 아이스크림 가전제품 및 아이스 메이커, 정수기 에 대한 요구 사항입니다.
용어 및 정의, 품질 요구 사항, 샘플링, 테스트 방법, 테스트 합격, 표시 요구 사항 및 포장재를 명시하는 안전 요구 사항입니다(본 표준은 인도네시아어로 제공됩니다).
이 규정은 2021년 12월 23일부터 시행됩니다.
대한민국: 무선
주파수 분배표, 2008-45 - 수정사항 - (3.7~4.8 GHz 사용 관련) 고시 제 2020-1111 호
시행 중입니다(2021년 1월 1일 이후)
2021년 1월 6일, 미래창조과학부는 기존의 5G 주파수 대역을 활용하기 위해 주파수 분배표 개정안을 발표했습니다.
개정안은 주로 3700-4200MHz 사용에서 UWB 기술을 사용하는 장비를 삭제하고 4.2~4.8GHz 주파수 대역을 UWB 통신에 사용하는 변경 사항을 적용했습니다. 또한, 개정안은 해상 안전, 통신, 위성 및 과학 관련 업무 등에 사용되는 주파수 대역도 변경합니다.
이 통지는 2021년 1월 1일부터 시행되었습니다.
Publication References - Official Government Gazette No, 19913, 06.01.2020
Argentina: wireless
ENACOM updated the WiFi protocol issued in November 2020 and effective since December 2020.
It has been updated to v20.2 because it modifies just the section 6.5 on last page of the protocol. It has been decided to establish that the limit of 30 dB indicated will apply only to “spurious emissions”, as defined and established in Rec. ITU-R SM.1539. Out-of-band emissions are then excluded.
Vietnam: wireless
Approving National Technical Regulation on Land Mobile User Equipment - Radio Access, Circular 43/2020/TT-BTTTT
QCVN 117:2020/BTTTT
Approved (coming into force on Jul 01, 2021)
On 31 December 2020, the Vietnamese Ministry of Information and Communications issued a Circular to specify the technical requirements applicable to the radio access part of the land mobile user equipment.
The Circular applies to organisations and individuals manufacturing and trading Evolved Universal Terrestrial Radio Access (E-UTRA) equipment prescribed in Annex D, and products which operate in all or one of the frequency bands specified from Table 1 to 5.
The said equipment must comply with the technical regulations specified in Section 2 of this document, including:
The Circular also sets out testing methods with regard to the above-mentioned technical characteristics, as well as interpretation of testing results.
Lastly, these technical regulations replace the Circular No. 02/2018/TT-BTTTT, National Technical Regulation on Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) - Radio Access.
The Circular is scheduled to enter into force on 01 July 2021.
Indonesia: safety
Mandatory Implementation of Indonesian National Standards for Household Kitchen Machinery and Appliances for Heating Liquids, Regulation No. 58/2020
Approved (coming into force on Dec 23, 2021)
This decree states that all of Kitchen Machines and Appliances for Heating Liquids for Utilization of Household Electricity produced within the country or imported, distributed and marketed in the country shall fulfil the SNI requirements. The producers which produced these products therefore shall comply with those requirements proven by having Product Certificate for Using SNI Mark.
The product certificate on SNI marking shall be issued by a Product Certification Body which has been accredited by KAN and appointed by the Minister of Industry through testing of the conformity of the products quality against SNI requirements.
Directorate of Electronic and Telematic, Ministry of Industry is the institution that is responsible for the implementation of this decree and shall provide a technical guidance of the decree, which cover procedure of Product Certification and SNI Marking.
Products which are distributed in domestic market that originated domestically and imported shall meet the requirements consisted in:
Safety requirements which specifies term and definition, quality requirements, sampling, testing method, testing acceptance, marking requirement and packaging (this standard is available in Indonesian).
This Regulation enters into force on 23 December 2021.
Korea: wireless
Frequency Allocation Table, Notice No. 2008-45 - Amendment - (on the use of 3.7∼4.8 GHz) Notice No. 2020-111
In force (since Jan 01, 2021)
On 6 January 2021, the South Korean Ministry of Science, Information Technology and Future Planning issued an amendment to the Frequency Allocation Table, to utilise the existing frequency band for 5G.
The amendment primarily deletes equipment using UWB technology from the use of 3700-4200 MHz, and bring changes that 4.2∼4.8 GHz frequency band is used for UWB communication. Furthermore, the amendment also changes frequency bands used for maritime safety, communication, satellite, and science related work, etc.
The notice entered into force on 1 January 2021.
[러시아: 인증]
적합성 선언 등록 절차 승인 및 등록 관리, 고시 478, 2020
2020년 7월 31일, 러시아 경제 개발부는 제품 적합성 선언의 등록에 대한 새로운 절차를 승인하고 통합 등록의 유지에 대한 절차를 수립했습니다.
2021년 1월 1일부터 적합성 신고서를 위한 단일 경로를 이용할 수 있습니다. 신청자는 연방 인증 서비스의 연방 정부 정보 시스템(FGIS Rus Accreditation)을 통해 제품의 적합성 선언서를 전자 형식으로 제출해야 하며, 이 경우 신청자의 인증된 전자 서명이 필요합니다.
기술 규정 준수 선언은 신청자가 제공한 적합성 증빙에 따라 공인 기관에 등록해야 합니다. 등록은 제7조에 기술된 바와 같이 문서의 특정 정보 및 전자 이미지(스캔 복사본)를 제공해야 합니다.
적합성 선언 등록 거부 사유는 다음과 같습니다.
■ 신청자가 적합성 선언 양식에 대해 확립된 요건을 준수하지 않는 경우
■ 제7조 부속 문서 I에서 제공한 문서 및 정보가 완전히 제출되지 않았을 경우
■ 러시아 연방의 기술 규정 및 유라시아 경제 연합의 법률에서 특정 유형의 제품의 기술 규제 및 유라시아 경제 연합의 법률에 대한 법률의 준수가 선언문의 형태로 확인됨을 규정한 요구 사항의 부재
■ 적합성 선언 및 신청인이 강화된 전자서명의 질로 인한 전자문서 형태로 제출한 등록 신청서의 부족
본 고시는 2021년 8월 1일부터 발효되는 적합성 선언 등록 절차의 섹션 7.5 및 12를 제외하고 2021년 1월 1일부터 시행됩니다.
[사우디(KSA): 안전]
SASO는 표준 IEC-62368-1:2018을 SASO IEC 62368-1:2020으로 채택하였습니다.
SASO는 SASO-IEC-60950-1 및 SASO-IEC-60065를 SASO-IEC-62368-1로 전환하려는 계획을 가지고 있습니다. SASO-IEC-62368-1을 적용하는 SASO 유효일은 2021년 1월 7일로 대체되며 SASO-IEC-60950-1 및 SASO-IEC-60065를 대체합니다.
참고: SASO는 IEC-62368-1 및 IEC-60065를 IEC-62368-1과 함께 여전히 적용하였지만, 2021년 1월 7일 부터는 IEC-62368-1만 승인됩니다.
SASO IECEE 인증서는 여전히 만료일까지 유효합니다.
[베트남: 무선]
2.4GHz 대역에서 작동하는 광대역 데이터 전송 장비에 대한 국가 기술 규정(고시 35/2020/TT-BTTTT) QCVN 54:2020/BTTTT
2020년 11월 6일, 베트남 정보통신부는 2.4GHz 대역에서 작동하는 광대역 데이터 전송 장비에 대한 국가 기술 규정을 승인한 고시 35/2020 / TT-BTT를 채택했습니다.
국가 기술 규정은 ETSI EN 300 328 v2.2.2 (2019-07) "광대역 전송 시스템, 2.4 GHz 대역에서 작동하는 데이터 전송 장비; 무선 주파수 접근을 위한 일치 표준"을 기반으로 하며, 2.4GHz 대역에서 작동하는 광대역 데이터 전송 장비에 대한 절차의 필수 무선 요구 사항 및 적합성 테스트를 지정합니다. 부속서 A는 각각 시험에 적용되는 제품에 대한 정보를 제공하는 방사 측정 및 양식에 대한 부속서 B 및 C의 개요 측정 절차를 사용하여 방사 측정을 위한 시험 장소와 배치를 규정하고 있습니다. 발효 시 본 국가 기술 규정은 현행 국가 기술 표준(QCVN 54: 2011/BTTT)을 대체합니다.
이 기술 규정은 2021년 7월 1일부터 시행됩니다.
[터키: 통신]
터키의 통신 당국인 BTK는 현재 형식 승인 절차를 재고하기 위해 모든 형식 승인 신청을 중단했습니다. BTK는 RED 지침을 발표하고 R&TTE의 구현을 종료했습니다.
BTK는 승인을 종료하고 RED 준수/CE 마크, 터키 사용자 매뉴얼, 제품 라벨 및 샘플을 통상부의 소비자 보호법에 따라 작성하도록 요청하기 시작했습니다.
BTK는 수입업자에게 형식승인 신청 절차에 관한 공문을 발행하였습니다. 공문에는 몇 개의 회사가 기재되어 있으며, 차단된 회사가 있습니다. 공문에는 더 이상 승인이 필요 없으며, RED 지시사항에 따라 테스트 보고서와 문서만 있어야 제품을 수입할 수 있다는 내용이 담겨 있습니다.
공문에서, BTK는 또한 시장 감시를 상기시키고 처벌에 관한 관련 규정을 참조합니다. BTK를 상기시키는 것과 관련하여, 모든 회사는 유효한 RED 테스트 보고서와 더불어 터키에서 발행된 규정 및 통신의 관점에서 작성된 터키 사용 설명서와 함께 시장 감시에 대비해야 한다는 점을 알려드립니다.
[대한민국: 안전]
전기제품안전관리법, 고시 제2005-0672호(배터리 시험방법에 관한 사항)에 따른 처리기준, (배터리 시험방법에 관한) 고시 제2020-451호
2020년 12월 11일, 한국 기술표준원은 전기기기 안전관리법에 따른 처리표준 개정안을 발표했습니다.
개정안은 주로 2020년 7월 21일자 개정 표준 KC 62133-2의 변경 사항을 반영합니다. 이에 따라 개정안은 충전식 배터리의 이름을 "리튬 이온, 리튬 폴리머"에서 "리튬이차전지"로 변경하고 10.2의 제품에 대한 특정 테스트 항목을 수정/추가합니다. 추가된 테스트 항목은 배터리에 대한 진동 및 기계적 충격 시험입니다.
이 고시는 2021년 1월 1일부터 시행됩니다.
[칠레: 통신]
칠레의 Subsecretaria de Telecomunicaciones(SUBTEL)는 2020년 10월 22일 고시 1807호를 발표했으며, 이는 현재의 고시 1985를 수정한 것입니다.
이 새 규정의 주요 변경 사항은 아래에 요약되어 있습니다.
• 5.150-5.250GHz 대역의 출력 전력 제한이 최대 EIRP 250mW에서 최대 EIRP 1W(30dBm)로 증가했으며, 최대 PSD는 17mW/MHz이며 실내용으로 제한되었습니다.
• 주파수 대역 5.925~7.125MHz에서 작동하는 AP라고도 하는 액세스 포인트는 실내에서 단독으로 사용해야 하며 다음과 같은 전송 전력 요구 사항을 충족해야 합니다.
- 30dBm의 최대 EIRP입니다.
- 최대 스펙트럼 밀도는 5dBm/MHz입니다.
• 이 대역을 사용하는 AP는 통합 안테나만 있어야 하며 외부 또는 탈착식 안테나를 사용할 수 없습니다.
• 또한 이 대역을 사용하는 AP는 내부 배터리를 사용할 수 없으며 설치할 공간이 없습니다.
• AP 장비와 연결된 사용자 단말 장치는 다음과 같은 전력 수준에서 작동해야 합니다.
- 최대 EIRP는 24dBm 또는 250mW입니다.
- 최대 PSD는 -1dBm/MHz입니다.
요약본입니다
• 이 결의안은 Wi-Fi 6에 따른 새로운 주파수 대역을 기술 표준에 통합하기 위한 것입니다.
• 또한 특히 건물 내부에서 작동하는 주파수 범위와 전력 수준에 대한 명확한 정보를 제공합니다. 여기에는 내부 건물 사용을 위해 더 높은 전력을 가진 5150-5250 MHs 대역의 작동이 포함됩니다.
[태국: 안전]
태국 TISI는 2020년 12월 21일에 TIS166-2549 플러그와 가정용 및 이와 유사한 용도의 콘센트에 대한 "특별 요구 사항"의 공식 규정을 발표했습니다.
발효일 : 2021년 1월 21일입니다.
주의: TISI는 정부 각료들에게 180일을 더 연기할 것을 제안하고 있습니다.
특정 요구 사항의 최초 공지입니다.
TISI/QR 코드 마킹의 요약은 아래와 같습니다.
1) 플러그에 표시하고 포장에 추가로 표시할 수 있습니다.
2) TIS 마크의 위치
플러그의 경우, 핀 영역 또는 측면에 앞쪽에 있어야 합니다.
3) TIS 표시 크기는 플러그 크기에 비례하여 적합해야 하며, TIS 표준번호의 글자 높이가 1.5 mm 이상인 3 mm 이상이어서는 안 됩니다.
4) QR코드 마킹은 다음과 같이 표시하여야 합니다.
플러그의 경우, TIS 마크가 있는 동일한 구역의 포장 또는 부착물에 표시해야 하며 10mm보다 작으면 안 됩니다.
5) 사용권자(수입업체)는 QR 코드 웹사이트에 로그인하여 QR 코드를 만들어야 합니다.
다음은 그 예입니다.
태국 TISI는 2020년 12월 21일 TIS2217-2548 이차 전지 및 알칼리성 또는 기타 비산성 전해질을 포함한 배터리의 "특정 요구 사항"에 대한 공식 규정을 발표했습니다.
발효일 : 2021년 1월 21일입니다.
주의: TISI는 정부 각료들에게 180일을 더 연기할 것을 제안하고 있습니다.
특정 요구 사항의 최초 공지입니다.
TISI/QR 코드 마킹의 요약은 아래와 같습니다.
1) 배터리에 표시하고 포장에 추가로 표시할 수 있습니다.
2) TIS 마크의 위치는 배터리에 있어야 합니다.
- TIS 표시 크기는 건전지 크기에 비례하여 적합하여야 하며, 글자 높이가 1.5 mm 이상인 3 mm 이하이어야 합니다.
- 같은 부위에 10 mm 이상의 TIS 표시를 하여 QR코드 표시를 하여야 합니다.
5) 사용권자(수입업체)는 QR 코드 웹사이트에 로그인하여 QR 코드를 만들어야 합니다.
QR 코드를 배터리에 표시할 수 없는 경우(예: 배터리 크기가 너무 작거나 배터리에서 스캔 가능한 QR 코드 인쇄를 할 수 없는 경우) TIS 마크와 함께 패키지에 표시할 수 있습니다. 단, 이 경우 배터리에는 TIS 표시가 계속 표시되어야 합니다.
다음은 그 예입니다.
[칠레: 안전]
일반 조명용 자체 밸러스트 LED 램프의 안전성 시험 프로토콜(프로토콜 PE 번호 5/17, 고시 33732, 2020) 승인
2020년 12월 7일, 칠레 전기 및 연료 관리국(SEC)은 60와트 이하의 공칭 전력으로 가정용 및 유사한 일반 조명 목적을 위한 자체 밸러스트 LED 램프에 대한 안전 인증 절차와 상호교환성 요건을 확립하는 프로토콜 PE No. 5/17 승인 번호 33.732를 채택했습니다.표준 IEC 62560 2015의 적용 범위 및 분야에 따라 50~250V의 최소 전압과 B15d, B22d, E11, E14, E17, E26, E27, GU10, GZ10 및 GX53 부싱이 사용됩니다.
제품 범위에는 다음이 포함됩니다.
■ 백열등의 필라멘트가 있는 LED 램프, 일반 및/또는 장식용 조명을 위한 투명 또는 훈제 마감(빈티지) 전구
■ 장치와 함께 작동하여 밝기를 변화시키는 램프(디머) 입니다.
■ 튜닝이 가능한 화이트 기능이 있는 램프로, 홈 스위치 애플리케이션을 통해 저온에서 고온까지 색상 온도를 변경할 수 있습니다.
■ 1개 이상의 전원이 있는 램프는 홈 스위치로 작동합니다.
다음 제품은 적용범위에서 제외됩니다.
a) 유기 LED 기술(OLED)을 기반으로 하는 램프
b) 가정용 LED 패널
c) 원형으로 유도된 스포트라이트(내장 또는 겹침), 나사산 베이스 또는 케이블을 통해 네트워크에 직접 연결하는 경우
d) 색깔을 변경할 수 있는 옵션이 있는 LED 램프(RGB 램프)
e) 오디오 기능, 방향제, 카메라, 스마트 기술, 모션 또는 조명 센서, 비상 시스템, Wi-Fi, 지그비 또는 블루투스 연결 등의 특수 기능이 통합된 LED 램프
f) 비상 키트가 내장된 램프는 기존 램프처럼 작동하지만 전원 공급이 중단될 경우 내부 배터리에 저장된 에너지를 사용하여 켜지는 경우
g) 위 사항을 포함하는 모든 유형의 조명기입니다.
이 고시는 인증 절차를 결정하는 프로토콜을 구현합니다. 인증은 III장에 설명된 6개의 인증 시스템 중 하나에 따라 수행됩니다. 사용되는 시스템에 관계없이 인증 기관에는 다음이 필요합니다.
a) 표 A 제5조의 규정에 따른 제품 표시
b) 제품 및/또는 일련 번호 또는 기타 추적가능성의 제조 월/년도를 제품 본문에 표시하고 승인 및/또는 모니터링 인증서에 기록
c) 제품 제조 국가의 표시
d) 교육감이 발행한 R.E. N ° 2142에 따른 인증 마크(SEC Seal)
위 사항을 준수하지 않을 경우 인증 기관에 의해 제품이 거부됩니다.
이 고시는 2021년 12월 31일부터 적용됩니다. 따라서, 국가 제조업체, 수입업체 및 거래자는 이 날짜부터 제품 인증을 받아야 합니다.
[우루과이: 안전]
저전압 전기 제품의 안전, 고시 131/2009 - 수정 - (냉동 장치의 안전 요구 사항에 대한) 고시 153/2020
시행 중입니다(2021년 1월 1일 이후).
2020년 7월 10일 우루과이 에너지 및 수도 규제 기관(URSEA)은 저전압 전기 제품에 대한 안전 규정 개정에 관한 결의안 153/2020을 승인했습니다.
주된 변화는 URSEA 규정 번호 131의 부속 문서 2의 제1조에 있는 전기 냉장 및 유사한 기기의 통합입니다. 라인 "a"에 명시되어 있습니다. 단상 장치의 경우 250V 또는 냉동 식품 저장 장치가 있거나 없는 냉장고를 포함하여 다른 장치의 경우 480V를 초과하지 않는 전기 가전제품이며 보관함, 냉장고-냉동고, 냉동 식품과 냉동고를 보관합니다. 모터 압축기와 냉동 식품 구획에 통합될 예정인 제빙기와 얼음 제조기는 캠프, 캐러밴 및 유람선에서 사용할 수 있는 냉장 장치 및 제빙기와 함께 범위에서 제외됩니다.
해당 고시는 2021년 1월 1일부터 발효될 예정입니다.
[영어 원문]
Russian Federation: certification
Approving Procedures for Registration of Conformity Declaration and Management of Register, Order No. 478, 2020
Approved (coming into force on Jan 01, 2021)
On 31 July 2020, the Russian Ministry of Economic Development approved a new procedure for the registration of product conformity declarations and set the procedure for the maintenance of unified register.
Starting from 1 January 2021, a single route for declaration of conformity registration will be available. Applicants must submit the declaration of conformity of products through the Federal Government Information System of the Federal Accreditation Service (FGIS RusAccreditation) in electronic form, which requires a qualified electronic signature from the applicant.
Technical regulation declarations of conformity must be registered with an authorised agency according to the conformity evidence given by the applicant. Registration entails the supply of certain information and electronic images (scanned copies) of documents, as detailed in Article 7.
Grounds for refusal to register a declaration of conformity include:
This Order will enter into force on 1 January 2021 with the exception of Sections 7.5 and 12 of the procedure for registration of conformity declarations, which enter into force on 1 August 2021.
KSA: safety
SASO adopted the standard IEC-62368-1:2018 as SASO IEC 62368-1: 2020.
SASO has a plan of making a soft transition of SASO-IEC-60950-1 & SASO-IEC-60065 to SASO-IEC-62368-1. The SASO effective date of applying SASO-IEC-62368-1 will be on 01/07/2021 to be superseded and replaces SASO-IEC-60950-1 & SASO-IEC-60065.
Note : SASO still applied IEC-60950-1 & IEC- 60065 as well as IEC-62368-1 to get IECEE certification , but from 01/07/2021 the only standard will be accepted is IEC-62368-1.
and SASO IECEE recognition certificate will be still valid until it's expired date.
Vietnam: wireless
Approving National Technical Regulation on Wideband Data Transmission Equipment Operating in the 2.4 GHz Band, Circular No. 35/2020/TT-BTTTT
QCVN 54:2020/BTTTT
Approved (coming into force on Jul 01, 2021)
On 6 November 2020, the Vietnamese Ministry of Information and Communications adopted Circular No. 35/2020 / TT-BTTTT which approved the national technical regulation on wideband data transmission equipment operating in the 2.4 GHz band
The national technical regulation is based on ETSI EN 300 328 v2.2.2 (2019-07) "Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz band; Harmonized Standard for access to radio spectrum" and specifies essential radio requirements and conformance test procedures for wideband data transmission equipment operating in the 2.4 GHz band.
Annex A stipulates test sites and arrangements for radiated measurements with Annex B & C outlining measurement procedures for radiated measurements and forms providing information about products applicable to testing respectively. Upon entry into force, this national technical regulation will supersede current national technical standards (QCVN 54: 2011/BTTTT)
This technical regulation will enter into force on 1 July 2021.
Turkey: telecom
The telecommunications authority in Turkey, BTK, has halted all type approval applications as they reconsider the current type approval process. BTK has announced the RED directive and terminated the implementation of R&TTE.
BTK had started to terminate approvals and request RED compliance/CE Marking, Turkish User Manuals and the product label and samples to be prepared in regard to the Consumer Protection Law of Ministry of Trade.
BTK issued an official letter regarding the type approval application processes to the importer. The letter is attached and as there are couple of companies stated in the letter We’ve blocked the title of the companies. The letter informed that there are no need for an approval anymore and we can import the products only if they have test reports and Doc in accordance with the RED directive.
In the letter, BTK also reminds about the market surveillance and refer the relevant regulations regarding the penalties. In regard to this reminder of BTK, we would like to inform that; all companies should be ready for the market surveillance with a valid RED test reports and also with Turkish User Manual prepared in terms of the published regulations and communiques in Turkey to save from any penalty.
South Korea: safety
Processing Standards under Electrical Appliances Safety Control Act, Notice No. 2005-0672 - Amendment - (on testing methods for batteries) Notice No. 2020-451
Approved (coming into force on Jan 01, 2021)
On 11 December 2020, the South Korean Agency for Technology and Standards (KATS) issued an amendment to the Processing Standards under Electrical Appliances Safety Control Act.
The amendment primarily reflects changes of amended standard KC 62133-2 dated 21 July 2020. Accordingly, the amendment changes the title of rechargeable batteries from "lithium ion, lithium polymer” to “lithium secondary battery” and amends/adds certain testing items for the products in 10.2. The added testing items are vibration and mechanical shock for batteries.
This Notice will enter into force on 1 January 2021.
Chile: telecom
Subsecretaría de Telecomunicaciones (SUBTEL) in Chile issued Resolution 1807 on October 22, 2020 which is the modification for the current resolution 1985.
The major changes with this new regulation are summarized below:
Summary
Thailand: safety
Thailand TISI had announced the official regulations of “Particular Requirement” of TIS166-2549 Plugs and Socket-Outlets for Household and Similar Purposes on 21st December 2020.
Effective Date : 21st January 2021
NOTES :
TISI is proposing to government cabinet to postpone effective date for additional 180 days.
Original announcement of Particular Requirement
https://appdb.tisi.go.th/tis_devs/p12/file_pr/pr-126.pdf
Summary of the TISI /QR Code Marking as per below.
1) It shall be displayed on plug and may display on packaging in addition.
2) Location of TIS mark.
For plugs, it shall be in front at pin area or at side.
3) TIS mark size shall be suitable and proportion to size of plug, and it shall not be smaller than 3 mm with text height of TIS standard number not less than 1.5 mm.
4) QR code marking shall be displayed as follows.
For plugs, it shall be displayed on packaging or attachment at the same area with TIS mark and shall not be smaller than 10 mm.
5) Licensee (importer) need to login into QR code website to create QR code.
https://appdb.tisi.go.th/tisQRcode/login.php
BELOW Are the EXAMPLE
Thailand: safety
Thailand TISI had announced the official regulations of “Particular Requirement” of TIS2217-2548 Secondary cells and batteries containing alkaline or other non-acid electrolytes on 21st December 2020.
Effective Date : 21st January 2021
NOTES :
TISI is proposing to government cabinet to postpone effective date for additional 180 days.
Original announcement of Particular Requirement
https://appdb.tisi.go.th/tis_devs/p12/file_pr/pr-200.pdf
Summary of the TISI /QR Code Marking as per below.
1) It shall be displayed on battery and may display on packaging in addition.
2) Location of TIS mark shall be on battery.
3) TIS mark size shall be suitable and proportion to size of battery, and it should not be smaller than 3 mm with text height of standard number not less than 1.5 mm.
4) QR code marking shall be displayed in the same area with TIS mark with size not less than 10 mm.
5) Licensee (importer) need to login into QR code website to create QR code.
https://appdb.tisi.go.th/tisQRcode/login.php
In case that QR code cannot be displayed on battery (e.g. battery size is too small or not possible to get scannable QR code printing on battery), it can be displayed on packaging together with TIS mark. However, in this case, TIS mark shall still be displayed on battery.
BELOW Are the EXAMPLE
Chile: safety
Approving Protocol on Safety Testing of Self-ballasted LED Lamps for General Lighting, Protocol PE No. 5/17, Resolution No. 33732, 2020
In force (since Dec 07, 2020)
On 07 December 2020, the Chilean Superintendence of Electricity and Fuels (SEC) adopted Resolution No. 33.732 approving Protocol PE No. 5/17 establishing the procedure for safety certification and interchangeability requirements for self-ballasted LED lamps for home use and similar general lighting purposes, with nominal powers up to 60 Watts, a nominal voltage between 50 and 250 volts and bushes B15d, B22d, E11, E12, E14, E17, E26, E27, GU10, GZ10 and GX53, in accordance with the scope and field of application of Standard IEC 62560 2015.
Products in scope also include:
The following products are excluded from scope:
a) Lamps based on Organic Led technology (OLed).
b) LED panels for domestic use.
c) Circular led spotlight (embedded or superimposed), with direct connection to the network through a threaded base or cables.
d) Led lamps with the option to vary their colour (RGB led lamps).
e) LED lamps that incorporate special features such as: audio functions, air freshener, camera, with smart technology, motion or light sensors, or emergency systems, Wi-Fi, zigbee or bluetooth connectivity.
f) Lamps with a built-in emergency kit, which work like a traditional lamp, but in the event of interruptions in the power supply, they turn on using the energy stored in an internal battery.
g) All types of luminaires that incorporate the above.
This Resolution implements the Protocol which determines the certification procedures. The certification is carried out per one of the six certification systems described in Chapter III. Regardless of the system used, certification bodies will require:
a) Product marking in accordance with the provisions of Clause 5 of Table A;
b) Month/year of manufacture of the product and/or serial number, or other means of traceability, to be marked on the body of the product and recorded in the certificate of approval and/or monitoring;
c) Indication of country of manufacture of the product;
d) Certification Marking (SEC Seal), in accordance with R.E. N ° 2142, issued by the Superintendency.
Non-compliance with the above will result in the product being rejected by the certification body.
The Protocol will apply from 31 December 2021. Accordingly, national manufacturers, importers and traders must obtain product certification from this date.
Uruguay: safety
Safety of Low Voltage Electrical Products, Resolution 131/2009 - Amendment - (on safety requirements for refrigerating appliances) Resolution 153/2020
In force (since Jan 01, 2021)
On 10 July 2020 the Uruguayan Energy and Water Regulator (URSEA) approved Resolution 153/2020 on the amendment of the Safety Regulation for Low Voltage Electrical Products.
The main change is the incorporation of electric refrigeration and similar appliances in Article 1 of Annex II to URSEA Regulation No. 131, specified in line "a", as electric household appliances whose nominal voltage does not exceed 250V for single-phase devices or 480V for other devices, including refrigerators with or without frozen food storage compartment, refrigerator-freezers, appliances for storing frozen food and freezers, whether frost-free or not. Ice makers that incorporate a motor compressor and ice makers intended to be incorporated into frozen food compartments are excluded from scope, along with refrigeration devices and ice makers for use in camps, caravans and pleasure boats.
The Resolution will enter into force on 1st January 2021.
EAEU: 에너지 효율
에너지 소비 장치의 에너지 효율 요구 사항에 대한 전환 규정, 결정 번호 146, 2020.
2020년 11월 25일, 유라시아 경제위원회(EEC)는 결정 114, 2019년에 채택된 에너지 소비 장치의 에너지 효율 요건에 관한 전환 규정(TREAU 048/2019)에 관한 결정 번호 146을 발표했습니다.
기술 규정 TRAEU 048/2019가 발효되기 전에 발표되거나 채택된 필수 에너지 효율 요건이 있는 제품의 적합성 평가에 관한 문서는 유효 기간이 종료될 때까지 유효하지만, 기술 규정 발효일로부터 24개월 이내에 잠정적으로 1일까지 유효합니다. 2023년 9월입니다.
2023년 9월 1일 이후에는 TRUE 048/2019에서 정한 에너지 효율 요구 사항을 준수하는 제품만 유통될 수 있습니다. 또한 기술 규정 발효 이전에 의무적 적합성 평가의 대상이 아니었던 제품의 판매를 위해 24개월의 과도기 기간이 제공됩니다. 기술 규정 발효일로부터, 2021년 9월 1일부터 잠정적으로 TRAEU 048/2019가 발효되기 전에 시행된 요건에 따른 제품에 대한 적합성 평가 문서의 발행 또는 채택은 허용되지 않습니다. 적합성 문서의 유효기간 동안 시행 중인 법률에 따라 제정된 경우 낮은 에너지 효율 제품의 유통은 사용 수명 동안 허용됩니다.
2020년 12월 25일부터 시행됩니다.
중국: 안전
가정용 및 유사 전기 제품의 안전 및 전자기 호환성 인증에 관한 일반 고시, 고시 번호 CQC-12-448100-2009
수정안 - (인증 방법 및 CQC 마크에 관한) 공지, 2020년 11월
2020년 11월 5일, 중국 품질 인증 센터(CQC)는 CQC12-448100-2009를 개정하기 위한 공지사항을 발표하였습니다. CQC-12-448100-2009는 가정용 및 이와 유사한 전기 제품의 안전 및 전자기 호환성 인증에 관한 일반 규칙입니다. 이 수정안은 두 번째 인증 방법을 추가합니다. 제조업체는 인증 후 관리를 거쳐 제품 유형 테스트를 수행하도록 선택할 수 있습니다.
인증은 아래 절차를 따릅니다.
- 인증 신청서
- 제품 type 시험
- 인증결과 평가 및 승인
- 인증 후 감독
본 개정안은 또한 CQC 기본 인증 라벨을 표시해야 하는 인증된 제품으로 라벨 표시 요건을 수정했습니다.
수정안에는 발급된 인증서의 갱신이 포함되지 않습니다.
2020년 12월 5일부터 시행됩니다.
태국: 안전
산업표준 TIS 819의 설립을 위한 Edison Screw Lampholder, 2020년 고시 제5717호
2020년 8월 7일, 태국 산업부는 산업 제품 표준법에 따라Edison Screw Lampholder에 대한 산업 표준 TIS 819의 설립을 발표했습니다.
이 표준은 램프 공급과 세미 조명 기구에만 연결되도록 설계된 Edison screw E14, E27 및 E40이 장착된 램프 홀더에 적용됩니다. 또한 작동 전압이 250V를 초과하지 않는 AC 회로에서만 사용하는 스위치 램프 홀더, 작동 전압이 25V 이하인 실내 연결용 E5형 나사 램프 홀더 및 60V 이하의 실내 및 실외 연결용 E10형 나사 램프 홀더에도 적용됩니다.
표준은 다음을 규제합니다.
- 일반적인 요구 사항입니다.
- 분류
- 테스트
- 구조
- 절연 저항
- 전기 내구성
- 기계적 강도
- 내열성
2020년 12월 5일에 발효됩니다.
출판물 참조 자료 - Thail Government Official Gazette No. 137/182, 07.08.2020
태국: 안전
Luminaire에 관한 산업표준 TIS 902-1의 제정 - Part 1: 일반 요구사항 및 시험, 2020년 고시 제5718호
2020년 8월 7일, 태국 산업부는 Luminire에 관한 산업 표준 TIS 902, Part 1-2563의 설립을 발표했습니다 - Part 1: 산업 제품 표준법에 따른 일반 요구 사항 및 테스트. 이 표준은 최대 1000V의 공급 전압에서 작동하기 위한 전기 광원을 포함하는 조명기의 일반적인 요구사항을 지정합니다. 이 표준의 요구사항 및 관련 시험은 다음과 같습니다.
- 분류
- 마킹
- 기계 구조
- 전기 구조
- 광학 바이오 안전
2020년 12월 5일 발효
Publication References - Thai Government Official Gazette No. 137/182, 07.08.2020
브라질: 통신
ANATEL이 새로운 법률 7280을 출판했습니다. 이 법은 통신용 제품 참조 목록 업데이트를 승인하며, 2020년 4월 20일 법 2222호를 대체합니다.
새로운 법은 180일 후에 시행될 것입니다.
다음은 주요 변경 사항입니다.
- 이전에 1년마다 갱신해야 했던 모든 제품(ONT, WWAN 장치, 휴대폰, 배터리 및 휴대폰용 충전기 등)은 2년마다 갱신됩니다. 1년마다 더 이상 갱신하지 않습니다.
- ANATEL은 적합성 평가 모드가 "적합성 선언"인 제품을 제외하고 모든 인증에 대해 ISO 인증서(영어로 된 경우 선서인 변환 포함)를 요구합니다.
- ANATEL은 OLT, 기업/산업 환경에 설치된 데이터 네트워크 장비(스위치), Digital Multiplex 및 기타 여러 장치에 대해 해외에서 수행한 테스트 보고서를 수락합니다. 외국인 실험실은 ILAC 회원 한 명이 인가해야 합니다. 자세한 내용은 법에서 "note 1", "note 3", "note 7" 또는 "note 8"을 참조하십시오.
- 이전에는 갱신 필요가 없었던 제품도, 이제 OLT, 기업/산업 환경에 설치된 데이터 네트워크 장비(스위치), 멀티플렉서, 동축 케이블, 일부 유형의 광케이블 등 3년마다 갱신해야 합니다.
자세한 내용은 영문판 부록을 참조하십시오.
한국: 에너지 효율
대기전력 프로그램 적용 규정, MKE 고시 No. 2005-45 - 개정 (컴퓨터 및 네트워크 제어 장치의 시험 조건에 관한) 고시 No. 2020-211
2020년 12월 4일, 산업통상자원부는 E-Standby Program Application Regulation의 개정안을 발표했습니다. 새로운 고시는 부록 3의 컴퓨터 대기 전력에 대한 시험 방법을 수정하였습니다. 특히, 개정안은 노트북 및 일체형 PC의 대기 모드에서 전력 소비량을 측정할 때 "모니터 끄기 1분 후 반드시 측정해야 한다"는 테스트 조건을 제거합니다. 개정안은 또한 부록 2에 유선/무선 통신을 이용하여 원격으로 전원을 차단하는 기능과 함께 네트워크형 자동 절전 제어 장치를 추가하여 제품 범위를 확대하였습니다.
2020년 12월 4일부터 시행
태국: 라벨표시 사항
태국 TIS Safety(라벨 표시에 QR 코드를 사용하는 방법)는 다음과 같습니다. 2020년 9월 3일, TISI는 산업 제품 표준법(B.E. Act 2511)에 따라 인증에 대한 추가 마크의 요건을 설명했습니다.
내용은 2021년 1월 21일부터 TIS 마크 시스템이 QR 코드를 사용하여 구현된다는 것입니다. 2021년 1월 21일 이전에 수입 및 입고된 제품은 TISI에 재고를 통지해야 하며, QR 코드는 다음과 같습니다. 1월 21일부터 모든 수입 및 라이센스 제품에 대해 적용되어야 합니다.(예외 없음).
<QR Code 예시>
1개의 QR code : 1 개의 인증서 번호
1. 제품에 표준 마크를 붙이세요.
2. 표준 마크 위치는 제품 중앙과 위쪽의 전면 또는 측면에 있습니다.
3. 제품 크기와 10mm 이상, 문자 높이와 3mm 이상의 크기로 표시해야 합니다.
4. TISI 마크와 동일한 영역에서 제품 정보를 전자 형식(QR 코드)으로 표시하고 크기는 10mm 이상입니다.
* QR Code 설명서
QR 코드 링크 생성은 아래 링크를 통해 진행됩니다.
: https://appdb.tisi.go.th/tisQRcode/login.php
1. 링크를 통해 들어가면 로그인 페이지가 나타납니다. (아직 등록되지 않은 경우, E-라이센스 시스템 www.itisi.go.th을 통해 등록하십시오.) 시스템에 로그인하면 첫 번째 부분이 데이터베이스에서 추출되어 제조업체의 정보를 표시합니다.
2. 제조자가 정보를 기록해야 하는 부분이 있습니다. (제품명, 인증서 번호 등)
3.정보 확인데이터 기록자는 컴퓨터법에 따라 데이터를 저장하기 위해 개인정보를 작성해야 합니다.
4. QR 코드 페이지입니다.
제조사는 그림처럼 URL을 복사하여 직접 QR코드를 생성할 수 있습니다.
제조업체는 아래와 같이 업데이트 메뉴에서 정보를 편집하고 URL 및 QR 코드 링크를 볼 수 있습니다.
이스라엘: 안전
SII: IEC/SI 60950 / IEC/SI 60065는 2020년 12월 20일 이후 만료됩니다.
이스라엘 표준 협회(SII)는 최근에 SI60950 및 SI60065 표준에서 이전에 획득한 SII 승인 인증서를 새로운 SI62368 안전 표준으로 업데이트해야 한다고 확인했습니다. SI60065 인증을 받은 제품의 경우 이러한 제품을 SI62368로 재인증(업그레이드)하는 두 가지 방법이 있습니다.
1. CB 테스트 : 제품과 문서(CB 테스트 인증서, IEC62368-1 및 EMC 테스트 보고서에 대한 전체 CB 테스트 보고서)가 필요합니다.
2. 추가 테스트: 제품을 SII에서 안전 및 EMC에 대해 테스트해야 합니다.
그러나 60950의 경우, 이전 표준과의 차이가 적기 때문에 더 쉬운 방법이 있습니다. 62368 인증 제품과 60950 인증 제품이 모든 측면 (디자인, BoM 등)에서 100 동일하다는 62368 CB 레포트, 인증서 및 성명서가 있다면 이를 수락 할 수 있습니다.
스리랑카: 무선
형식 승인 규정은 12월 16일부터 변경됩니다.
10월 9일 스리랑카 전기통신규제위원회(TRC)는 2020년 12월 16일 관보에 "라디오 및 통신단말장치(RTTE) 형식승인규칙 2020"을 공포하였습니다.
따라서 두 가지 형식 승인 절차가 도입되었습니다.
표준 형식 승인: RTE의 대표 샘플은 TCF(기술 구성 파일)와 함께 제출해야 합니다.
단순화된 형식 승인은 다음 경우에 적용됩니다: RTTE는 신청 당시 이전에 위원회의 승인을 받은 경우. 신청자는 신청된 RTTE가 이미 승인된 RTTE와 동일한지 확인해야 합니다.
특정 RTTE에 대한 형식 승인은 형식 승인 RTTE(시장에 공급됨)가 작동 주파수를 포함하여 동일한 기술 사양을 유지하는 경우 4년 동안 유효합니다.
* 라벨 표시는 필수 사항입니다.
1) 라벨 표시는 스리랑카 시장에 공급되는 Type Approved RTTE에 라벨 및 지정된 형식 승인 번호를 부착하는 프로세스로, RTTE에 대한 소비자의 신뢰도 향상을 위한 본 위원회의 승인된 기술 표준 및 요구 사항을 준수함을 나타냅니다.
2) 위원회로부터 부록 D에 규정된 수수료를 납부한 후 인쇄된 라벨을 확보하여야 합니다. 라벨 비용은 형식 승인 수수료에 추가됩니다. 라벨의 표본은 이 규칙의 부록 G에 나와 있습니다.
3) 모든 형식승인 RTTE는 RTE 포장에 라벨이 영구적으로 부착되어야 합니다.
4) 위원회는 위원회가 등록한 제품의 품질 또는 내구성에 대하여 어떠한 책임도 지지 않습니다.
5) 위원회는 거짓으로 판명된 라벨을 부착한 책임자에 대하여 적절한 규제조치를 취할 권리를 보유합니다.
다음 라디오 장비는 해당 장비가 아래 범주에 속하는 경우 스리랑카에서 제조, 수입, 판매 및 사용에 대한 승인 유형이 면제됩니다.
1. 단거리 적외선 리모컨 장비(TV 리모컨 또는 차고 문 개폐기 포함)
2. 데스크톱 컴퓨터에 내장된 라디오 장비와 Wii 또는 Bluetooth와 같은 단거리 무선 기술을 사용하는 노트북
3. 출력 전력이 50mW 미만인 송신기 장비
4. 내비게이션 장치와 같은 차량이나 WiFi 또는 Bluetooth와 같은 단거리 기술을 사용하는 원격 자동차 키에 설치된 무선 장비
5. Section 27에 따라 개인 용도로 라디오 장비를 국내로 반입한 개인.
새로운 형식 승인 규칙은 형식 승인을 위한 신청자는 즉시 새로운 요건을 따라야 하며, 2020년 12월 16일부터 시행됩니다.
싱가포르: 무선
ESG(Enterprise Singapore)에서 발행하는 CW-CPS-2020-14를 기반으로 합니다. 첨부 파일
ESG는 사물 인터넷(IOT) 기능이 포함된 제어 제품의 등록/갱신을 위해 RS04 양식을 추가로 제출해야 합니다.
IoT 기능이 없는 통제된 상품의 등록/갱신에는 RS04 형식이 필요하지 않습니다.
2020년 12월 21일부터 시작.
첨부된 회람을 참조하십시오.
우루과이: 에너지 효율
에너지 효율 라벨 인증 절차의 새로운 요구 사항입니다.
2020년 12월 1일자로 우루과이 에너지 효율 라벨 부착 허가 절차는 처리를 용이하게 하기 위해 새로운 요건을 갖추게 됩니다.
2020년 7월 24일 Ursea 결의안 169/020호에 따르면 다음과 같습니다.
- 2020년 12월 1일자로 에너지 효율 라벨 인증 절차를 용이하게 하기 위해 제품 시트 또는 적합성 증명서 사본을 더 이상 제출할 필요가 없습니다. 대신, 회사는 해당 제품 인증 기관에서 제공하는 디지털 인증서의 개수, 발급 날짜 및 보안 PIN을 나타내는 Ursea 저장소에 이미 존재하는 디지털 적합성 인증서를 참조해야 합니다.
- 이미 유효한 라벨 인증을 받은 제품에 대해서는 상기 날짜 이전에 발급된 승인에 영향을 미치지 않으므로 추가 절차를 수행할 필요가 없습니다.
- 디지털 인증 취득 방법에 대한 문의는 해당 제품 인증 기관에 문의하는 것이 좋습니다.
- 앞서 언급한 날짜 이후 당사의 웹 사이트 www.gub.uy/ursea에서 에너지 효율 라벨 인증 절차에 대한 업데이트된 설명을 확인할 수 있습니다.
일본: 안전
전기 기기 및 재료에 대한 기술 요건 해석, 2019년 문서 1호 - 개정 - (부속문서 12 적용 표준) 문서 1호, 2020년
2020년 12월 1일, 일본 경제산업성은 전기제품 및 재료의 기술요건 해석에 관한 조례 개정안을 발표했습니다.
개정안은 최신 국제 기술 동향을 반영하기 위해 전기 기기 및 재료에 대한 기술 요건에 따라 적용되는 표준에 다음과 같은 변경 사항을 적용합니다.
- IEC 표준의 최신 버전을 준수하는 7개의 JIS 표준을 최신 버전으로 교체하고 재봉틀, 용접 전원 공급 장치, 전기 잔디 깎기 및 소형 AC 모터와 같은 제품을 다루는 1개의 JIS 표준을 채택합니다.
- 구식인 24개의 표준이 삭제되었습니다.
변경사항은 2020년 12월 1일에 발효되었으며, 이미 사용 중인 JIS 표준을 최신 버전으로 교체하기 위해 3년의 과도기가 적용됩니다.
베트남: 무선
920MHz 주파수 범위, 순환 38/2020/TTTTTT에서 작동하는 저전력 광역 네트워크(LPWAN)의 무선 장비에 대한 기술 규정을 승인합니다.
QCVN 122:2020/BTTTT
2020년 11월 16일, 베트남 정보통신부는 920 MHz ~ 923 MHz 대역의 저전력 광역 네트워크(LPWAN) 무선 장비에 대한 국가 기술 규정 회람을 승인했습니다. 이 국가 기술 규정은 920 MHz – 922.5 MHz 대역에서 작동하는 저전력 광역 통신망 LPWAN(비-IMT IoT라고도 함)의 무선 장비에 대한 무선 주파수, 기술 조건 및 테스트 절차에 대한 기술 요건을 명시합니다.
다음 조항이 포함되어 있습니다.
1. 일반 조항
2. 기술 요구 사항
3. 규정 요구 사항
4. 조직 및 개인의 의무사항
5. 구현 사항
부록 A(표준): 테스트 장비의 기술적 성능
부록 B(표준): 테스트 기구
부록 C(정보): radiated 측정을 위한 현장 및 배치
부록 D(표준): 920-922.5MHz에서 작동하는 저전력 광역 네트워크 LPWAN의 무선 장비 목록은 QCVN을 충족해야 합니다.
2021년 7월 1일부터 시행 예정.
[영어 원문]
On 25 November 2020, the Eurasian Economic Commission (EEC) published a Decision No. 146 on the Transitional Provisions for the Technical Regulations on Energy Efficiency Requirements for Energy-Consuming Devices (TR EAEU 048/2019), adopted by Decision No. 114, 2019.
Documents on conformity assessment of products with mandatory energy efficiency requirements issued or adopted prior to the entry into force of the Technical Regulations TR EAEU 048/2019 are valid until the end of their validity period, but no later than 24 months from the date of entry into force of the Technical Regulations, provisionally until 1 September 2023.
After 1 September 2023, only products complying with the energy efficiency requirements established by TR EAEU 048/2019 will be allowed into circulation.
24-month transitional period is also provided for the sale of products that, prior to the entry into force of the Technical Regulations, were not subject to the mandatory conformity assessment.
Moreover, from the date of entry into force of the Technical Regulations, provisionally from 1 September 2021, it is not allowed the issuance or adoption of conformity assessment documents for products subject to the requirements which were in force prior to the entry into force of the TR EAEU 048/2019.
Circulation of lower energy efficiency products is allowed during their service life if established in accordance with the legislation in force during the period of validity of the conformity documents.
This Decision enters into force on 25 December 2020.
China: safety
General Rules for Safety and Electromagnetic Compatibility Certification of Household and Similar Electrical Appliances, Rule No. CQC12-448100-2009 - Amendment - (on certification methods and CQC mark) Notice, November 2020
In force (since Dec 05, 2020)
On 5 November 2020, China's Quality Certification Centre (CQC) published a Notice to amend CQC12-448100-2009 on general rules for safety and electromagnetic compatibility certification of household and similar electrical appliances.
This amendment adds a second certification method. Manufacturers can choose to have a product type test followed by post-certification supervision. The certification will follow the process below:
This amendment also modified the labelling requirements, with certified products required to be marked with the CQC basic certification label.
Note that this amendment does not involve the renewal of issued certificates. The Notice enters into force on 5 December 2020.
Thailand: safety
On 7 August 2020, the Thai Ministry of Industry announced the establishment of industrial standard TIS 819 on Edison Screw Lampholders under the Industrial Product Standards Act.
The standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in AC circuits only, where the working voltage does not exceed 250 V r.m.s, E5 type screw lamp holders for indoor connection use with working voltage of 25 V and under and E10 type screw lamp holders for indoor and outdoor connection use with working voltage of 60 V and under.
The standard regulates:
This Announcement will enter into force on 5 December 2020.
Thailand: safety
Establishment of Industrial Standard TIS 902-1 on Luminaires - Part 1: General Requirements and Testing, Announcement No. 5718, 2020
In force (since Dec 05, 2020)
On 7 August 2020, the Thai Ministry of Industry announced the establishment of industrial standard TIS 902, Part 1-2563 on Luminaires - Part 1: General Requirements and Testing under the Industrial Product Standards Act.
The Standard specifies general requirements for luminaires incorporating electric light sources for operation from supply voltages up to 1000 V. The requirements and related tests of this standard cover:
This Announcement will enter into force on 5 December 2020.
Brazil: telecom
We are pleasure to inform you that ANATEL published last week the new Act 7280. This act approves the updating of the Reference List of Products for Telecommunications and replaces the Act No. 2222, of April 20th, 2020.
This new Act will become in force after 180 days of its publication (in force after June 1st, 2021).
Below are the main changes:
See annex the English version for your records and complete details.
Korea: energy efficiency
E-Standby Program Application Regulation, MKE Notice No. 2005-45 - Amendment - (on test conditions for computers and networked control devices) Notice No. 2020-211
In force (since Dec 04, 2020)
On 4 December 2020, the Korean Ministry of Trade, Industry and Energy (MOTIE) issued an amendment to the E-Standby Program Application Regulation.
The new notice amends the test method for standby power for computers in Annex 3. Specifically, the amendment removes the test condition requiring that power "must be measured 1 minute after the monitor is turned off" when measuring power consumption in the standby mode of a laptop and all-in-one pc.
The amendment also expands the product scope by adding network-type automatic power saving control devices, with the function of remotely shutting off power using wired/wireless communication to Annex 2.
This Notice entered into force on 4 December 2020.
Thailand: labelling
Thailand TIS Safety (how to use the QR code for labelling): On September 3, 2020, TISI described the requirements for additional marks for certification under the Industrial Product Standards Act (B.E. Act 2511).
The content is that from January 21, 2021, the TIS mark system will be implemented using QR codes. Products imported and in stock prior to January 21, 2021, must notify TISI of stock, and QR codes must
be disclosed on all imported and licensed products from January 21 (no exceptions).
Israel: safety
SII: IEC/SI 60950 / IEC/SI 60065 will be expired after Dec 20th, 2020.
The Standards Institute of Israel (SII) has recently confirmed that SII approval certificates previously obtained to SI60950 and SI60065 standards will have to be updated to the new SI62368 safety standard.
For product which were Certified as SI60065 there are 2 ways to re-certify (upgrade) these products to SI62368:
1. CB testing : requires the product and documentations (CB test Certificate, full CB test report for IEC62368-1 and EMC test report).
2. Supplementary tests: requires the product to be tested for safety and EMC at SII.
But for 60950, the gap is small enough to be able to find better and more convenient solution. It can accept the 62368 CB scheme reports & certificates & statement letter that the product certified for 62368 and the product certified for 60950 are 100 identical from all aspects (design, BoM etc)
Sri Lanka: wireless
Type Approval Regulation will be changed from December 16.
On 09th October the Telecommunications Regulatory Commission (TRC) in Sri Lanka issued “Radio and Telecommunications Terminal Equipment (RTTE) Type Approval Rules 2020” in the official Gazette coming into force on 16th December 2020 - attached
Accordingly, two type approval procedures were introduced:
Standard Type Approval: a represantive sample of RTTE should be submitted accompied by a Technical Construction File (TCF)
Simplified Type Approval is applicable for: RTTE that appears on the Commission’s Type Approval Register which was previously approved by the Commission at the time the original application wasmade. The applicants should ensure that the RTTE applied for is identical to the RTTE which was already approved.
The type Approval for any particular RTTE shall be valid for a period of four (4) years, provided that the type Approved RTTE (supplied to the market) maintains the same technical specifications including the operating frequency.
* Labelling is mandatory.
1) Labelling is the process of affixing a label and a specified Type Approval number on the Type Approved RTTE which is supplied to the Sri Lankan market, indicating its compliance with the Commission’s approved technical standards and requirements for the purpose of improving consumer’s confidence in RTTE.
2) Printed labels shall be obtained from the Commission after payment of the prescribed a fee as stipulated in Appendix D.Thecost of the labels is additional to the Type Approval fee. A specimen of a label is shown in the Appendix G of these Rules.
3) All Type Approved RTTE shall have a label permanently affixed on the packaging of RTTE.
4) The Commission shall not take any responsibility with regard to quality or durability of the product registered by the Commission.
5) The Commission reserves the right to take appropriate regulatory action against the responsible party who has affixed a label found to be faked.
The following radio equipment are exempted from type Approval for manufacture, import, sale and use in Sri Lanka if the equipment belong to below category:
1. short range infrared remote control equipment (including TV remote controls or garage door openers)
2. radio equipment which is embedded in desktop computers and Laptops that use short-range radio technologies such as Wifi or Bluetooth
3. transmitter equipment with an output power below 50 mW
4. radio equipment installed in vehicles such as car navigation units or remote car keys that use short range technologies such as WiFi or Bluetooth
5. individuals who brought radio equipment into the country for their personal use under the Section 27.
The new type approval rules will come into force effect on 16th December 2020, though any applicants for type approval are required to follow the new requirements immediately.
Singapore: wireless
Base on Circular CW-CPS-2020-14 issued by ESG ( Enterprise Singapore ) - attached
ESG will be requiring an additional form RS04 to be submitted for registration/renewal of Controlled Goods incorporating Internet of things (IoT) functions.
Please note that registration/ renewal of Controlled Goods without IoT function will not require form RS04.
This requirement will be starting from 21st Dec 2020.
Please see attached circular
Uruguay: energy efficiency
New requirements for the Energy Efficiency Labeling Authorization Procedure
As of December 1, 2020, the Uruguayan Energy Efficiency Labeling Authorization Procedures will have new requirements with the aim of facilitating their processing.
Based on Ursea Resolution No. 169/020 of July 24, 2020:
As of the aforementioned date, you will find on our website: www.gub.uy/ursea the updated description of the energy efficiency labeling authorization procedure.
Japan: safety
Interpretation of Ordinance on Technical Requirements for Electrical Appliances and Materials, Document No. 1, 2019 - Amendment - (on Annex 12 applicable standards) Document No. 1, 2020
Publish on Dec 01, 2020
On 1 December 2020, the Japanese Ministry of Economy, Trade and Industry (METI) issued an amendment to the Interpretation of the Ordinance on Technical Requirements for Electrical Appliances and Materials.
The amendment brings the following changes to the standards applicable under technical requirements for electrical appliances and materials to reflect the latest international technology trends:
The changes became effective on 1 December 2020, and a transitional period of 3 years will apply for replacing JIS standards already in use with a newer version.
Vietnam: wireless
Approving Technical Regulation on Radio Equipment in the Low Power Wide Area Networks (LPWAN) Operating in the 920 MHz Frequency Range, Circular 38/2020/TT-BTTTT
QCVN 122:2020/BTTTT
Approved (coming into force on Jul 01, 2021)
On 16 November 2020, the Vietnamese Ministry of Information and Communications approved a circular on National technical regulation on low-power wide-area network (LPWAN) radio equipment in the 920 MHz to 923 MHz bands.
This national technical regulation specifies technical requirements on radio frequency, technical conditions, and test procedures for radio equipment in the Low power wide area networks LPWAN (also known as non-IMT IoT) operating in the 920 MHz – 922.5 MHz bands.
The following provisions are included:
1. General provisions
2. Technical requirements
3. Regulatory requirements
4. Obligation of organizations and individuals
5. Implementation
Annex A (normative): Technical performance of the test equipment
Annex B (normative): Test fixture
Annex C (informative): Test sites and arrangements for radiated measurement
Annex D (normative): List of radio equipment in low power wide area network LPWAN operating at 920-922.5 MHz must meet the QCVN.
This regulation will enter into force on 1 July 2021.
Site Selector
Global
Americas
Asia
Europe
Middle East and Africa