Telecommunications Testing

Telecommunication products used in Telecom networks must undergo regulatory tests and certifications in India and many other countries. TÜV SÜD's expert guidance navigates through mandatory regulations such as EU, North/South America, and India requirements, and streamlines wireless communication complexities, transforming potential barriers into international pathways for success. From EMI/EMC, Electrical Safety, Reliability and RF compliance, TÜV SÜD has it covered to ensure the credibility of your telecommunication products.

TESTING INFRASTRUCTURE

Complete EMI/EMC testing with a 10m Semi-Anechoic chamber as per product standard ETSI EN 300 386, IEC/EN 55032, IEC/EN 55035, FCC standards
Sophisticated Wireless testing facilities to support regulatory requirements of BlueTooth, WiFi, SRD and Cellular technologies. Major standards supported include ETSI/EN 300 328, ETSI/EN 301 893, ETSI/EN 302 502, ETSI/EN 300 220, ETSI/EN 300 330, ETSI/EN 300 440, FCC Part 15, Part 22, Part 24, RSS standards
Electrical safety test facilities covering major national and international standards
Comprehensive Environmental simulation test facilities for Temperature, humidity, altitude, thermal shock, shock and vibration, combined vibration, water and dust facilities
Global Market access services for all Telecom products

EMI/EMC CAPABILITIES

Tests and Capabilities
- Radiated Emission
  Up to 40Ghz frequency range within 10m Semi-Anechoic chamber
- Conducted Emission
  10Khz - 108Mhz. Three Phase up to 200A
- Current Harmonics
  up to 32A
- Voltage Flicker & Fluctuations
  up to 32A
- Electrostatic Discharge
  ± 30KV. Both Commercial & Automotive
- Radiated Susceptibility
  20Mhz – 6.0Ghz up to 100V/m
- Electrical Fast Transient
  Three Phase up to ± 5.0KV
- Surge Immunity
  Three Phase up to ± 7.0KV
- Ring Wave Immunity
  Three Phase up to ± 7.0KV
- Conducted Susceptibility
  From 10Khz – 230Mhz up to 30Vrms
- Bulk current injection
  From 10Khz – 400Mhz up to 400mA
- Power Frequency Magnetic Fields
  up to 300A/m (Continuous); 1000A/m (Short Time)
- Pulse Magnetic Field
  up to 1000A/m
- AC & DC Dips and Interruptions
  Three Phase up to 32A
- Automotive Transients
  Transient Emission, Pulses (1, 2a, 2b,3a, 3b & 4), DC 80V/50A

ACCREDITATION FOR THE LAB

National Accreditation Board for Testing and Calibration Laboratories (NABL)
American Association for Laboratory Accreditation
Bureau on Indian Standards (BIS)
Telecommunication Engineering Centre (TEC)
IECEE CB Testing Laboratory (CBTL)
German Safety (GS)
Nationally Recognized Testing Laboratory (NRTL)

STANDARDS WE TEST AGAINST

India
Regulation:
- Mandatory Testing and Certification of Telecom Equipment (MTCTE)
- Wireless Planning and Co-ordination Wing (WPC)
Requirement:
1. EMI/EMC

2. Electrical Safety

3. Radio Frequency

4. Environmental

5. Security
European Union
Regulation:
- CE Marking
Requirement:

1. EMC Directive

2. Low Voltage Directive

3. Radio Equipment Directive

4. RoHS Directive

5. WEEE Directive
North America
Regulation:
- Federal Communication Commission Regulations
- Occupational Safety and Health Administration
Requirement:

Code of Federal Regulations

1. FCC Part 15

2. FCC Part 22

3. FCC Part 24

4. FCC Part 68

5. UL 62368-1

PRODUCTS WE TEST

Major Products
- Data Modem
- IoT Gateway
- Smart Electricity Meter
- Lan Switch
- Router
- EPABX
- Mobile Handsets
- Base Station controller
- Media Gateway
- Signaling Gateway
- Media Server
- Transmission Terminal Equipment
- Radio Broadcast Receivers
- Satellite Communication equipment

WHY CHOOSE TÜV SÜD FOR TELECOMMUNICATIONS TESTING?

Global Network of Experts
Benefit from our global expertise, local experience and reach through our network of labs for telecom products
Comprehensive Suite of Services
TÜV SÜD’s test laboratories can be used for compliance testing, verification, validation, engineering and re-engineering activities of telecom products
State-of-the-art Facilities
Our 10m Semi-Anechoic chamber is designed and constructed to accommodate the testing of complex telecom products
Timely Market Updates
Our market access teams keep a constant watch on the change in global regulations, standards, and requirements time to time and updates the telecom product fraternity on the possible impact on their products and product families
Flexible Certification Schemes
Telecom manufacturers can include a wide range of telecom products under a single report and certificate, which streamlines regulatory processes for a seamless market entry

Telecommunications