India | EN

Electro-magnetic interference / electro-magnetic compatibility (EMI/EMC)

How its tested matters - your trusted partner

EMC Lab in the Bangalore/Bengaluru location in India.

How its tested matters - your trusted partner

In today's interconnected landscape, Electro Magnetic Interference (EMI) and Electro Magnetic Compliance (EMC) are paramount for Electrical/Electronic/Electro-Mechanical (E/E/E) systems to meet government regulations and OEM standards.

EMI is classified into two categories: Inter-System and Intra-System Interference. Both demand precise design and manufacturing to withstand the emissions in the Electro Magnetic Environment.

TÜV SÜD's expertise and new state-of-the-art test facility for Electro Magnetic Interference and Electro Magnetic Compatibility (EMI/EMC) testing will ensure your products align with global standards, surpassing compliance expectations.

What our testing infrastructure includes

10m Semi-Anechoic chamber

Radiated Emission:

  • Frequency Range supported from 10KHz – 40GHz
  • Measurement Range from 1m, 3m, 5m & 10m antenna distance
  • Turn Table size of 6.0m Diameter
  • Turn Table loading capacity of 6000 Kg
  • 10 Semi-Anechoic chamber is validated for latest CISPR & ANSI standards by Shielding Integrity Services, USA
  • Supports testing of large equipment’s (CT Scanners, MRI Equipment, Automotive Vehicles etc.)
  • Power supply capacity upto 3Φ 690VAC / 200A & 1000VDC / 500A
  • Amplifier / accessory room is housed just below the turn table for easy routing of Power & Signal cables without disconnection or damage
  • Equipped with 2 No. of Bore-Sighted Antenna masts
  • Measurement supported with Single Antenna or Dual Antenna measurement
  • Large display within 10m Semi-Anechoic chamber to help de-bugging activities
  • Supports testing of all product categories including Automotive Vehicle and Automotive Sub-assemblies
  • Supports testing of Radiated Spurious measurements for Wireless products

Radiated Susceptibility:

  • Frequency Range supported from 20MHz – 6GHz
  • Measurement Range from 1m & 3m antenna distance
  • Field Strength supported up to 100V/m
  • Supports testing of all product categories including Automotive Vehicle and Automotive Sub-assemblies
  • Amplifier / accessory room is housed just below the turn table for easy routing of Power & Signal cables without disconnection or damage
Shielded Room
  • Large Shielded room supports measurement of Conducted Emission both for Commercial and Automotive Sub-assemblies
  • Shielding attenuation up to 18Ghz
  • Shielded room also supports for debugging activities
Continuous Conducted Emission
  • Supports measurement from frequency range 10KHz – 30MHz for Commercial products both in Voltage and Current methods
  • Power supply capacity upto 3Φ 690VAC / 200A & 1000VDC / 500A
  • Supports measurement from frequency range 150KHz – 108MHz for Automotive Sub-assemblies in Voltage method
  • Supports measurement from frequency range 150KHz – 245MHz for Automotive Sub-assemblies in Current method
  • Equipped with all necessary ISN’s for measurement of Conducted emissions on Signal & Telecommunication ports
Van-Veen Loop
  • Supports Radiated disturbance measurement as per the standard CISPR 15 & EN 55015 
  • Equipped with 2m Van-Veen loop antenna for testing Radiated disturbance testing of Lamps and Luminaires 
  • Supports measurement for the frequency range 9KHz – 30MHz
Disturbance Power
  • Supports Radiated disturbance power measurement as per the standard CISPR 14-1 & EN 55014-1
  • Equipped with Disturbance power test facility to test Household equipment’s and appliances
  • Supports measurement for the frequency range 30MHz – 300MHz
  • Test can be performed in Semi-Anechoic chamber / Shielded room in the event of high ambient
Clicks Measurement
  • Supports Clicks measurement as per the standard CISPR 14-1 & EN 55014-1
  • Equipped in test receiver and software for measurement of dis-continuous conducted emission (Clicks) for Household equipment’s and appliances
  • Test software supports 4 channel clicks measurement simultaneously and reduces the overall test duration
Current Harmonics
  • Supports Current Harmonic emissions as per the standard EN/IEC 61000-3-2 & EN 61000-3-11
  • Supports testing of Electrical & Electronic products up to 32A
Voltage Flicker and Fluctuation
  • Supports Voltage flicker & Fluctuations test as per the standard EN/IEC 61000-3-3 & EN/IEC 61000-3-12
  • Supports testing of Electrical & Electronic products up to 32A
Electrostatic Discharge
  • Supports testing as per the International standards IEC/EN 61000-4-2, ISO 10605 and other product standards
  • Testing range will be from ±250V to ±30KV
  • Equipped with all RC networks inline to the mentioned standards
  • Laboratory equipped with De-humidifiers for maintaining the Humidity below 60% RH
Combination Wave Generator

Electrical Fast Transients (EFT)

  • Supports testing as per the International standards IEC/EN 61000-4-4 and other product standards
  • Equipped with state-of-the-art test equipment to test up to ±5.5KV
  • Equipped with necessary CDN’s and capacitive clamps
  • Supports testing of power ports, signal and Interconnecting cables
  • CDN capability of power ports upto 3Φ 690VAC / 63A

Surge Immunity

  • Supports testing as per the International standards IEC/EN 61000-4-5 and other product standards
  • Equipped with state-of-the-art test equipment to test upto ±7.0KV
  • Equipped with necessary CDN’s for testing of power ports, signal and Telecom ports
  • Supports testing of power ports, signal and Interconnecting cables
  • CDN capability of power ports upto 3Φ 690VAC / 63A

Ring Wave Immunity

  • Supports testing as per the International standards IEC/EN 61000-4-12 and other product standards
  • Equipped with state-of-the-art test equipment to test upto ±7.0KV
  • Equipped with necessary CDN’s for testing of power ports and signal ports
  • Supports testing of power ports, signal and Interconnecting cables
  • CDN capability of power ports upto 3Φ 690VAC / 63A
Conducted RF
  • Supports testing as per the International standards IEC/EN 61000-4-6, ISO 11452-4 and other product standards
  • Equipped with state-of-the-art test equipment to test up to 30Vrms
  • Equipped with test facilities to support Bulk current injection up to 400mA
  • Equipped with necessary CDN’s for power, signal & interconnecting cables
  • Supports testing of power ports, signal and Interconnecting cables
  • CDN capability of power ports up to 3Φ 690VAC / 63A
Power Frequency Magnetic Field
  • Supports testing as per the International standards IEC/EN 61000-4-8 and other product standards
  • Maximum field strength of 300A/m in continuous mode and 1000A/m in intermittent mode
  • Support testing for small and large products with 1m X 1m induction coil and 2.6M X 1m induction coil
Pulse Magnetic Field
  • Supports testing as per the International standards IEC/EN 61000-4-9 and other product standards
  • Maximum field strength of 1000A/m
  • Support testing for small and large products with 1m X 1m induction coil and 2.6M X 1m induction coil
Voltage Dips and Interruptions
  • Supports testing as per the International standards IEC/EN 61000-4-11, IEC/EN 61000-4-29, IEC/EN 61000-4-34 and other product standards
  • CDN capability of AC power ports up to 3Φ 690VAC / 32A
  • CDN capability of DC power ports up to 80VDC / 50A
  • Voltage Dips, interruption and power fail simulation can be performed for 0% to 100%
Automotive Transient Generator
  • Automotive Transient Immunity System Capability of 80V DC and 50A
  • Supports pulse1, pulse 2a, pulse 2b, pulse 3a, pulse 3b and pulse 4 as per ISO 7637-2 standard both at 12V and 24V Systems
  • Supports pulses on other than supply lines in CCC Method Fast A, Fast B Pulses. DCC Method Fast & Slow Pulse (Positive and Negative) and ICC Method Slow Pulse as per ISO 7637-3 standard both at 12V and 24V Systems
  • Automotive Transient Emission measurement system supports the measurement of transient disturbance from 12V and 24V from ESA as per ISO 7637-2 standard
  • Automotive Transient Immunity and voltage dropout on supply lines as per ISO 16750-2 standard of output voltage 10V, Frequency of DC -50kH. Supports multiple Segment types like DC voltage, Sine wave, Sine wave sweep, square wave, Triangular wave, Sawtooth wave, Ramp up / Ramp down, Exponential wave
Wireless Test System
  • Wireless Test System Capability of Testing of Conducted Parameters of Wi-Fi, Bluetooth, BLE of 2.4GHz and 5GHz as per ETSI EN 300 328 and ETSI EN 301 893, FCC Part 15.247 Subpart C, FCC Part 15.407 Subpart E respectively
  • Supports SRD Devices like ZigBee, LoRa, NFC etc., as per ETSI EN 300 220, ETSI EN 300 330.  ETSI EN 300 440, ETSI EN 302 208, FCC Part 15.247 Subpart C respectively
  • Supports Cellular Bands of WCDMA, 4G/LTE as per ETSI EN 301 908-1/13, FCC Part 22, FCC Part 24, FCC Part 27 respectively

Standards we test against

EMI/EMC standards
  • Medical equipment’s
    IEC/EN 60601-1-2, IS 13450-1-2
  • Industrial equipment’s
    IEC/EN 61000-6-4 & IEC/EN 61000-6-2
  • Residential, commercial and light-industrial environments
    IEC/EN 61000-6-1 & IEC/EN 61000-6-3
  • Un-interruptible power supply (UPS)
    IEC/EN 62040-2
  • General lighting products
    CISPR 15 & IEC/EN 61547
  • Multimedia equipment’s
    CISPR 32, CISPR 35, EN 55032 & EN 55035
  • Radio equipment and services
    ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI EN 301 489-34, ETSI EN 301 489-17, ETSI EN 301 489-19, ETSI EN 301 489-24, ETSI EN 301 489-54
  • Automatic electrical controls
    IEC/EN 60730-1
  • Household and similar electrical appliances
    CISPR14-1 & CISPR 14-2, IEC/EN 55014-1 & IEC/EN 55014-2, IEC/EN 60335-1
  • Low-voltage switchgear and control gear
    IEC/EN 61439-1 & IEC/EN 60947
  • Switches for household and similar fixed electrical installations
    IEC/EN 60669-2-1
  • Industrial-process measurement and control – programmable logic controls (PLC)
    IEC/EN 61131-2
  • Measurement, control, and laboratory use
    IEC/EN 61326-1, IEC/EN 61326-2-1, IEC/EN 61326-2-2, IEC/EN 61326-2-3, IEC/EN 61326-2-4, IEC/EN 61326-2-5, IEC/EN 61326-2-6
  • Measuring relays and protection
    IEC/EN 60255-1
  • Automatic electrical controls
    IEC/EN 60730-2-9
  • Maritime navigation and radiocommunication
    IEC/EN 60945
  • Rotating electrical machines
    IEC/EN 60034-1
  • Adjustable speed electrical power drive systems
    IEC/EN 61800-3
  • Railway applications
    IEC/EN 62236-3-1 & 3-2, IEC/EN 50121-3-2, IEC/EN 60571, IEC/EN 50121-1, IEC/EN 50121-2, 4, 5, IEC/EN 50155
  • Industrial network products
    IEC/EN 61784-1-0
  • Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use
    IEC/EN 55103-1, IEC/EN 55103-2
  • Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
    IEC/EN 50270
  • Electrical installations in ships
    IEC/EN 60092-504
  • Electric vehicle conductive charging system
    IEC/EN 61851-21-2
  • Measuring relays and protection equipment
    IEC/EN 60255-26
  • Simulation of electrostatic effects - human body model (HBM) electrostatic discharge test waveforms
    IEC/EN 61340-3-1
  • Automotive vehicles & automotive sub-assemblies
    CISPR 25, CISPR 12, IEC/EN 55025, ECE R10, AIS 003 Issue 4
  • Wireless products
    ETSI EN 300 328, ETSI EN 301 893, ETSI EN 300 220, ETSI EN 300 330,  ETSI EN 300 440, ETSI EN 302 208, ETSI EN 301 908-1, ETSI EN 301 908-13, FCC Part 15, FCC Part 22, FCC Part 24, FCC Part 27, RSS Standards

Accreditations for the lab:

  • National Accreditation Board for Testing and Calibration Laboratories (NABL)
  • American Association for Laboratory Accreditation
  • IECEE CB Testing Laboratory (CBTL)

Why choose TÜV SÜD?

  • A one-stop destination
    TÜV SÜD can facilitate multi-country approvals for all products by testing within their state-of-the-art test facilities
  • Comprehensive suite of services
    Aside from compliance testing, TÜV SÜD’s EMI/EMC laboratories can also be used for verification, validation, engineering, and re-engineering activities of your products
  • State-of-the-art facilities
    TÜV SÜD’s 10m Semi-Anechoic chamber is designed and constructed with a turn table size of 6.0m and a payload provision of 6000Kg which helps to accommodate more extensive products. In the immediate future, our infrastructure is built to accommodate additional 3m Semi-Anechoic chambers
  • Global market access
    Our technical teams have expertise in National and International standards and can navigate through the regulatory requirements that a product needs to comply with local and global needs
  • Operational round-the-clock
    Our test facilities run 24/7, and we help businesses reduce the product life cycle of testing and validation