TÜV SÜD is committed to supporting the automotive industry with specialized services for enhanced technical safety and environmental compliance. Our rigorous testing covers Automotive Components and Vehicles, aligning seamlessly with national regulations and Original Equipment Manufacturers (OEM) specifications. Our in-house facilities are equipped for Verification and Validation, Assessment, Homologation and Global Market access of Electronic Sub-Assemblies (ESA). Further, our local expertise also caters to the fast-evolving requirements of the domestic market. With a dedicated team and a proven track record, we streamline global compliance strategies and ensure precise technical alignment for businesses in the automotive industry.
Testing infrastructure
- Complete EMI/EMC testing with a 10m Semi-Anechoic chamber supporting Automotive standard EN/IEC 55012, EN/IEC 55025, ECE R10, AIS 003, and OEM specific standards
- Sophisticated Wireless testing facilities to support regulatory requirements of BlueTooth, WiFi, SRD and Cellular technologies. Major standards supported include ETSI/EN 300 328, ETSI/EN 301 893, ETSI/EN 302 502, ETSI/EN 300 220, ETSI/EN 300 330, ETSI/EN 300 440, FCC Part 15, Part 22, Part 24, RSS standards
- Comprehensive Environmental and mechanical simulation test facilities for Temperature, humidity, altitude, thermal shock, shock and vibration, combined vibration, water and dust facilities
- Global Market access services for all Electronic Sub-assemblies and Vehicles
Our services
Tests conducted
- Managing market surveillance according to Regulation (EU) 2018/858
- Cybersecurity Assessment for Automotive Components
- Assessment of Automated Vehicles with Scenario-based Testing
- Battery Testing
- Emissions and Fuel Efficiency Testing
- Virtual Safety Testing
- Dynamic Component Testing
- Buzz, Squeak and Rattle Testing
- Electronics Testing
- Fuel Tank and Component Testing
- Cooling Systems & Component Testing
- Interior & Exterior Component Testing
- Tyre Testing
- Wheel Testing
Test and capabilities
- Radiated emission
Up to 40Ghz frequency range within 10m Semi-Anechoic chamber - Conducted emission
10Khz - 108Mhz. Three Phase up to 200A - Current harmonics
up to 32A - Voltage flicker & fluctuations
up to 32A - Electrostatic discharge
± 30KV. Both Commercial & Automotive - Radiated susceptibility
20Mhz – 6.0Ghz up to 100V/m - Electrical fast transient
Three Phase up to ± 5.0KV - Surge immunity
Three Phase up to ± 7.0KV - Ring wave immunity
Three Phase up to ± 7.0KV - Conducted susceptibility
From 10Khz – 230Mhz up to 30Vrms - Bulk current injection
From 10Khz – 400Mhz up to 400mA - Power frequency magnetic fields
up to 300A/m (Continuous); 1000A/m (Short Time) - Pulse magnetic field
up to 1000A/m - AC & DC dips and interruptions
Three Phase up to 32A - Automotive transients
Transient Emission, Pulses (1, 2a, 2b,3a, 3b & 4), DC 80V/50A
Accreditation for the lab
- National Accreditation Board for Testing and Calibration Laboratories (NABL)
- American Association for Laboratory Accreditation
Why choose TÜV SÜD for automotive components testing?
- Comprehensive suite of services
TÜV SÜD’s test laboratories are able to conduct compliance testing, verification, validation, engineering and re-engineering activities of Automotive Components and Automotive Vehicles - State-of-the-art facilities
TÜV SÜD’s 10m Semi-Anechoic chamber is designed and constructed to accommodate testing of Automotive Vehicles in the category of 2 Wheeler, 3 Wheelers, and 4 Wheelers, which can fit within 6m Turn Table with a maximum mass of 6000 Kilograms - Global market access
Our technical teams have expertise in National and International standards and can navigate through the regulatory requirements which Automotive products need to comply for local and global needs - Comprehensive assessment for automotive components manufacturers
Our Mechanical and Environmental facilities help businesses simulate High Accelerated Life Tests (HALT), where prototypes are stressed to a much higher degree than expected from actual use, to enhance product reliability - Timely market updates
Our market access teams keep a constant watch on the change in global regulations, standards, and requirements and updates the Automotive product fraternity on the possible impact on their products and product families