Environmental Testing

ENVIRONMENTAL TESTING

How its tested matters - Your trusted partner

How its tested matters - Your trusted partner

At TÜV SÜD, our state-of-the-art labs and experts provide environmental testing solutions that stimulate different climatic conditions and mechanical stress that your products are exposed to. With our global expertise, the test evaluations of your products & components can be covered against shock, vibrations, bump, drop and water ingress protection/rain. Our environmental testing lab is further equipped to simulate varying levels of environmental conditions, including temperature, impact, humidity, and air pressure. From verification & validation to assessment & gap analysis, TÜV SÜD has it covered to ensure the credibility and compliance of your products, components & technical equipment.

 

ACCREDITATION FOR THE LAB

  • National Accreditation Board for Testing and Calibration Laboratories (NABL)
  • Telecommunication Engineering Center (TEC)
  • International Accreditation Service (IAS)
  • Bureau of Indian Standards (BIS)
  • Directorate General of Aeronautical Quality Assurance (DGAQA)
In process*

Testing Infrastructure

  • Shock & Vibration
    • Sine, Random, Classical Shock, SOR, ROR in all 3 axis
    • Slip Table Dimension: 1200 X 1200mm
    • 5000 Kgf Force Rating Vibration Shaker
    • Frequency Range: (DC) 1Hz to 3000Hz
    • Displacement: 63.5mm Max.
    • Acceleration- bare table: 100g
    •  Shock test: 150g, 6ms 
  • Thermal with Humidity
    • Chamber Name: Climatic Chamber (Small)
    • Test Space Dimension: 500 X 600 X 750mm (W X D X H)
    • Temperature Range: -70 to +180 °C
    • Ramp Rate: 3°C / Minute
    • Humidity Range: 10% - 98% RH
    •  Special Feature: +10°C with 10% RH
  • Thermal - Humidity - Altitude
    • Chamber Name: Altitude / CATH
    • Test Space Dimension: 1000 X 1000 X 1000mm (W X D X H)
    • Temperature Range: -70 to +180 °C
    • Ramp Rate: 5°C / Minute
    • Humidity Range: 10% - 98% RH
    • Special Feature: +10°C with 10% RH
    • Altitude /Pressure: Up to 1mbar
    • Over pressure Range: Up to 1200mbar
  • Thermal Shock
    • Chamber Name: Thermal Shock
    • Basket Dimension: 600 X 600 X 600 mm (W X D X H)               
    • Cold Zone: +25 to -70 °C
    • Hot Zone: +25 to +180 °C
    •  Transfer Time: Within 1 Minute
  • Mechanical - Thermal & Vibration (Combined)
    • Test Space Dimension: 1500 X 1500 X 1200mm (W X D X H)
    • Temperature Range: -70 to +180 °C
    • Ramp Rate: 10°C / Minute
    • Humidity Range: 10% - 98% RH
    • Special Feature: +10°C with 10% RH
  • Ingress Protection
    • Solids: IP1X to IP4X, Dust: IP5X & IP6X 
    • Water Ingress: IPX1 to IPX9

 

STANDARDS WE TEST AGAINST

  • Environmental Testing
    • Testing types: Cold, Dry Heat, Damp Heat Cyclic / Steady State, Humidity Test, Cyclic Salt Corrosion, Altitude, Combined Temperature Humidity Altitude (CATH) Test, Combined Temperature with Vibration (Integrated Chamber)
    • Testing standards:
    • IEC 60068-2
    • JSS 55555
    • IS 9000
    • EN 60068-2
    • MIL-810
    • SAE J1455
    • MIL-883
    • MIL-2164A
    • MIL-310
    • MIL-331D
    • QM-333
    • DO-160G
    • ISO 16750
    • ETSI 300019
  • Vibration Testing
    • Testing types: Sine, Random, Shock & Bump Test
    • Testing standards:
    • IEC 60068-2
    • IS 15591
    • EN 60068-2-6
    • JSS 55555
    • EN 60068-2
    • MIL-810
    • SAE J1455
    • MIL-883
    • MIL-2164A
    • MIL-310
    • MIL-331D
    • QM-333
    • DO-160G
    • ISO 16750
    • ETSI 300019
  • Ingress Protection of Dust and Water
    • Testing types: Ingress Protection of Dust and Water
    • Testing standards:
    • IS / IEC / EN 60529
    • JSS 55555
    • QM 333
    • IEC 60068-2
    • ETSI 300019
    • ISO 20653
    • EN 50155
    • MIL-STD-202H
    • MIL 810

 

WHY CHOOSE TÜV SÜD FOR ENVIRONMENTAL TESTING?

  • A One-stop Destination

TÜV SÜD can facilitate multi-country approvals for all products by testing within their state-of-the-art test facilities.

  • Global Market Access

Our technical teams have expertise in National and International standards and can navigate through the regulatory requirements that a product needs to comply with local and global needs. TÜV SÜD being presence more than 1000 locations globally, test reports issued by TÜV SÜD have a better market penetration and customer acceptance.

  • Operational Round-the-Clock

Our test facilities operate 24/7, and we help businesses reduce the product life cycle of testing and validation.

 

Contact Us to Know More

Get more details about our Environmental testing solutions today!

FIND OUT MORE