Information Technology, Audio Video and Multimedia Testing

Information Technology / Audio Video (IT/AV) and Multimedia products are integral to office environments, residential locations, and customer premises. These product categories demand rigorous regulatory testing and certifications in India and other global markets. TÜV SÜD's expert guidance helps businesses navigate through mandatory regulations such as EU, North/South America, and India requirements through a wide range of testing and certification services, which includes EMI/EMC, Electrical Safety, Reliability and RF compliance. We streamline global compliance strategies, ensuring seamless global market access for businesses and also cater to the fast-evolving requirements of the domestic market with our local expertise.

TESTING INFRASTRUCTURE

Complete EMI/EMC testing with a 10m Semi-Anechoic chamber as per product standard IEC/EN 55032, IEC/EN 55035, FCC standards
Sophisticated Wireless testing facilities to support regulatory requirements of BlueTooth, WiFi, SRD and Cellular technologies. Major standards supported include ETSI/EN 300 328, ETSI/EN 301 893, ETSI/EN 302 502, ETSI/EN 300 220, ETSI/EN 300 330, ETSI/EN 300 440, FCC Part 15, Part 22, Part 24, RSS standards
Electrical safety test facilities to test the majority of IT/AV products for National and International requirements as per the standard IEC/EN 62368-1, IEC/EN 60950
Comprehensive Environmental simulation test facilities for Temperature, humidity, altitude, thermal shock, shock and vibration, combined vibration, water and dust facilities
Global Market access services for all IT/AV products

TESTS WE CONDUCT

Tests we conduct
- Electrical Safety Testing
- Electromagnetic Compatibility (EMC) Testing
- Electromagnetic Field (EMF) Testing
- Energy Efficiency Testing
- Environmental Testing
- Failure Analysis
- Global Market Access
- Mechanical Safety Testing
- Post Shipment Inspection
- Pre Shipment Inspection
- Product Carbon Footprint Verification and Life Cycle Assessment Critical Review
- Product Packaging Testing
- Product Performance Testing
- Radio Frequency Testing
- Wireless Testing and Certification

EMI/EMC CAPABILITIES

Tests and Capabilities
- Radiated Emission
  Up to 40Ghz frequency range within 10m Semi-Anechoic chamber
- Conducted Emission
  150Khz - 30Mhz. Three Phase upto 200A
- Current Harmonics
  up to 32A
- Voltage Flicker & Fluctuations
  up to 32A
- Electrostatic Discharge
  ± 30KV. Both Commercial & Automotive
- Radiated Susceptibility
  20Mhz – 6.0Ghz up to 100V/m
- Electrical Fast Transient
  Three Phase up to ± 5.0KV
- Surge Immunity
  Three Phase up to ± 7.0KV
- Ring Wave Immunity
  Three Phase up to ± 7.0KV
- Conducted Susceptibility
  From 10Khz – 230Mhz up to 30Vrms
- Bulk current injection
  From 10Khz – 400Mhz up to 400mA
- Power Frequency Magnetic Fields
  up to 300A/m (Continuous); 1000A/m (Short Time)
- Pulse Magnetic Field
  up to 1000A/m
- AC & DC Dips and Interruptions
  Three Phase up to 32A
- Automotive Transients
  Transient Emission, Pulses (1, 2a, 2b,3a, 3b & 4), DC 80V/50A

ACCREDITATION FOR THE LAB

National Accreditation Board for Testing and Calibration Laboratories (NABL)
American Association for Laboratory Accreditation
Bureau on Indian Standards (BIS)
IECEE CB Testing Laboratory (CBTL)
German Safety (GS)
Nationally Recognized Testing Laboratory (NRTL)

STANDARDS WE TEST AGAINST

India
Regulation:
- BIS Compulsory Registration scheme (BIS-CRS)
- Wireless Planning and Co-ordination Wing (WPC)
Requirement:

1. Electrical Safety

2. Wireless
European Union
Regulation:
- CE Marking
Requirement:

1. EMC Directive

2. Low Voltage Directive

3. Radio Equipment Directive

4. RoHS Directive

5. WEEE Directive
North America
Regulation:
- Federal Communication Commission Regulation
- Occupational Safety and Health Administration
Requirement:

Code of Federal Regulations

1. FCC Part 15

2. FCC Part 22

3. FCC Part 24

4. UL 62368-1

PRODUCTS WE TEST

Major Products
- Data Modem
- IoT Gateway
- Printers
- Lan Switch
- Router
- EPABX
- Mobile Handsets
- Computer System
- Media Gateway
- Laptop / Desktop
- Server
- Keyboard
- Mouse
- Projector

WHY CHOOSE TÜV SÜD FOR IT/AV PRODUCTS TESTING?

Global Footprint and Network of Labs
Benefit from our global expertise and local experience to ensure the safety, quality, security and sustainable demands.
Comprehensive Suite of Services
TÜV SÜD’s test laboratories provide compliance testing, verification, validation, engineering, and re-engineering activities of IT/AV products
State-of-the-art Facilities
Our 10m Semi-Anechoic chamber is designed and constructed to accommodate testing of complex IT/AV products
Operational Round-the-Clock
Our test facilities run 24/7, and we help businesses reduce the product life cycle of testing and validation
Flexible Certification Schemes
IT/AV manufacturers can include a wide range of IT/AV products under a single report and certificate, which helps to streamline regulatory processes for a seamless market entry

Information Technology Audio Video And Multimedia