About the Functional Safety IEC 61508 training
Based on our diverse practical experience in the field of Functional Safety and on our active membership of the relevant standard bodies, we supply you with the necessary expertise in the cross-industry generic standard IEC 61508 2nd Edition.
The training program is based on the first three parts of IEC 61508. Case studies and practical examples are used to demonstrate the procedures for dealing with individual topics and explain the work results and documents which must be delivered. Key processes from the safety life cycle are introduced, and the tasks and responsibilities associated with them are explained.
Training Details
Training and Exam Schedule:
- September / October 2025
Training mode:
- Virtual/Physical
Training options:
- Exam only - SGD 1,000
- Single module - SGD 1,250
- Three modules - SGD 3,150
- Package: 3 modules with exam - SGD 4,000
10% discount applicable for group registrations.
Who should attend
The training is designed for developers, testers, project leads, quality representatives and safety officers primarily focusing on the development of programmable electronic safety systems and aiming to implement these developments based on the internationally recognised IEC 61508 standard.
IEC 61508 Functional Safety Training content and modules
The IEC 61508 functional safety training consists of several modules which can be booked separately or in combination.
The training modules below can be combined with the Functional Safety Certification Program (FSCP) exam to gain a TÜV SÜD certificate. Register for the FSCP exam to be certified as “Functional Safety Engineer”, “Functional Safety Professional” or “Functional Safety Expert”.
Module 1: IEC 61508 Training - Introduction, Definition of Functional Safety Management, System Analysis
Part 1 of IEC 61508 requires implementation of a FSM (Functional Safety Management) system to provide an organisational framework for the development of safety-relevant electronic systems. After an introduction to Functional Safety and general overview of the sector, the program presents the tasks and methods involved in safety management together with conceptual aspects. The main design criteria of standards and approaches for designing a functional concept and the associated system analysis are explained. The day concludes with an introduction to the requirements which must be fulfilled by Requirements Engineering.
The content of Day 1 is aimed at management executives, project managers, safety and QM managers and all staff involved in functional safety projects.
Trainer: Mr Christian Dirmeier
Module 2: IEC 61508 Training - Development and Evaluation of Safety-Relevant Hardware
Module 2 explains how mathematical and analytical methods can be applied to verify hardware designs fulfilling the requirements of IEC 61508 Part 2. A case study is used as the basis for a detailed explanation of the systematic approach to be used in analysis and the method of determining the necessary probabilistic safety parameters.
The content of Day 2 is aimed particularly at responsible operators and users in the field of hardware and software development, heads of functional safety projects and safety managers.
Trainer: Mr Thomas Kreten
Module 3: IEC 61508 Training - Development and Evaluation of Safety-Relevant Software
Part 3 of IEC 61508 presents methods, procedures, documentation and the software safety life cycle, which must all be taken into consideration in developing safety-relevant software. Practical examples are used to introduce the principles underlying the standard and the procedures for dealing with the requirements of this part of the standard.
The content of Day 3 is aimed particularly at users and responsible operators in software and hardware development, heads of functional safety projects and safety managers.
Trainer: Mr Christian Dirmeier
FSCP Functional Safety Certification Program IEC 61508
With our FSCP Functional Safety Certification Program, you can be certified in Functional Safety. After completing the exam, attendees receive a certificate confirming their qualification according to their chosen FSCP level and are entered in the list of certification-holders on our website.
Level 1: FS Engineer IEC 61508
Level 2: FS Professional IEC 61508
Conditions: 6 years of professional experience in the field of functional safety (may be reduced to up to two years depending on educational qualifications – Bachelor’s, Master’s) and proof of collaboration in at least two FS projects.
Level 3: FS Expert IEC 61508
Conditions: on request
The exam will be conducted virtually. All participants in the exam will receive the link to access the exam on the day the exam is scheduled. The exam takes 3 hours and takes the form of a written test on Levels 1 and 2. Our certificates do not have an expiry date.
Our Trainers
Mr Christian Dirmeier
Senior Safety Expert and Trainer for Functional Safety at TÜV SÜD
Mr Christian Dirmeier has over 12 years of experience in functional safety projects related to process industry, machinery and safety system evaluation.
He is the convenor of the IECEE Working Group 32 “Functional Safety” and a Technical Certifier for Functional Safety and Industrial IT Security. He is the trainer since 2011 for various functional safety standards and also a lecturer for software reliability at the University of Applied Sciences in Munich.
Mr Thomas Kreten
Expert for Functional Safety at TÜV SÜD
Mr Thomas Kreten has over 13 years of experience working with TÜV SÜD and he is an experienced Functional Safety trainer.
He graduated from TU München with a Diploma of Electrical Engineering, Communications Engineering.
Benefits of taking the IEC 61508 training course
- Enhance your efficiency – with training courses linking theory with practical experience in the area of functional safety.
- Minimise risks – by keeping your employees up to date with regard to standards and regulations in science and technology, thus enabling them to identify problems before your operations are affected. Avoid product recalls and loss of reputation by applying an optimised tailored process.
- Gain competitive edge – by applying your knowledge of the diverse roles throughout the safety life-cycle, in order to develop the best solutions for you and your customers
Frequently asked questions
How do I enroll for the IEC 61508 Training course?
To enroll, please fill out the form on the webpage accordingly.
What is the IEC 61508 Training course methodology?
Participants will learn through role plays, case studies, group exercises, scenarios and discussions.
Are there any tests in the middle of the IEC 61508 Training course?
There will be an open-book examination at the end of the IEC 61508 Training course.
Can I get a refund if I cancel my enrollment?
Yes, please contact us at [email protected] for more details. Terms and conditions apply.
Can I also attend E-learning courses on top of attending the IEC 61508 Training instructor-led course?
Yes, you can register to any e-learning courses. If you have special requirements, please contact us at [email protected] and we can customise a suitable package for you.
Upon completion of the IEC 61508 Training course, would I get a certificate for completion?
Yes, you will receive a certificate of completion at the end of the IEC 61508 Training course.
Who developed the IEC 61508 Training course and what are their qualifications?
The IEC 61508 Training course content and structure are designed by the domain experts from TÜV SÜD. With immense experience and knowledge in the relevant standards, our team of product specialists and technical experts at TÜV SÜD, developed the IEC 61508 Training course content based on current business landscape and market requirements. The experts also undergo relevant upskilling programmes, benefitting from TÜV SÜD’s 150 years of expertise and global heritage.
