ts-pr-banner-newsroom

Amprion commissions TÜV SÜD as Owner´s Engineer for BorWin4 and DolWin4 converter platforms

Offshore Wind Energy

Offshore Wind Energy

17 October 2024

Transmission system operator Amprion is planning and installing technical systems to connect offshore wind farms in the North Sea to the German transmission grid. On behalf of Amprion, TÜV SÜD is acting as owner's engineer to supervise the construction of two converter platforms, which are important components of the BorWin4 and DolWin4 offshore grid connection systems.

In order for Germany to meet its climate change targets, offshore wind farms are expected to provide as much electricity as 40 large coal-fired power plants by 2030. The wind farms need to be connected to the German transmission grid. The transmission grid operator Amprion is planning and installing, among other things, the two grid connection systems BorWin4 and DolWin4.

Two converter platforms are important parts of these systems. They convert the alternating current from the offshore wind turbines into direct current, which is more suitable for transmission over long distances. They can each transmit an output of 900 megawatts. The converters will be installed on platforms in the North Sea, which must be able to withstand the harsh conditions of this environment.

Amprion has appointed TÜV SÜD as Owner's Engineer to supervise the construction of the offshore converter platforms for the BorWin4 and the DolWin4 offshore grid connection systems. The contract covers supervision of the fabrication of the platforms’ individual components at several locations worldwide, such as supervision of the fabrication of large components at the Meyer Werft in Papenburg, Germany, as well as the supervision of the assembly of the platforms at Dragados Offshore in Cadiz, Spain, and the supervision of the commissioning of the platforms on the high seas.

“We are thrilled to have been awarded this complex project, which simultaneously reflects our company's commitment to the energy transition,” says Sebastian Holtz, the responsible project manager at TÜV SÜD Industrie Service GmbH. The experts in Sebastian Holtz's team have extensive experience with offshore wind farms and transmission grids and a corresponding crossregional network of experienced experts to make inspections at various locations extremely efficient.

Official start of fabrication for DolWin4 was on 2 July 2024 at Dragados Offshore in Cadiz and on 4 July 2024 at the Meyer Werft in Papenburg.

Further information on TÜV SÜD's services in the field of wind energy can be found at tuvsud.com/windenergy.

ts-pr-group-photo-amprionCaption: At the official start of fabrication for the DolWin4 conversion platform on 4 July 2024 at the Meyer Werft in Papenburg (from left to right): Sebastian Holtz, Ferdinand Neuwieser, Sandro Schmidt and Stefan Kirchner (all TÜV SÜD).

 

 

 

 

 

 

Download Press Release

Download Photo

Press-contact: Dr Thomas Oberst

 

pr-press-releases
Learn more
pr-press-contact
Learn more
pr-about-tuev-sued
Learn more

Next Steps

Site Selector