Choose another country to see content specific to your location

//Select Country

Industry Readiness

Adding value with our service portfolio

TÜV SÜD Personnel certification body provides an opportunity to students to verify their competence and industry readiness. Students trained by Training institutes which are recognized by TÜV SÜD Personnel certification body are examined and certified on successful tests. This preparatory trainings and tests are specially designed to address the potential gap between what students have learnt in the colleges and what industry (employer) expect from them. These qualifications gives foundation industry knowledge to students and are comprises of Functional skills, technical knowledge and behavioral aspects for their future roles. We provide industry specific solutions here in the field of Automotive, Engineering, Food, InfoTech, Telecom, Aviation, Aerospace, Oil & Gas, Textile, etc. We further support in Well structure industry orientation and internship programmes for select students.

 

  • Building Energy Management System

    Scheme Code

    BMS-CQ10-01

    About the examination

    BEMS technology is a broad concept of building control, and can have a variety of characteristics. However, the term BEMS is limited to use for sophisticated and advanced control systems. Therefore, while all buildings require and have some form of control system, BEMS technology is substantially different from previous control systems. The main point in which a BEMS differs from other control systems is the characteristic of communication: information of the processes and functions of the building can be received and controls at a central, single operating unit. Therefore, decisions can be made based upon the received information. This is a critical aspect of a BEMS as it allows for optimization of the system. For instance, the central and single operating unit can receive information of temperature and building occupancy and can make the decision to lower the temperature in parts of the building that are not occupied. These decisions, therefore can increase energy efficiency. Figure above illustrates a possible BEMS configuration in which multiple buildings are connected to each other and are connected via the internet to a central operating unit to allow smooth cooperation among the buildings and increase efficiency. Increased cooperation among different buildings through the BEMS allows for additional increased energy efficiency, as functions of the different buildings can be coupled.

    Prerequisites

    • Candidate should have attended minimum of 150 hours of class room training
    • Diploma or Bachelor in Engineering or Technology or Electronics or Electrical or Instrumentation or Mechanical or Mechatronics or Bachelor of Science (B. Sc) OR
    • A proficient with minimum 2 years of experience in the related field

    Competencies required

    • Understanding the overall building energy management control system
    • Monitoring, controlling and analyzing the building energy management control system
    • Preparing estimation of the project based on the complexity and requirements
    • Troubleshoot equipment problems and perform control system tests
    • Installing a building automation equipment and making sure that all integrated equipment operating correctly.
    • Provide corrective actions associated with building automation related deviations/investigations
    • Troubleshoot design or installation problems, and the math skills to budget and manage projects.
    • Design and develop panel layouts, network layouts, wiring diagrams per customer and company standards
    • Program controller modules to meet exact sequence of operation.

    Partner institute information

    Ambit Automation - Please click here to know more

    Examination details

    Duration: 75 minutes for MCQ and 60 minutes of practical exam including viva voce

    Pattern: Each certification candidate is required to pass a written examination that consists of multiple choice questions along with the practical examination (assessment) and Viva voce. The exam is currently offered in English language.

  • Professional Certificate on MEP (Mechanical, Electrical, Plumping)

    Scheme Code

    MEP-CQ10-03

    About the examination

    Mechanical Electrical Plumbing focus on mechanical drawing, mechanical drafting & design services with knowledge of Electrical and plumbing equipment. The Mechanical part of MEP is known as HVAC. It is responsible for the designing, estimation and tendering of A.C. It also involves Electrical parts for outlets and application but also lighting switches, fire alarm, security system, as well as lighting protection when necessary. The plumbing part also handles fine suppression system and storm pipe system as well as gas delivery system in Medical and laboratory setting. The Civil technologies deal of energy and water, along with sophistical and secure methods of delivery. Modern building requires substantial ventilation environmental control as well as safety precaution.

    Prerequisites

    • Candidate should have attended minimum of 180 hours of class room training with minimum 80% of attendance
    • Diploma or Bachelor in Engineering or Technology or Electronics or Electrical or Instrumentation or Mechanical 

    OR

    • A professional with minimum 2 years of experience in MEP

    Competencies required

    • Analyse a building and design a proper HVAC system suitable for the building
    • Designing of ventilation system for kitchen, car parking and toilet
    • Designing of chiller piping and calculation of pump required
    • Developing lighting and power circuit for a building
    • Calculation of substation, generator set and its accessories
    • Designing of plumbing systems for a building
    • Designing of fire protection system
    • Finding the bill of quantity and preparation estimation
    • Coordination of MEP services
    • Drafting and designing of MEP systems
    • Supervising of erection of MEP systems

    Partner institute information

    Ambit Automation - Please click here to know more

    Examination details

    Duration: 60 minutes for MCQ and 60 minutes of practical exam including viva voce

    Pattern: Each certification candidate is required to pass Oral and written examination that consists of multiple choice questions along with the practical examination (assessment). The exam is currently offered in English language.

  • Professional Certificate on QA/QC & Piping Engineering

    Scheme Code

    QA-AC-CQ10-04

    About the examination

    Considered to be the biggest sector in the world in terms of dollar value, the oil & gas industry is a global powerhouse employing hundreds of thousands of workers worldwide as well as generating hundreds of billions of dollars globally each year. In regions which house the major NOCs, these oil & gas companies are so vital they often contribute a significant amount towards national GDP.

    QA/QC is the combination of quality assurance, the process or set of processes used to measure and assure the quality of a product, and quality control, the process of ensuring products and services meet consumer expectations. Quality assurance is process oriented and focuses on defect prevention, while quality control is product oriented and focuses on defect identification.

    Nondestructive testing or non-destructive testing (NDT) is a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage.

    Prerequisites

    • Candidate should have attended minimum of 120 working hours of class room training
    • Diploma or Bachelor in Mechanical Engineering or Civil Engineering or Bachelor in Technology
    • Professional with minimum one year of experience in related field

    Competencies required

    • Inspection of primary secondary process and in-service damages
    • Analyzing structural discontinuities in various materials
    • Analyzing inherent discontinuities
    • Perform process-oriented prevention to achieve quality of product
    • Perform product-oriented detection process
    • Able to handle international codes and standards used in mechanical industry
    • Perform welding inspection and remedies to achieve quality welding products
    • Perform NDT methods like visual testing, penetrant testing, ultrasonic and radio-graphic testing
    • Able to supervise pipe fabrication and fittings
    • Review different piping-oriented diagrams
    • Report making for specified projects
    • Procedure preparation for inspection, welding and piping fabrication
    • KNOW- HOW of QA/QC related records

    Partner institute information

    Ambit Automation - Please click here to know more

    Examination details

    Duration: 75 minutes for MCQ and 60 minutes of practical exam including viva voce

    Pattern: Each certification candidate is required to pass all the three-part of examination as follows -

    • Part 1 Theory Examination
    • Part 2 Practical / Assessment
    • Part 3 Viva Examination

    Your benefits

    • Easier job prospects across multiple industries / sectors
    • Faster promotion over current roles
    • Acquire professional skills and knowledge, as required on the job
  • Certified Embedded System Engineer

    Scheme Code

    ES-CQ10-05

    About the examination

    An embedded system is some combination of computer hardware and software, either fixed in capability or programmable, that is designed for a specific function or for specific functions within a larger system. Industrial machines, agricultural and process industry devices, automobiles, medical equipment, cameras, household appliances, airplanes, vending machines and toys as well as mobile devices are all possible locations for an embedded system.

    Embedded systems engineer certification is mainly intended for designers, programmers, testers, and other engineers who are interested in learning the ground rules of embedded system engineering.

    Prerequisites

    • Bachelor degree or diploma in electrical or electronics or mechanical or instrumentation 

    OR

    • B.Sc and M.Sc Electronics
    • Should complete at least 70% of course up to completion of all theory classes with 90% of their attendance out of 300 hours of course duration.

    Competencies required

    • Understanding of digital and small signal analog electronics.
    • Read and understand schematics.
    • Effectively use a Volt/Ohm meter and an Oscilloscope.
    • Perform at least basic electronics debugging/troubleshooting.
    • Competency in assembly language.
    • Competency in the ‘C’ programming language.
    • An understanding of memory regions, and their uses (heap, stack, IVT, code).
    • Working with hexadecimal numbers and hexadecimal math
    • Read and understand datasheets and produce driver code for a given device based on the information contained in its datasheet.
    • Develop and debug code for peripherals such as UARTs, A/D & D/A converters, timers, PWM generation from a timer, real-time clocks, etc

    Partner institute information

    Ambit Automation - Please click here to know more

    Examination details

    Duration: 45 minutes for MCQ and 60 minutes of practical exam including viva voce

    Pattern:
    Each certification candidate is required to pass all the three-part of examination as follows -

    • Part 1 Theory Examination
    • Part 2 Practical / Assessment
    • Part 3 Viva Examination

    The exam is currently offered in English language

  • Certificate of competency in Heating, Ventilation, Air-conditioning & Refrigeration systems (HVAC/R)

    Scheme Code

    HVAC-CQ12-01

    About the examination

    The HVAC technician certification is an instrumental and practical course, suitable for fresh engineers, diploma holders and working professionals in the HVAC&R industry. Curriculum gives a taste of real world solutions and is designed in simple modules for effective & holistic implementation. This course is totally a job oriented program which equips the students pursuing certification with all the fundamental aspects of AC systems design, enabling to start off with a professional career in this field. To achieve the certification a student has to undergo the course that combines one month of classroom training and one month of practical training in select industry sponsored/ connected organizations which gives a wholesome idea and a very good perspective of the industry practices to the candidates. This certification is a stepping stone for those who wish to make a career in the HVAC/R industry.

    Prerequisites

    • Candidate should have attended minimum of 120 hours of class room training with minimum 90% of attendance and 120 hours of onsite training.
    • Candidates shall be required to have passed an appropriate qualifying Degree Examination like B.E / B.Tech. in Mechanical / Electrical / EEE/ Chemical / Production / Energy/ equivalent DME / DEE from any UGC recognized University / Institute.

    OR

    • Candidates with 1 - 3 years working experience in relevant industry meeting any of the above mentioned qualification.

    Competencies required

    • Designing planning and analysing the building energy management for better cooling systems
    • Preparing estimation of the project based on the complexity and requirements
    • Equipment selection and perform design calculations
    • Installing HVAC equipment and making sure that all integrated equipment operating correctly.
    • Provide corrective actions associated with HVAC related deviations/investigations
    • Troubleshoot design or installation problems, and the math skills to budget and manage projects.
    • Understands the legislative requirements along with the essential steps and responsibilities for the maintenance and repair of HVAC/R systems.
    • Design and develop ducts as per customer and company standards

    Partner institute information

    Maestro Lee - Please click here to know more

    Examination details

    Duration: 60 minutes for MCQ and 60 minutes of practical exam including viva voce

    Pattern: Each certification candidate is required to pass viva voce and written examination that consists of multiple choice questions along with the practical examination (assessment). The exam is currently offered in English language.

  • Certificate of Industrial Automation and Control Engineer

    Scheme Code

    IAC-CQ10-02

    About the examination

    Automation or automatic control, is the use of various control systems for operating equipment such as machinery, processes in factories, boilers and heat treating ovens, switching on telephone networks, steering and stabilization of ships, aircraft and other applications and vehicles with minimal or reduced human intervention. Some processes have been completely automated.

    Prerequisites

    • Bachelor degree or diploma in electrical or electronic or mechanical or instrumentation.
    • Should complete at least 70% of course up to completion of all theory classes with 90% of their attendance.

    Competencies required

    • Person with ability of programming, wiring, configure, and integrating the system with selecting Essential and adoptable automation element (PLC, SCADA, VFD, HMI, and CPDW) for the industrial automation.
    • Monitoring, controlling and analyzing the industrial system/ sequential control system.
    • Selection of industrial automation element type for the project based on the complexity and requirements.
    • Troubleshoot system/ Equipment problems and perform respective solution by applying needed tests.
    • Installing an industrial automation equipment with system integration and make sure that all integrated equipment operating correctly.
    • Provide corrective actions associated with industrial/sequential automation related deviations/investigations with ability of troubleshoot design or installation problems, and the math skills to budget and manage projects.
    • Design and develop industrial control panel and prepare drafted diagrams per customer and company standards for an automation industry.

    Partner institute information

    Ambit Automation - Please click here to know more

    Examination details

    Duration: 45 minutes for MCQ and 60 minutes of practical exam including viva voce

    Pattern: Each certification candidate is required to pass a written examination that consists of multiple choice questions along with the practical examination (assessment) including viva voce. The exam is currently offered in English language.

  • Professional Certificate on QA / QC in Civil engineering

    Scheme Code

    CCM-CQ10-06

    About the examination

    The Construction Engineering and Management area of study prepares students to manage design, construction and operation of sustainable buildings and infrastructure systems in the increasingly global construction industry.

    QA/QC in civil engineering is the combination of quality assurance, the process or set of processes used to measure and assure the quality of a product, and quality control, the process of ensuring products and services meet consumer expectations. Quality assurance is process oriented and focuses on defect prevention, while quality control is product oriented and focuses on defect identification.

    Nondestructive testing or non-destructive testing (NDT) is a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage.

    Prerequisites

    • Candidate should have attended minimum of 120 working hours of classroom training
    • Diploma or Bachelor in Civil Engineering or Bachelor in Technology in Civil
    • A professional with minimum one year of experience in a related field

    Competencies required

    • Designing of 2D & 3D modeling in an architectural building
    • Calculation of quantities and cost of various items with the construction projects
    • Analyze drawings & abbreviations
    • Calculation of quantities of materials in all works
    • Supervising and Managing the construction projects
    • Design Measurement book
    • Managing and rebuilding projects likes roads, dams and other buildings.
    • Understanding in testing of materials & soil
    • Making report of the quality of building materials
    • Involving quality control and quality assurance process
    • Checking the dimensional drawings against completed work
    • Assuring the pile integrity against the dimensional drawing

    Partner institute information

    Ambit Automation - Please click here to know more

    Examination details

    Duration: 1 hour for MCQ and 3 hrs of practical exam including viva voce

    Pattern: Each certification candidate is required to pass all the three-part of examination as follows.

    • Part 1 Theory Examination
    • Part 2 Practical / Assessment
    • Part 3 Viva Examination

    The exam is currently offered in English language.

    Your benefits

    • Easier job prospects across multiple industries / sectors
    • Faster promotion over current roles
    • Acquire professional skills and knowledge, as required on the job

Next Steps

Select Your Location

Global

Americas

Asia

Europe

Middle East and Africa