Telecommunications Testing

Telecommunication products used in Telecom networks must undergo regulatory tests and certifications in India and many other countries. Products such as radio broadcast devices, satellite communication equipment, gateways, handsets, base station controllers, switches, routers, modems, etc. fall under this category. TÜV SÜD's expert guidance navigates through mandatory regulations such as EU, North/South America, and India requirements, and streamlines wireless communication complexities, transforming potential barriers into international pathways for success. From EMI/EMC, Electrical Safety, Reliability and RF compliance, TÜV SÜD has it covered to ensure the credibility of your telecommunication products.

Accreditation for the lab

NABL IAS

a2la ILAc

IECEE TEC

NRTL

TESTING INFRASTRUCTURE

Complete EMI/EMC testing with a 10m Semi-Anechoic chamber as per product standard ETSI EN 300 386, IEC/EN 55032, IEC/EN 55035, FCC standards, TEC Essential Requirements
Sophisticated Wireless testing facilities to support regulatory requirements of BlueTooth, WiFi, SRD and Cellular technologies. Major standards supported include ETSI/EN 300 328, ETSI/EN 301 893, ETSI/EN 302 502, ETSI/EN 300 220, ETSI/EN 300 330, ETSI/EN 300 440, FCC Part 15, Part 22, Part 24, RSS standards
Electrical safety test facilities covering major national and international standards
Comprehensive Environmental simulation test facilities for Temperature, humidity, altitude, thermal shock, shock and vibration, combined vibration, water and dust facilities
Global Market access services for all Telecom products

EMI/EMC CAPABILITIES

Tests and Capabilities
- Radiated Emission: Up to 40GHz frequency range within 10m Semi-Anechoic chamber (CISPR 11,25,32, FCC Part 15 Subpart B, RED Standards like ETSI EN 301 489-1/3/17/52 etc., IEC 60601-1-2, IEC 61000-6-3, IEC 61000-6-4 as well as Customer Specific Requirements [OEMs])
- Conducted Emission: 10KHz - 108MHz. Three Phase up to 200A (CISPR 11,25,32, FCC Subpart B, RED Standards like ETSI EN 301 489-1/3/17/52 etc., IEC 60601-1-2, IEC 61000-6-3, IEC 61000-6-4 as well as Customer Specific Requirements [OEMs])
- Current Harmonics: Up to 32A (IEC 61000-3-2, 3-12)
- Voltage Flicker & Fluctuations: up to 32A (IEC 61000-3-3, 3-11)
- Electrostatic Discharge ± 30KV. Both Commercial & Automotive
- Radiated Susceptibility: 20MHz – 6.0GHz up to 100V/m (IEC/EN 61000-4-3, ISO 11451-2, ISO 11452-2, AIS 004 as well as Customer Specific Requirements [OEMs])
- Electrical Fast Transient: Three Phase up to ± 5.0KV
- Surge Immunity: Three Phase up to ± 7.0KV
- Ring Wave Immunity: Three Phase up to ± 7.0KV
- Conducted Susceptibility: From 10KHz – 230MHz up to 30Vrms
- Bulk current injection: From 10KHz – 400MHz up to 300mA
- Power Frequency Magnetic Fields: up to 300A/m (Continuous); 1000A/m (Short Time)
- Pulse Magnetic Field: up to 1000A/m
- AC & DC Dips and Interruptions: Three Phase up to 32A
- Automotive Transients: Transient Emission, Pulses (1, 2a, 2b, 3a, 3b & 4), DC 80V/50A

FREQUENTLY FULFILLED MARKET ACCESS REQUIREMENTS

India
Regulation:
- BIS Compulsory Registration scheme (BIS-CRS)
- Wireless Planning and Co-ordination Wing (WPC)
Requirement:
1. Electrical Safety
2. Wireless
3. Essential requirements we serve:
  - TEC/SD/DD/EMC-221/05/OCT-16
  - TEC ER No. TEC59432407
  - TEC ER No. TEC54372501
  - TEC ER No. TEC24492408
  - TEC ER No. TEC34622401
  - TEC ER No. TEC56782407
  - TEC ER No. TEC47722408
  - TEC ER No. TEC17672407
  - TEC ER No. TEC14762407
  - TEC ER No. TEC37682410
  - TEC ER No. TEC28822407
  - TEC ER No. TEC28362408
  - TEC ER No. TEC28982407
  - TEC ER No. TEC28732408
  - TEC ER No. TEC58432407
  - TEC ER No. TEC37942410
European Union
Regulation:
- CE Marking
Requirement:
1. EMC Directive
2. Low Voltage Directive
3. Radio Equipment Directive
4. RoHS Directive
5. WEEE Directive
North America
Regulation:
- Federal Communication Commission Regulations
- Occupational Safety and Health Administration
Requirement:

Code of Federal Regulations
1. FCC Part 15
2. FCC Part 22
3. FCC Part 24
4. UL 62368-1

WIRELESS IoT CAPABILITIES

Tests and Capabilities
- Testing and Certification of all Wireless Technologies including BlueTooth, WiFi, Short range devices, Near field communication devices, Cellular frequencies (2G, 3G, 4G, LTE etc)
- Testing of all Conducted and Radiated Parameters
- Testing and certification as per India, Europe, North America, Global and OEM requirements

ENVIRONMENTAL LAB CAPABILITIES

Tests and Capabilities
- Package testing as per ASTM and ISTA standards (DC 1 to 18 and IA,2A,3A & 3E)
- Ingress protection testing as per IEC and IS standards (IP1X to 4X & IPX1 to IPX9)
- Corrosion tests (Salt) (IEC, EN, IS, ISO, JSS, MIL, QM333, DO160 & ETSI) Temperature Range: +25°C to +70°C Humidity Range: 45% to 100%
- Climatic tests (Altitude, Thermal shock, Temperature/ Humidity and Vibration tests) as per QM333, DO160, IEC, ISO, IS, EN, JSS, MIL, ETSI standards Climatic Range: Temperature: -70°C to +180°C | Humidity 10% to 98% | Altitude: Altitude 1mbar to 1200mbar (-40°C to +70°C)
- Vibration tests (Sine, Random, Sine-on-Random, Random-on-Random, Mechanical Shock and Bump) Vibration Range: Frequency: 1Hz to 2000Hz | “g” Range: Sine 100g, Random 40grms | Mechanical Shock & Bump Range : 0.1 to 100G with 1 to 30ms

WHY CHOOSE TÜV SÜD FOR TELECOMMUNICATIONS TESTING?